saphid--frame-control/docs/devices.md

Headsets, addresses and the connection

Frame Control can manage more than one Steam Frame, and each headset can be reached at more than one address: a LAN IP at home, another at the office, its mDNS name (frame.local), its Tailscale IP or MagicDNS name. The Devices tab (key 5) lists them, and the connection pill in the header shows what the app is doing to reach the one in use, step by step, as it happens.

The code is in three modules, all stdlib-only Python on your computer:

Module	What it does
ui/frame_devices.py	The registry: headsets, their addresses, networks; importing and updating ~/.ssh/config; pinned host keys
ui/frame_network.py	Which network this computer is on, and Tailscale's state
ui/frame_link.py	The connector: finds the headset, keeps the SSH connection, publishes each stage; the Devices API

Headsets

Each headset keeps its own SSH alias, as Set Up Connection has always written it: the first is frame, the next frame-2, and so on. Terminal's ssh frame-2 and the helper scripts (FRAME_ALIAS=frame-2 scripts/push.sh …) work for each one.

• Nothing to migrate by hand. On first start, the app imports every # >>> steam-frame (ALIAS) >>> block in ~/.ssh/config as a headset, with the block's HostName as its first address. It also copies the host key your known_hosts already trusts for that address into the app's own ~/.ssh/frame-control_known_hosts, so nobody is asked to trust it again.
• Add a headset runs Set Up Connection (scripts/connect.sh on macOS, ui/frame_connect.py --alias NAME elsewhere) in a terminal with a new alias. When it writes its block, the app picks the headset up by itself. If Set Up Connection runs again and finds a headset somewhere new, that address is added at the top of its list.
• Use this headset (or the switcher in the header, or the app's Frame → Headset menu) moves the whole app to another headset; every panel reloads from it.
• Remove forgets a headset. Its ~/.ssh/config block stays unless you tick the box; either way it isn't imported again unless Set Up Connection changes it.
• A plain FRAME_ALIAS that Set Up Connection never configured still works: the app shows it as not set up and lets ssh's own config decide where it goes.

Addresses

Each address has a kind (LAN, mDNS, Tailscale or Other, guessed from the address and changeable), an optional label, the networks it has worked on, and when it last worked with its round-trip time.

When connecting, the app tries all addresses at once (TCP to the SSH port) and ranks them:

1. addresses that worked on the network this computer is on now;
2. mDNS names;
3. Tailscale addresses, if Tailscale is running here;
4. addresses not tried on this network yet;
5. addresses that only ever worked on other networks;
6. Tailscale addresses while Tailscale is off.

Your order on the Devices tab breaks ties. The best-ranked address that answers wins; one that answers first waits up to 0.35 s for a better-ranked one that is still trying. If SSH to the winner fails in a way another address could fix (a different device answered there, or the link dropped), the next one that answered is tried. Every success records the network on that address, so next time on that network it's tried first.

Test now probes every address and tries SSH on each one that answers, without disturbing the connection in use: "SSH works", "answered as a different headset", "refused this computer's key", or why it didn't answer. Find on Tailscale lists your tailnet's devices (likely headsets first, from tailscale status --json, including the Mac app's own CLI) with buttons to add their MagicDNS name or IP. Find on this network asks mDNS for SteamOS devkit services and checks ALIAS.local and frame.local.

Networks

A network is told apart by its default gateway: the router's IP address plus its hardware (MAC) address, read with route/arp (macOS), ip route/ip neigh (Linux) or route print/arp -a (Windows). That works on wired networks, and on macOS 14 and later, which hides the Wi-Fi name from apps without Location permission. Where the system does share the Wi-Fi name, it's shown, and you can name any network yourself ("Home Wi-Fi") on the Devices tab.

The app rereads the gateway every 5 seconds and Tailscale's state every 30 seconds. Changing networks reconnects.

The connection, stage by stage

The connector runs in the server (frame_link.Link) and moves through:

1. Checking this computer's network: gateway, Wi-Fi, this computer's IP, Tailscale.
2. Finding the headset: each address resolving, trying, answered in N ms, no answer, refused, or can't be found.
3. Opening SSH to the address that answered.
4. Checking the headset's identity: the host key must match the one pinned for this headset.
5. Logging in as the headset's user.
6. Connected via network N, address A, round trip T; or failed at a stage with the reason in plain words and a countdown to the next try (5, 10, 20, then every 30 seconds). Retry now skips the wait.

Stages 3 to 5 come from following ssh -v as it runs. On macOS and Linux the connection is an SSH ControlMaster that every command shares; when it dies (the headset slept or left the network) the connector notices and starts again. On Windows, where OpenSSH can't share a connection, the same handshake runs once and each command then connects on its own; a command that can't reach the headset makes the connector start again.

Once connected, every ssh, scp and rsync the app runs gets -o HostName=<address> -o HostKeyAlias=frame-control-<id> -o UserKnownHostsFile=~/.ssh/frame-control_known_hosts -o User=… -o Port=…. The alias's block in ~/.ssh/config is also updated to the last address that worked (and to the user and port you set), so Terminal's ssh frame and the scripts follow.

Host keys are pinned per headset, not per address. Your own known_hosts is keyed by address, so a different device answering at a remembered IP (a DHCP lease that moved) would look like a new host there. The app keys its own known_hosts by headset instead: a different device answering at one of its addresses is refused, and the pill says so. A headset's first connection trusts the key it shows, as Set Up Connection does. After reinstalling SteamOS the headset has a new key; Forget identity on the Devices tab lets the next connection save the new one.

API

All under the usual /api/ guards (loopback Host, X-Frame-UI header).

Request	Returns
GET /api/connection	The connection state: phase (connecting, connected, failed), device, network, stages, probes, via, error, retry_at, tests, version
GET /api/connection/events	The same as server-sent events, one each time it changes (the page reads it with fetch, since EventSource can't send the header)
GET /api/devices	Headsets, the current network, known networks, the next free alias
GET /api/devices/tailscale?id=	Tailscale peers, likely headsets first
GET /api/devices/mdns?id=	Headsets found on this network
POST /api/devices	{"action": ...}: use, update (name, user, port), remove, address-add, address-update, address-remove, address-move, test, forget-identity, name-network, setup (alias, optional host), retry

Every host, alias and user is checked against strict patterns before it's stored, because they end up in ssh arguments and ~/.ssh/config; nothing goes through a shell.

The registry file

devices.json in the app's data folder (~/Library/Application Support/Frame Control on macOS, %APPDATA%\Frame Control on Windows, ~/.local/share/frame-control on Linux). It's plain JSON so the iPhone app can share the format later (it still connects to one host; see iphone.md):

{"version": 1, "active": "f67f8b7e",
 "devices": [{"id": "f67f8b7e", "name": "Steam Frame", "alias": "frame", "user": "steamos", "port": 22,
              "identity_files": ["~/.ssh/id_ed25519_frame"],
              "addresses": [{"host": "frame.local", "kind": "mdns", "label": "",
                             "networks": ["n-e0998baa61"], "last_ok": 1790593550.4, "last_rtt_ms": 0.9}]}],
 "networks": {"n-e0998baa61": {"name": "Home Wi-Fi", "ssid": null, "gateway": "192.168.1.1",
                               "gateway_mac": "b4:fb:e4:b5:67:55", "wifi": true, "last_seen": 1790593550.0}}}

A network id is n- and the first 10 hex digits of SHA-1 of gateway|mac.

Tests

tests/test_devices.py, tests/test_network.py and tests/test_link.py run with the other unit tests. They use a stand-in ssh (tests/fakessh/ssh) that prints what ssh -v prints and plays a ControlMaster, real sockets on this computer for the addresses, and temporary folders for ~/.ssh (FRAME_CONTROL_SSH_DIR) and the app data (FRAME_CONTROL_DATA_DIR), so they never touch yours.