On the Frame, a SteamOS update replaces SteamVR, KWin, and gamescope with the
rest of the OS image. scripts/update-check.py, run by doctor.sh and report.sh,
checks what Frametop uses from it: the OpenVR interface versions the installed
programs were built against, the vrcmd --overlays format, the eye tracker's
shared memory layout, host files, services, sockets, and the driver
registration. doctor.sh --mark-good records the package versions once things
work, and later runs say what changed and what to try by hand.
The session no longer stops when mesavars.sh or flatpak.sh is missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
KWin's PlacementTracker keeps each window's geometry, full screen and
maximized state per layout of the outputs, and puts windows back when a
layout it has seen comes back. A spare output resizes after its window,
so resizing a floating window back to an earlier size (or changing its
scale, or full screen) made the window and its output flip forever, and
floating or docking one window could move others onto or off a spare.
The KWin script now keeps where each window belongs, reports nothing
while KWin changes the outputs, and on screensChanged puts floating
windows back (and the screens' windows when only spares changed),
cancelling KWin's requests before the app sees them. A size asked for is
held for a second against late answers.
With that: a launched app and a profile get their remembered scale back,
scale steps keep the size in pixels, ft-floatd waits for the end of an
edge resize before resizing the output (KWin cancels the resize on any
output change), a window taken over after a restart keeps its app and
panel density, and `ft-float float ID` asks the script for the window's
current place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- KWin 6.2's scripts have no maximize mode: a window counts as maximized
when it fills its output's maximize area.
- A late event for a window that just closed brought it back into
ft-floatd's table, so a profile "found" it open, floated a window that no
longer existed, and held a slot. The script doesn't report deleted
windows, and ft-floatd ignores events for ids it has seen close.
- Docking a window that came from a screen that's hidden now puts it on the
first screen that shows instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A profile is a named layout plus the screens it hides and its apps' windows
(docs/profiles.md). ft-layout save captures them (ft-floatd's "windows",
after the KWin script reports every window as it is now); use opens them:
the screens move, open windows of each app go to their places (on a screen,
maximized or not, or floating), and missing apps start, once and then again
for each window still missing 3 s after the first. Nothing closes.
The desktop starts in FT_PROFILE or default_profile (ft-layout start, from
the session script). Each profile gets a launcher entry (Frametop: NAME, in
SteamVR's Launch a program list) that switches to it or starts the desktop
in it. The relay's profile:NAME action and Input Settings' "Open profile"
entries put one on a key, mouse button, or controller button. Display
Settings' Layout page becomes Layout & profiles: Save as profile, Open
profile, the profile's apps, and Start in profile. Plasma's own session
restore is off in the Frametop session.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens: "conceal <screen|all>" hides a screen on its own, whatever the
visibility mode or the hotkey says, until "reveal"; "concealed" lists them.
(Not "hide N": older builds read anything starting with "hide" as the hotkey.)
ft-layout keeps it per screen ("hidden" in the layout), applies it when it
arranges the screens, and has hide/show N|all and hidden. Display Settings
gets a Shown switch per screen on the Visibility tab. ft-floatd floats a new
window that opens on a hidden screen, and puts a stray window on a screen
that shows. Profiles (next) use it to show only some screens.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-float launch APP / run COMMAND: ft-floatd starts the app and floats its
first window (matched by process or desktop file name for 30 s) where that
app last floated, or in front of you at the primary screen's density. Each
app's place (pose relative to the primary screen, size in pixels, scale) is
kept in ~/.config/frametop-float.json whenever one of its windows stops
floating; the scale isn't applied yet, since rescaling can loop (written up
in docs/floating-windows.md, Known problems).
Launch as Standalone (float/ft_apps.py): the session writes copies of the
apps' desktop files with that action and puts them first in XDG_DATA_DIRS,
so it shows in the Application Launcher's and the taskbar's right-click menus
in the Frametop desktop only. ft-floatd rewrites them when apps change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The decoration's "bottom" property clashed with Item's (KWin refused it).
- No On All Desktops button with one virtual desktop, like Breeze.
- decoration/apply.sh finds the session's D-Bus through plasmashell (KWin's
environment isn't readable), and installs each try under a new name: KWin
keeps a decoration's QML by name until it restarts.
- ft-floatd starts its script with Scripting.start: after a reload, the new
script gets the old one's id while the old one is still being deleted, so
run() on /Scripting/Script<id> went to the old script and the new one never
ran (a second ft-floatd start left floating windows without their script).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frametop's own window decoration (decoration/), a QML decoration for KWin's
Aurorae engine drawn like Breeze, puts a float button left of Close. It's the
Keep Below button with its own glyph: the KWin script floats a window when
keep-below is set and docks it when it's cleared, and keeps the flag set on
every floating window, so the button shows "back to the desktop" there. The
session script installs the decoration for the Frametop desktop only;
decoration/apply.sh switches a running desktop to it or back to Breeze.
Not yet tried in a running KWin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The input relay owns the float key now: float_toggle (Meta+Shift+F unless the
rules have their own key combinations) floats the window under the pointer, or
the active one over the wallpaper, and docks it if it floats. dock_all puts
every floating window back. Both are mappable to mouse and controller buttons,
and work without pointer mode. The KWin script no longer registers a shortcut,
and ft-floatd drops the old one. Key combinations move to Input Settings'
Keyboard page.
docs/floating-windows.md records the decisions from 2026-09-30 (the title bar
button, Launch as Standalone, profiles), and docs/profiles.md plans profiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Steam reads the Frame controllers itself, outside SteamVR's bindings, and every
press and release it sees takes SteamVR out of laser mode, so controller clicks
at the gaze can't be done cleanly (docs/gaze-controllers.md, from the gaze-first
branch's tests).
- Gaze precision and Gaze drag take a mouse button or a key combination only;
the controller source, its aim steering, and POINTER_PRECISION_GAIN,
POINTER_PRECISION_DEADZONE and POINTER_GAZE_DRAG_GAIN are gone.
- The gaze actions (including Gaze pointer on/off) can't be mapped to controller
buttons: the relay ignores them there and doesn't ask the helper for those
buttons, and Input Settings no longer offers them.
- Last used wins in gaze mode too: picking up a controller hands it the laser,
as docs/design.md already said.
- The gaze dot shows all the time (POINTER_GAZE_DOT=always, the default;
moving brings back the old behaviour), with a switch on the Gaze page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The local RDP login between krdp and the VNC bridge uses the account's
own name instead of "steamos", its certificate the hostname instead of
"steam-frame", and the ft_pointer driver installs under the user's home
instead of /home/steamos. The remote-access address already came from
the tailnet (tailscale0 and tailscaled's local API).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A GTK 4 / libadwaita app (remote/ft-remote-settings, on the host's own
Python like the gaze probe): remote access on and off (REMOTE, applied at
once when the desktop allows it), the tailnet name and address to connect
to, and the VNC password shown, copied, or replaced. The password stays
random and made on the Frame, in ~/.config/frametop-remote; none is in
the code.
session/remote-ctl.sh starts, stops, and reports remote access; the
session uses it and leaves a remote-capable marker, since KWin allows the
capture only in a desktop that started with REMOTE=1. The password
between krdp and the VNC bridge (local only, but on krdp's command line)
is now new at every start. The installer adds the app to the menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
krdp streams every screen, so the VNC screen is now the primary's size and the
FreeRDP window is shifted so the primary fills it (ft-layout remote-view gives
the offset). It resizes and reconnects when the layout changes. With remote
access on, KWin's D-Bus screenshot interface is open too, for scripts that look
at the screens without the headset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 6f5a23c80f2ecd26e6a96c86b102be36d518ee25)
Our own eye tracker joins the gaze folder: ft-eyegrab (the root frame
grabber, frametop-eyegrab.service) and ft-eyes, run by the gaze service
when GAZE_TRACKER=own, with its lab tools.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The hand role the pointer takes isn't something to choose by hand. The
helper still reads POINTER_ROLE (right by default) for experiments.
Tried and reverted (not committed): in gaze mode, taking the stylus role
by reconnecting. SteamVR gave the device no role at all (hint 5, role
none) and kept the dashboard laser on the held controllers, so the mouse
couldn't click either. The dashboard laser needs a hand role, and a held
Frame controller takes its hand's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Two new actions for mouse buttons, controller buttons, and key
combinations: gaze_precision (hold: the pointer stops where you look and
the button's device steers it, a controller by where it points at
POINTER_PRECISION_GAIN, the mouse by its moves; release: click there) and
gaze_drag (the same with a real press at once, dragging until the
release). The relay sends "precision|gazedrag <source> 1|0" to the
helper, which runs them through the same holds as pinches and grips.
- Key combinations on any keyboard ("key_bindings" in the rules, e.g.
Ctrl+Alt+G for gaze on/off): the last key isn't typed.
- POINTER_GAZE_MOUSE: in gaze mode the left button is a precision button
(the default, as before) or clicks right away (direct).
- In gaze mode a moving controller no longer takes the pointer away.
- POINTER_ROLE (right, left, stylus): the driver takes a "role" command,
so the pointer can stay off the hand holding the precision controller,
which would otherwise take the role back. Needs the rebuilt driver.
- Input Settings: the actions on the Controllers and Buttons pages; on the
Gaze page the mouse choice, the role, the precision sliders, and key
combinations (captured from any keyboard).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hand tracking no longer starts with SteamVR: hands/run.sh install leaves
the units disabled and links hands/ft-handsctl into ~/.local/bin, which
turns it on and off (on | off | status | log | cutouts on|off | gestures).
With it on, hands show through the screens; pinches and grips move the
pointer only with POINTER_HANDS=1, now off by default. ft-camd's service
runs the mono cameras only: while the headset is worn, the colour module
writes just a half-size image into the top-left quarter of its buffers,
which ft-camd can't use yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The palm-down filter is off by default: the user's deliberate pinches,
hand raised, read 0.90-0.99, like typing.
- Typing is told apart by the keyboard instead: the input relay sends the
pointer helper "typing" on key presses, and it takes no pinch within
POINTER_PINCH_TYPING (1 s) of one.
- Grips are still held to hands raised (POINTER_GRIP_BELOW, 0.35 m below
the eyes); pinches aren't, since the user's own sat 0.35-0.45 m below,
elbow resting.
- A grip doesn't begin with the thumb on the index tip: that's a pinch
with the other fingers curled, which was taken for a grip.
- A pinch's point is the index and middle knuckles: the tips' midpoint
moved 1-2 cm as the pinch opened, dragging every release off its press.
- ft-hands --gesture-log prints what the detectors measure, 10 times a
second.
Pinches still aren't reliable enough to use; hand tracking is parked for
now in favour of the controllers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pressed when the pinch closes, released when it opens, its hand dragging
the pointer in between (at the pinch gain, past the dead zone), like the
mouse's button. That's what the gaze probe's Click practice needs: it
freezes its own gaze dot at the press and drags it by the pointer's
movement until the release. With gaze mode on, the pinch still holds the
press back and clicks on the release.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pointer helper reads ft-hands' gestures. A pinch holds the pointer
where the gaze put it and clicks on the release; held, the hand nudges
the pointer at half its angle past a 1.5 degree dead zone, which also
teaches the gaze tracker. A grip presses where the pointer is, drags with
the hand, and releases when the hand opens, unless it began more than
30 cm below the eyes (hands on a desk). Hand movement is taken in the
room with the head pose at capture time. Hand use keeps the pointer from
the relay's idle release, as gaze mode does. POINTER_HANDS and friends in
frametop.conf.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-hands tracks with the mono IR cameras in dim light and with every
camera (or the colour pair, HANDS_BRIGHT) in bright light, going by the
colour frames' mean brightness with hysteresis and a 2 s hold
(HANDS_CAMERAS=auto, the default; mono, color and all fix it). Colour
frames are placed on the mono cameras' clock by their dequeue time, and a
view in a camera a step lacks waits for that camera's next frame.
A grip (a closed hand) is a second gesture next to the pinch, in version 2
of the gestures file: every fingertip curled toward the wrist, beginning
only on a hand seen open within a second and held up in front. On the
2026-09-30 lit recording that leaves 6 false grips of 14, all with the
hands on the desk; pinch counts are unchanged. ft-handreplay logs grips
and finger curl, watch_gestures.py shows them, and tools/cut_sets.py
copies a few sets out of a recording.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A colour camera probes at most 4 buffers a frame (each probe syncs a
~9 MB buffer's cache, which made the mono cameras miss frames), and one
that goes stale twice in a row is paused (10 s, doubling to 160 s) and
learned again instead of ft-camd exiting. The colour cameras run at 2 fps
until a reader asks for more in frametop-hands/color-fps, which saves
most of their decoding while only their brightness is needed. Each mono
camera's latest near-black frame's mean goes in the ring (dark_mean), a
measure of the room's IR light. The service now starts with --with-color;
HANDS_CAMERAS=mono leaves the colour cameras out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hand tracking (ft-camd, ft-hands, and their tools) joins the desktop. The
hands file and ring move to /run/user/UID/frametop-hands/, which ft-screens'
hand cutouts now read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The runtime files move to /run/user/UID/frametop-hands/: the desktop
session deletes /run/user/UID/frametop at every start.
- The cutout copy shader runs at highp: mediump (16-bit on Adreno)
stepped 1.7 texels across a 3440-pixel screen.
- One hand no longer pinches both sides after its left/right call flips
mid-pinch, and --pinch-palm-down (0.6) holds back pinches with the palm
facing down (typing on a lap keyboard).
- ft-camd judges a colour frame fresh by its luma rows only, and logs
per-buffer changes at stale colour frames with FT_CAMD_DEBUG=1.
- hands/run.sh caps skips the setcap when ft-camd already has them.
- The replay tool dumps poses (--poses), and its pinch events carry the
hand id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Floating windows join the keyboard and the hand cutouts. Floating panels
don't get cutouts yet: their panel and popups show crops of the client
buffer (texture bounds), which the side-by-side cutout buffer doesn't
match. KWin gets both the spare outputs and our input method, and the
pointer helper's frametop. prefix already covers the float panels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes#7: SteamVR's keyboard never came up for the desktop's apps, and
opening it for our panels doesn't work well on the Frame (it's Steam's own
panel, mounted in the dashboard's scene, it follows the laser between
panels, and it takes the controllers over to SteamVR's laser).
- KWin starts input/ft-textinput as the desktop's input method. It tells
the input relay when a text field gains or loses focus, and the relay
asks ft-screens to open or close the keyboard. The session drops the
QT_IM_MODULE=xim and GTK_IM_MODULE=xim that the gamescope session sets,
or Qt and GTK apps never report text fields.
- The keyboard is ft-screens' own panel (screens/keyboard.cpp): a US laptop
layout, typed with a controller's laser or the 3D mouse. It opens 0.7 m
in front of you, below your eyes and facing you. It has a grab bar to
move it, a Close key, latching Shift, Ctrl and Alt, and repeat on a held
key. It's drawn into shared DMA-BUFs, so it doesn't flicker. Its keys
reach the focused screen as key presses, so every app takes them.
- It steps aside while the Steam menu or Steam's own keyboard is up and
comes back after. A layout reset closes it, and it doesn't open without
a head pose.
- Frametop Input Settings has a Keyboard page: open it for every text
field, only while no keyboard is connected (the default), only from a
mapped button (the new Open/close keyboard action, for mice and
controllers), or never. A switch keeps it open until you close it.
- The pointer helper treats every frametop.* overlay as a real panel. The
keyboard's shared texture reports 0x0 like SteamVR's scene-graph
controls, and the helper had given it their wide catch radius.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- KWin's nested backend makes an output the size it's configured to times its
scale, so after Meta+scroll every size ft-floatd sent was multiplied again,
and an odd result disconnected KWin (buffer not divisible by its scale).
ft-floatd now asks for sizes in the output's scaled terms (kwin_size), and
asks again after each scale change.
- SteamVR reports mouse positions on a panel with texture bounds in the whole
texture, not the crop, so clicks on a floating window landed up to ~200 px
off. The mouse scale is now the buffer's size, as on a screen.
- A floated window starts 30 cm in front of its screen (was 5 cm), so it's
easy to point at apart from the screen behind it.
- No 1 s wait before a spare turns on (a disabled output never commits), and
the login splash on the spares isn't taken for floating windows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
frame-eyes, a separate project until now, becomes gaze/tracker:
- ft-eyegrab (was fe-bufprobe) copies the eye-camera frames, read-only, out of
SteamVR's eyetracking process. It runs as the system service
frametop-eyegrab.service, which gaze/tracker/install.sh installs to
/etc/frametop with sudo. It keeps only CAP_SYS_PTRACE, CAP_DAC_READ_SEARCH, and
CAP_CHOWN, and copies frames only while /dev/shm/frametop-eyes-want is fresh,
holding none of the tracker's buffers otherwise.
- ft-eyes (was fe-trackd) runs under ft-gazed in the dev container, with
build/venv's pinned numpy and OpenCV: while Eye tracker is Own tracker, or on
the probe's lease ("eyes SECONDS"). No sudo password or fe-live script at
run time any more.
- lab/ holds the research tools (ft-eyes-score, -e2e, -record, -replay,
-session) and findings.md. Recordings live outside the repo, in
~/.local/share/frametop/eyes/captures; .gitignore catches stray frame dumps.
Its socket is now @ft_eyes, its output /dev/shm/frametop-eyes-gaze, and its state
~/.local/state/frametop/gaze/eyes. On practice1 -> practice2 the whole live path
(ft-eyes-e2e) gives 1.30 deg median and 3.18 for the worst tenth, as before the
move (1.30, 3.21).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens' hand cutouts read /run/user/UID/frametop/hands through
hands/include/fh_hands.h instead of their own copy of its offsets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Programs: ft-camd (the camera broker), ft-hands (the tracker), and
ft-handreplay and ft-ringplay for recordings, built by hands/build.sh
into hands/build/ with one Makefile. The first build fetches ncnn at
frame-hands' pinned tag and builds it with the same options.
- ft-camd gets its privileges from file capabilities (CAP_SYS_PTRACE,
CAP_PERFMON, CAP_DAC_READ_SEARCH) that hands/run.sh install sets with
sudo, and drops them once set up. It still works under sudo. It runs
on the host, linked statically, as frametop-camd.service. ft-hands
runs in the dev container as frametop-hands.service. Both start and
stop with SteamVR.
- Files move to /run/user/UID/frametop/ (cam-ring, hands, gestures),
not $XDG_RUNTIME_DIR, which a terminal in the Frametop desktop has
its own of. SIGUSR1 recordings go to ~/.local/share/frametop/hands.
- The calibration is read through /run/host in the container.
- Settings: HANDS_SWAP_SIDES and HANDS_CPUS in frametop.conf.
- install.sh offers hand tracking as an optional last step.
- The container gets jsoncpp-devel, glibc-static, and NumPy and OpenCV
for the Python tools.
- tools/ring.py reads the ring, and models/NOTICE credits the
Apache-2.0 models.
Checked: ft-handreplay gives identical summaries and byte-identical
depth dumps to frame-hands' fh-replay on both 2026-09-29 recordings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frametop Input Settings' Gaze page gets two settings, saved in frametop.conf and
read again by ft-gazed when the file changes: Eye tracker (GAZE_TRACKER: SteamVR's
or our own, frame-eyes' fe-trackd) and Eye bias (GAZE_EYE: auto, left, right).
ft-gazed now combines the eyes, each calibrated on its own: SteamVR's set 2 eyes
with the probe's Left eye and Right eye calibrations, or our tracker's eyes as
they come. Without per-eye calibrations, or with --source, it keeps the older
one-source path. A pointer nudge finds its look from the raw gaze the helper
echoes back; with our tracker it goes to fe-trackd as a click.
The bias leans instead of choosing (gazecal.EyeWeights): on 306 live clicks the
eyes' errors partly cancelled, both together 0.65 deg off against 0.96 and 1.11
for either alone. Left or Right counts that eye twice; auto weights each eye by
its RMS miss at its last 20 nudges, since the calibration's fit picked the wrong
eye on SteamVR's test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
trackd/ becomes track/, and the calibration helper the Python tools
import moves from the prototype's folder into tools/. The model
development tools (nettest and the scripts that compare it with the
Python models or cut int8 calibration crops) stay in frame-hands with
the prototype they need.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The history of frame-hands (~/Desktop/Projects/frame-hands on the
Frame), filtered to what moves: the camera broker (camd/), the tracker
and its offline tools (trackd/), the shared file layouts (include/), the
ncnn models, the analysis tools, and the calibration and model helpers
they import from the Python prototype. The reverse-engineering notes,
probes, camprobe, and the rest of the prototype stay in frame-hands.
Unchanged here: the renames to ft- names and Frametop paths follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
frame-hands (the headset cameras' hand tracking, a separate project so
far) becomes a native component under hands/. docs/hands-migration.md
has what it is, where each part goes, names, build, how ft-camd gets
its privileges (file capabilities), interfaces, open items, and steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- fh-camd --with-color publishes the Arcturus colour pair (luma, half
size, 30 fps) to the ring, flagged FH_CAM_COLOR. fh-tracker records
them, and fh-replay --cams mono|color|all tracks with them, using the
module's EEPROM calibration (load_color_calibration).
tools/check_color.py checks which node is left and how the crop maps.
- Pinch detection per hand (trackd/pinch.h), published to
$XDG_RUNTIME_DIR/frame-hands/gestures (include/fh_gestures.h). It has
begin and end counters, times, the pinch point, and the begin point
for drags. tools/watch_gestures.py shows it live, and fh-replay
reports it.
- fh-replay --depth and tools/depth_report.py measure the depth without
ground truth: noise along the line of sight against across it, the
one-camera guess, and a simulated camera loss.
- fh-tracker --swap-sides, --ring, --keep-presence, --record-only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
wlroots asserts that nothing still listens to its xdg-shell and decoration
globals when the display goes, so every desktop stop ended with ft-screens
aborting and leaving a core dump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Full screen fills the window's own panel (the margin drops to zero).
Meta+scroll over a floating window changes its scale at the same size in
pixels. Spare outputs are sized to a multiple of KWin's buffer scale, and
screens to even sizes: an odd buffer at a fractional scale is a protocol
error that disconnected KWin. The 3D mouse's drag lock now crosses onto
other Frametop panels unless the pressed one is being carried.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens makes a panel for each spare output (frametop.float.N), hidden
until ft-floatd floats a window on it. The panel shows only the window's
rectangle of the buffer at the density of the screen it came from, its
popups and dialogs get small panels over it, pressing its title bar
carries it while KWin's pointer stays put, the corner tab resizes the
window in pixels, and two more buttons close it and put it back on the
desktop. The session adds FLOAT_SLOTS spare outputs to KWin and starts
ft-floatd; ft-layout arranges only the screens' outputs, and the pointer
helper treats the new panels like screens. Not yet tried in the headset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-floatd loads the script into the desktop's KWin, which reports windows
over D-Bus and takes commands through a long poll. Floating a window (the
window menu's Float in VR, Meta+Shift+F, or ft-float) turns on a spare
output sized to the window plus a margin, moves the window onto it, and
tells ft-screens the panel's crop, density, and place; docking puts it
back and turns the spare off. Tested on the headless test desktop; the
panel side in ft-screens comes next.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
KWin's nested backend ignores the position in wl_pointer.enter, and
wlroots drops a motion to the position it entered at, so KWin kept its old
pointer until the next move.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens --no-vr runs without SteamVR and leaves the input relay alone;
--control names its control socket; "toplevels" lists KWin's windows with
their titles and sizes; "input" feeds pointer events as if from a panel.
screens/test/headless.sh starts it with a bare nested KWin next to the
running desktop, and loads KWin scripts, runs apps, and takes screenshots.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Own tracker, the probe polls its status each second. After the headset was off
(or the tracker restarted), it shows one dot at the centre until you look at it and press
(S skips): that click resets both eyes' shifts, so the first real clicks aren't 10-17
degrees off. The screen-to-direction geometry the calibration used is shared with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While a button is held on a screen, the laser leaving it no longer takes
KWin's pointer, and an invisible catcher overlay sits on the laser whenever
it's off every panel, so the release reaches KWin at the pointer's last
spot. The pointer helper also reports the mouse's left release as a
backstop. Not yet tested in the headset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
probes/core_ab.py with the headset on (3 rounds, the same replayed frames in
every block): on 5-7 a step took 8.4 ms against 13.2 ms on 2-4, where XRService's
head tracking also runs, and latency fell from 14.1 to 9.6 ms. The compositor's
late frames and CPU/GPU time per frame didn't change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The calibration dots for the Own tracker go out to the Calibration ring angle each way on
an oval, not to the window's corners, which were too far to look at while facing the
centre. The Own tracker learns from drags up to 25 degrees (after taking the headset off
and on, its first clicks were 11-17 degrees off, and the 6-degree limit blocked them). The
probe starts on the Own tracker when it's running, and the calibration header names the
tracker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
fh-ringplay plays a recording into a frame ring in real time, and fh-tracker
--ring reads it (cameras without a device node are mapped by name). With the
same frames in every run, probes/core_ab.py compares the tracker on CPUs 2-4,
on 5-7, and not running, measuring the tracker's step time and latency, the
compositor's late frames and CPU/GPU time, XRService's timing warnings, CPU
temperature and clocks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
fh-camd (camd/) borrows XRService's camera buffers and publishes the tracking
cameras' frames to a shared ring. fh-tracker (trackd/) finds hands in them with
MediaPipe's palm and landmark models on ncnn, triangulates them in 3D, and
publishes them for ft-screens. fh-replay replays recordings offline. tracker/ is
the earlier Python version; tools/ and probes/ hold the checks and experiments.
As of this commit: crop contrast defaults to CLAHE for the palm search and plain
crops for the landmarks, --swap-sides works around fh-camd naming the side
cameras backwards after some XRService restarts (tools/check_sides.py detects
it), and --record-only, --with-dark, --cpus and --keep-presence support the
bright-light and CPU-placement tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Its fit goes wrong past its dots, and the ring (limited by the window's height) never
reached the sides, where frame-eyes' worst practice clicks were. With the Own tracker
the calibration now uses the centre, corners, and side middles of the practice area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gaze reads frame-eyes' /dev/shm/frame-eyes-gaze and reports it as the source "own",
with each eye's gaze, where each lands on the screen, and its slip. The probe gets a
SteamVR / Own tracker toggle. With Own tracker on, it hides SteamVR's gaze and draws a
red dot per eye, its calibration fits fe-trackd's own calibration, and practice clicks
teach fe-trackd instead of the probe's correction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The tracked hands arrive 30-60 ms after the cameras saw them and reach the
displays later still, so holes trailed moving hands. Track each hand's palm
velocity in the room and move its capsules ahead to about when the frame is
on the displays, every tick, so the holes also move smoothly between tracker
updates. Slow hands aren't moved (their velocity is noise). The control
socket gets cutouts predict on|off and cutouts lead <ms>.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A head-locked performance overlay kept catching the 3D mouse. It has no
input method, so SteamVR's laser passes through it, but the helper hit
tests every visible overlay with ComputeOverlayIntersection, and the dot
stuck to it whenever it crossed that corner of the view.
POINTER_IGNORE in frametop.conf now lists overlay keys the helper leaves
out of the collision, comma-separated shell patterns, so "vendor.app*"
covers a whole app, including panels it opens later. The laser starts
just before the cursor point, so an ignored panel nearer to you doesn't
catch it either.
Frametop Input Settings has a new Ignored panels page. It asks the
helper for SteamVR's overlays ("overlays", answered from the list's
thread once vrcmd has run again, even while the pointer is off), groups
them by app, and has a checkbox per panel and one for the whole app.
Frametop's own screens aren't offered, since ignoring one would leave
nothing to click the app on with the mouse. Entries for apps that
aren't open are listed so they can be removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A capsule end near the eyes' plane projects far across a screen with a huge
radius, so one bad hand estimate there tore a hole through the screens for a
moment. Clip capsules 12 cm in front of the eye, as the tracker now does too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Where frame-hands tracks a hand between an eye and a screen, that eye sees the
room through the screen. handcut.cpp draws the screen's buffer side by side
(one half per eye) with the hands cut out, only while a hand is in front of it.
The cutouts command turns it on or off. ft-handtest tries it on a test panel.
Not yet tested in the headset.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The file picker hands a sandboxed app the host path of the document
portal, which the desktop's private runtime directory moves to
$runtime/doc. Inside the sandbox that path is an empty private folder,
so Brave finished downloads into it and they were lost when the session
cleaned up. Link it to /run/flatpak/doc in each installed app's
runtime folder before Plasma starts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When SteamVR crashes, safe mode can block the newest add-on, and then it
skips the ft_pointer driver at every start. The cursor still moves (the
pointer helper draws it), but clicks, scrolling and mapped actions go
through the driver's virtual controller, so none of them do anything,
and nothing said why (#4).
Input Settings now shows a warning at the top of every page with the
fix: Manage Add-Ons in SteamVR's settings, unblock ft_pointer, restart
SteamVR. It reads steamvr.vrsettings (~/.config/openvr/config on the
Frame) for blocked_by_safe_mode, a disabled driver, or SteamVR's own
safe mode. When none of those is set but SteamVR is running (the helper
answers) and @ft_pointer doesn't, it says SteamVR runs without the
driver: unblocked but not restarted yet, or not installed. The driver
ignores the "ping" it sends. It checks at startup and every 30 minutes,
since the driver only changes when SteamVR restarts.
Fixes#4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When SteamVR crashes, safe mode can block the newest add-on, and then it
skips the ft_pointer driver at every start. The cursor still moves (the
pointer helper draws it), but clicks, scrolling and mapped actions go
through the driver's virtual controller, so none of them do anything,
and nothing said why (#4).
Input Settings now shows a warning at the top of every page with the
fix: Manage Add-Ons in SteamVR's settings, unblock ft_pointer, restart
SteamVR. It reads steamvr.vrsettings (~/.config/openvr/config on the
Frame) for blocked_by_safe_mode, a disabled driver, or SteamVR's own
safe mode. When none of those is set but SteamVR is running (the helper
answers) and @ft_pointer doesn't, it says SteamVR runs without the
driver: unblocked but not restarted yet, or not installed. The driver
ignores the "ping" it sends. It checks at startup and every 30 minutes,
since the driver only changes when SteamVR restarts.
Fixes#4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A display mount that covers the proximity sensor makes the headset seem
worn, so SteamVR never turned its displays off and they stayed on all
night. The new power service, ft-powerd (frametop-power.service), goes by
use instead: after DISPLAY_OFF_MIN minutes in which the headset and
controllers didn't move and no input device was used, it turns the
backlight off, and the next movement or input turns it back on.
The new Power tab in Frametop Display Settings sets that time and has a
Stay awake while plugged in switch. The switch sets Steam's own "When
Plugged In and Idle -> Sleep after" to Never through Steam's UI, so the
Frame stays reachable remotely while the power button still works.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Named layouts: Save current arrangement in Frametop Display Settings now
asks for a name, and saved layouts are listed with the presets under
Arrangement, with rename and delete next to the list. A named layout is
the custom arrangement under a name: each screen's place relative to
your head, width, curve, and pin, but not resolution or scale. Using one
copies it into the custom arrangement, so desktop start, Meta+Shift+R,
and Arrange now apply it unchanged; "active" remembers the name, and a
plain capture clears it. ft-layout gains save, use, layouts, rename, and
delete. A layout saved with fewer screens than there are now leaves the
others where they were saved last, or where the preset puts them.
Head pin: ft-screens' pin command takes "head" as well as left and
right, and pins the screen to the headset (device 0) where it is, like a
HUD. A head-pinned screen skips the wrist facing rule and shows whenever
the screens do. Carrying it re-pins it to the head on release, like a
wrist pin, so it can be adjusted in VR. The Visibility tab (now
Visibility & pins) sets each screen's pin: in the room, either wrist, or
your head, and the pin command now rejects anything but left, right, or
head (it used to take anything else as left). This removes the "no HUD"
limit from the docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SteamVR's combined gaze keeps going on one eye, but it holds the lost
eye's yaw, so the gaze moves half as far sideways as the eyes do.
ft-gaze now reads each eye's tracking uncertainty and raw measurement
from eye-server.mmap. When the tracker loses an eye, ft-gazed takes the
gaze from the other one, plus the offset that eye usually shows
against both, learned while both are seen. On a recording, one eye
alone came out a median 0.8 degrees from both eyes' gaze.
Glances down at the keyboard, past every screen, aren't sent. The
pointer stays put, and eyes lost there don't count as lost.
The gaze probe gets a Headset fit mode. It shows per-eye tracking,
openness and confidence, maps where each eye gets lost, gives hints,
and has a guided check. The settings app opens it from the Gaze page
and shows how often each eye is lost. The probe can also test each eye
alone, and its side panel now collapses to a title bar so the dot
isn't hidden behind it.
Snapping to UI elements is deferred; the mouse drag is the correction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
scripts/keys-report.py records what happens to the modifiers, Tab, and
Esc while someone reproduces a key problem: each press, release, and
autorepeat as the relay reads it from a physical keyboard, and as it
comes out of the relay's virtual keyboard to gamescope and SteamVR. It
adds the relay's view of every device (role, grabbed), which programs
have each input node open, and the relay, pointer helper, and desktop
logs for the same time. Other keys show only as "other key", so nothing
typed ends up in the report, and Bluetooth addresses are masked.
For #2: Shift+Tab in the Frametop desktop opened the SteamVR dashboard
and then stayed held, which doesn't happen here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With a screen's scale set to anything but 100%, clicks landed away from
the cursor, further off the further from the top left (#3). ft-screens
hands KWin panel positions in buffer pixels, and KWin's nested Wayland
backend (6.2.5, WaylandInputDevice) adds surface coordinates to its
output's logical position without dividing by the output's scale. At
125% a click at the middle of a 3440x1440 screen, (1720, 720), reached
KWin as logical (1720, 720), pixel (2150, 900).
ft-screens now keeps a scale per screen and divides pointer positions by
it. ft-layout sends each screen's scale, as KWin reports it after
applying, with a new "scale N s" command, whenever it applies scales:
at desktop start and from Frametop Display Settings. Screens default to
1, so an ft-layout that never sends it keeps the old behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A controller released the 3D mouse's pointer on a single pose sample
faster than 0.35 m/s or 2 rad/s, once the mouse had been still for
500 ms. The helper polls about every 8 ms, so one noisy sample was
enough: a knock on the desk, or a tracking jump when the headset's
cameras pick a resting controller up again (#1).
A controller now has to stay over the limit for 100 ms in a row, and
only samples with a normal tracking result (Running_OK) count. The new
POINTER_CONTROLLER_PICKUP setting (1 by default, 0.5 to 5) scales both
limits; it's a slider on the Pointer page of Frametop Input Settings
and applies live. A controller picked up for real still gets the laser
back through SteamVR's hand role, which follows its touch sensors. The
release log now records the speed and spin that triggered it, to tune
the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Most of SteamVR's Settings page took no clicks from the 3D mouse: they
went through to a desktop screen behind it, and the page covered the dot.
Steam's pages (Library and the rest) are drawn in
valve.steam.gamepadui.main, which ComputeOverlayIntersection hits exactly.
For SteamVR Settings that overlay is hidden and the page is drawn by the
dashboard's scene-graph panel, whose shape OpenVR doesn't give out. The
helper guessed a plane and a 0.5 m circle from the panel's transform, but
its origin is at the page's left edge and the page's surface is nearer
than that plane, so the laser, starting a few cm in front of the guess,
started behind the page.
On that page only (dashboard open, the main overlay hidden, the line of
sight crossing the page's measured area), the laser now starts 25 cm from
the eye so SteamVR's own hit test finds the page. The dot is drawn 0.6 m
out, in front of the page, and the laser-catching dot sits 8 m out,
invisible, with SteamVR's hit dot hidden on it. The beam and SteamVR's hit
dot show there, like a controller's; everywhere else nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SteamVR's "Enable global input from overlays (Experimental)" could only
be turned on from the settings app: its notice, with the button, hid once
the setting was on. It's now a switch, and the notice shows only when
buttons are mapped and the setting is off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Frame controllers aren't input devices on the host, so the pointer
helper reads them with SteamVR input (vrbuttons.h, actions/), one action
set per button, and sends presses to the relay, which does the mapped
action like for a mouse button. Only mapped buttons are taken, at an
overlay-global priority (SteamVR's experimental "Enable global input from
overlays"), and only outside games unless In games is on. Frametop Input
Settings gets a Controllers page to map them.
Gaze mode: a left press while the gaze has the pointer isn't sent at
once. The pointer stops, you drag it onto what you meant with the button
held, and the release clicks there; a press held still for
POINTER_GAZE_HOLD (0.5 s) becomes a real press, for drags. The dot shows
only while the mouse moves it (POINTER_GAZE_SHOW), while a press is held,
and as a pulse per click. Outside games the pointer stays on while gaze
mode is on. ft-gazed takes a third of each lesson's offset instead of all
of it: in the first live test one 6 degree lesson moved everything and put
the next target 7 degrees off. Frametop Input Settings gets a Gaze page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Live, the tracker had lost the left eye (openness 0, set 2's eyes 9 to 14
degrees apart) and ft-gazed dropped 96% of samples as blinks. A blink is now
both eyes closing, each judged against its own recent good readings, and the
service defaults to mmap set 1, SteamVR's combined gaze, which keeps going
with one eye. With set 2, one-eye samples are still dropped, since its
combined direction is off by half of what the lost eye reads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MAGIC pointing (Zhai et al. 1999), off by default: with POINTER_GAZE=1,
"gaze on", or a button mapped to the new gaze_toggle action, the cursor ray
is the corrected gaze from ft-gazed while the gaze has the pointer. Moving
the mouse takes the pointer from where the gaze left it; looking more than
POINTER_GAZE_RETAKE (5 deg) away with the mouse still gives it back. The
pointer is aimed at the gaze, never steered toward it, and only fresh gaze
moves it, so a stopped service or a blink leaves it where it is. A mouse
nudge of up to POINTER_GAZE_NUDGE_MAX (8 deg) before a click is sent to
ft-gazed as a lesson in the eye tracker's error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gazed runs ft-gaze, drops blinks and dropouts, smooths with a fixation
lock, applies the probe's calibration plus what the pointer has taught
since, and sends the corrected gaze to the pointer helper at 90 Hz. The
helper sends lessons back (a nudge before a click), which are learned and
saved. It only reads the eye tracker; nothing of SteamVR's is written.
gaze/run.sh installs it as a user service that starts with SteamVR;
ft-gazectl turns gaze mode on and off and shows the service's status.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The correction models, filters, blink filter, and SteamVR log reader move
out of the probe so the gaze service can use them too. Two additions on the
way: the log reader follows the headset going on and off (SteamVR starts its
eye model over each time it goes on), and LiveCorrection counts lessons from
before the last time it went on less (OLD_WEAR), so the first few after
relearn the offset while the shape is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both mmap sets now add "eyes": the left and right eye's head-relative
direction, so the eyes can be calibrated separately (each has its own offset
between where the tracker says it points and where it looks). Nothing uses
it yet; it gets logged with every sample.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gaze reads the Frame's eye tracker (SteamVR's eyetracking action and the
two gaze sets in eye-server.mmap, read only) and prints where the gaze lands
on the Frametop screens. ft-gazeprobe is a GTK playground on top of it: a
Vision Pro style calibration run, an accuracy test, refining the correction
model from logged points, and click, drag, and snap practice that learn the
tracker's error on the fly. It also follows SteamVR's eyetracking log for
restarts and the clicks SteamVR calibrates itself from, which it keeps only
in memory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
KWin's output positions now follow where the Frametop screens are in the room
instead of their numbers: a screen you see to the left of another is to its
left in Plasma, so the pointer and dragged windows cross straight to it.
Screens one above the other stack, and wrist-pinned screens go last.
ft-layout scale works this out from ft-screens' head pose and screen poses,
and runs after arranging, capturing, or pinning; ft-screens runs it half a
second after a screen is let go. With no head pose (headset off) KWin's
order is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It lists what can go wrong with the relay taking the volume keys (keymaps
left remapped after a crash, the headset's click button on the same
device, wpctl stepping the default output), with key releases (a key left
held in the desktop when its release never arrives), and with keyboards
grabbed for typing (hotkey tools lose them; SHARE_KEYS is off by default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It works but is only lightly tested, and what's left is mostly tuning its
settings. Frametop Input Settings now says so under the Head follow switch,
and the README, design notes, and button action name say it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Easing the reference toward the head all the time moved the cursor on
every small head movement, so a cursor parked in a corner of the view
drifted. Now nothing moves while the head stays within the leash. Once
the head has been past it for POINTER_LEASH_DELAY (0.2 s, so a glance
out and back doesn't count), the reference eases all the way to where
you face (POINTER_LEASH_RETURN) and the cursor lands back in its place
in the view, then the leash waits again. Leaning inside the leash no
longer moves the cursor either. Leash 0 stays head-locked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The leash only moved its reference when the head reached the leash's end,
so after turning back it sat up to the leash off, and recentring meant
overshooting with the head. The reference now eases toward the head's
facing (POINTER_LEASH_RETURN, 0.2 s) and never lags more than the leash,
so the cursor settles back to its place in the view once the head stops.
The mouse can now move the cursor up to POINTER_FOLLOW_REACH (70 degrees)
from the middle of the view, up from a fixed 40. Both are sliders on the
Pointer page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Off by default. With POINTER_FOLLOW=1 (a switch on the Pointer page of
Frametop Input Settings, or a mouse button mapped to Head follow on/off),
the cursor rides on a reference direction leashed POINTER_LEASH_DEG (10)
from where you face. Within the leash it stays put in the room; past it,
it turns with your head and keeps its offset. A leash of 0 locks it to
your view. Head roll is ignored, the cursor stays within 40 degrees of
the reference, and it holds still in the room while the left button is
down so the head can't nudge a click or a drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An ungrabbed keyboard reached both sides at once: gamescope, which in VR
reads every input device itself (the SteamOS build's InputStealer), typed
into its focused app, and ft-screens typed into the desktop. Space in the
desktop paused Spotify on the dashboard, including every space frame-voice
dictated. And while the SteamVR dashboard was open, the desktop got no
keys at all.
Typing now follows the last click. ft-screens sees clicks on its own
screens; the pointer helper reports the panel under the dot on each mouse
press, so a click on any other panel sends typing to Steam. While typing
goes to the desktop and the screens are showing, ft-screens tells the
relay every second, and the relay grabs pass-through keyboards. A grab
waits until no key is down, and the relay lets go if ft-screens stops
reporting. Controller clicks on other panels aren't visible to overlay
apps, so they don't move typing (noted in the README).
A program that reads every keyboard for a hotkey loses a grabbed one.
Repeating the keys on another input device doesn't work, since gamescope
reads that too, so with SHARE_KEYS=1 the relay sends them to
@frametop_keys as datagrams with the device name. It's off by default:
any local process that binds that name first would get every key typed
into the desktop.
The docs now say gamescope reads keyboards and the headset's buttons
itself; they said SteamVR passed keys on to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens dropped every key while the SteamVR dashboard was open or no
screen had focus, releases included. A modifier held as the dashboard
opened stayed down in the desktop, so later keys launched shortcuts
(T opened Konsole as Ctrl+Alt+T). The release of a key the desktop got
the press for now always goes through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
gamescope sends volume up and down to Steam by moving keyboard focus to
Steam for the key and back. When nothing had focus, it moves focus back to
null and wlroots aborts, which ends the whole VR session. One press of the
headset's volume button did that while working in the Frametop desktop.
The input relay now handles volume keys from every device that has them,
the headset's buttons included, and steps the default output with wpctl
(5%, repeating while held). SteamVR, which passes keys on to gamescope,
never sees a volume key: devices with a keymap (gpio-keys, USB and
Bluetooth keyboards) get only their volume entries remapped to unused
codes, so the headset's click button keeps working, and pmic_resin, which
has only volume down, is grabbed. The keymaps go back when the relay
stops, and --no-grab leaves the volume keys alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Meta tap on a pass-through keyboard toggled the SteamVR dashboard, which
got in the way of using Meta on its own. It's now off unless
META_DASHBOARD=1 is in ~/.config/frametop.conf. Meta as a modifier
(Meta+Shift+R, Meta+Shift+H) is unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens read a screen's pose back from SteamVR right after setting it
to place its controls. SteamVR could still return the old pose, so after
Arrange now (or a layout reset) the bar and buttons stayed where the screen
had been. ft-screens now keeps each screen's pose itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Re-running the installer replaced the ft_pointer driver's files under a
running SteamVR. SteamVR then kept giving the virtual controller its hand
role but ignored its laser claim, so the mouse moved its dot without
SteamVR's laser until SteamVR restarted. The driver is now staged and only
replaced when it changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hidden controls were taken out of SteamVR, so only ft-screens' own
proximity test could bring them back, and that test didn't match every
controller's laser. They now stay in place fully transparent while
hidden, and SteamVR's hover event on one reveals them, for any laser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
