# Headsets, addresses and the connection

Frame Control can manage more than one Steam Frame, and each headset can be
reached at more than one address: a LAN IP at home, another at the office, its
mDNS name (`frame.local`), its Tailscale IP or MagicDNS name. The **Devices**
tab (key 5) lists them, and the connection pill in the header shows what the
app is doing to reach the one in use, step by step, as it happens.

The code is in three modules, all stdlib-only Python on your computer:

| Module | What it does |
|---|---|
| `ui/frame_devices.py` | The registry: headsets, their addresses, networks; importing and updating `~/.ssh/config`; pinned host keys |
| `ui/frame_network.py` | Which network this computer is on, and Tailscale's state |
| `ui/frame_link.py` | The connector: finds the headset, keeps the SSH connection, publishes each stage; the Devices API |

## Headsets

Each headset keeps its own SSH alias, as Set Up Connection has always written
it: the first is `frame`, the next `frame-2`, and so on. Terminal's
`ssh frame-2` and the helper scripts (`FRAME_ALIAS=frame-2 scripts/push.sh …`)
work for each one.

- **Nothing to migrate by hand.** On first start, the app imports every
  `# >>> steam-frame (ALIAS) >>>` block in `~/.ssh/config` as a headset, with
  the block's HostName as its first address. It also copies the host key your
  `known_hosts` already trusts for that address into the app's own
  `~/.ssh/frame-control_known_hosts`, so nobody is asked to trust it again.
- **Add a headset** runs Set Up Connection (`scripts/connect.sh` on macOS,
  `ui/frame_connect.py --alias NAME` elsewhere) in a terminal with a new alias.
  When it writes its block, the app picks the headset up by itself. If Set Up
  Connection runs again and finds a headset somewhere new, that address is added
  at the top of its list.
- **Use this headset** (or the switcher in the header, or the app's
  **Frame → Headset** menu) moves the whole app to another headset; every panel
  reloads from it.
- **Remove** forgets a headset. Its `~/.ssh/config` block stays unless you tick
  the box; either way it isn't imported again unless Set Up Connection changes it.
- A plain `FRAME_ALIAS` that Set Up Connection never configured still works: the
  app shows it as not set up and lets ssh's own config decide where it goes.

## Addresses

Each address has a kind (LAN, mDNS, Tailscale or Other, guessed from the address
and changeable), an optional label, the networks it has worked on, and when it
last worked with its round-trip time.

When connecting, the app **tries all addresses at once** (TCP to the SSH port)
and ranks them:

1. addresses that worked on the network this computer is on now;
2. mDNS names;
3. Tailscale addresses, if Tailscale is running here;
4. addresses not tried on this network yet;
5. addresses that only ever worked on other networks;
6. Tailscale addresses while Tailscale is off.

Your order on the Devices tab breaks ties. The best-ranked address that answers
wins; one that answers first waits up to 0.35 s for a better-ranked one that is
still trying. If SSH to the winner fails in a way another address could fix
(a different device answered there, or the link dropped), the next one that
answered is tried. Every success records the network on that address, so next
time on that network it's tried first.

**Test now** probes every address and tries SSH on each one that answers, without
disturbing the connection in use: "SSH works", "answered as a different
headset", "refused this computer's key", or why it didn't answer. **Find on
Tailscale** lists your tailnet's devices (likely headsets first, from `tailscale
status --json`, including the Mac app's own CLI) with buttons to add their
MagicDNS name or IP. **Find on this network** asks mDNS for SteamOS devkit
services and checks `ALIAS.local` and `frame.local`.

## Networks

A network is told apart by its default gateway: the router's IP address plus its
hardware (MAC) address, read with `route`/`arp` (macOS), `ip route`/`ip neigh`
(Linux) or `route print`/`arp -a` (Windows). That works on wired networks, and
on macOS 14 and later, which hides the Wi-Fi name from apps without Location
permission. Where the system does share the Wi-Fi name, it's shown, and you can
name any network yourself ("Home Wi-Fi") on the Devices tab.

The app rereads the gateway every 5 seconds and Tailscale's state every
30 seconds. Changing networks reconnects.

## The connection, stage by stage

The connector runs in the server (`frame_link.Link`) and moves through:

1. **Checking this computer's network**: gateway, Wi-Fi, this computer's IP, Tailscale.
2. **Finding the headset**: each address resolving, trying, answered in N ms,
   no answer, refused, or can't be found.
3. **Opening SSH** to the address that answered.
4. **Checking the headset's identity**: the host key must match the one pinned
   for this headset.
5. **Logging in** as the headset's user.
6. **Connected** via network N, address A, round trip T; or **failed** at a stage
   with the reason in plain words and a countdown to the next try (5, 10, 20,
   then every 30 seconds). Retry now skips the wait.

Stages 3 to 5 come from following `ssh -v` as it runs. On macOS and Linux the
connection is an SSH ControlMaster that every command shares; when it dies (the
headset slept or left the network) the connector notices and starts again. On
Windows, where OpenSSH can't share a connection, the same handshake runs once
and each command then connects on its own; a command that can't reach the
headset makes the connector start again.

Once connected, every `ssh`, `scp` and `rsync` the app runs gets
`-o HostName=<address> -o HostKeyAlias=frame-control-<id>
-o UserKnownHostsFile=~/.ssh/frame-control_known_hosts -o User=… -o Port=…`. The
alias's block in `~/.ssh/config` is also updated to the last address that
worked (and to the user and port you set), so Terminal's `ssh frame` and the
scripts follow.

**Host keys are pinned per headset, not per address.** Your own `known_hosts`
is keyed by address, so a different device answering at a remembered IP (a DHCP
lease that moved) would look like a new host there. The app keys its own
known_hosts by headset instead: a different device answering at one of its
addresses is refused, and the pill says so. A headset's first connection trusts
the key it shows, as Set Up Connection does. After reinstalling SteamOS the
headset has a new key; **Forget identity** on the Devices tab lets the next
connection save the new one.

## API

All under the usual `/api/` guards (loopback `Host`, `X-Frame-UI` header).

| Request | Returns |
|---|---|
| `GET /api/connection` | The connection state: `phase` (connecting, connected, failed), `device`, `network`, `stages`, `probes`, `via`, `error`, `retry_at`, `tests`, `version` |
| `GET /api/connection/events` | The same as server-sent events, one each time it changes (the page reads it with `fetch`, since `EventSource` can't send the header) |
| `GET /api/devices` | Headsets, the current network, known networks, the next free alias |
| `GET /api/devices/tailscale?id=` | Tailscale peers, likely headsets first |
| `GET /api/devices/mdns?id=` | Headsets found on this network |
| `POST /api/devices` | `{"action": ...}`: `use`, `update` (name, user, port), `remove`, `address-add`, `address-update`, `address-remove`, `address-move`, `test`, `forget-identity`, `name-network`, `setup` (alias, optional host), `retry` |

Every host, alias and user is checked against strict patterns before it's
stored, because they end up in ssh arguments and `~/.ssh/config`; nothing goes
through a shell.

## The registry file

`devices.json` in the app's data folder (`~/Library/Application Support/Frame
Control` on macOS, `%APPDATA%\Frame Control` on Windows,
`~/.local/share/frame-control` on Linux). It's plain JSON so the iPhone app can
share the format later (it still connects to one host; see
[iphone.md](iphone.md)):

```json
{"version": 1, "active": "f67f8b7e",
 "devices": [{"id": "f67f8b7e", "name": "Steam Frame", "alias": "frame", "user": "steamos", "port": 22,
              "identity_files": ["~/.ssh/id_ed25519_frame"],
              "addresses": [{"host": "frame.local", "kind": "mdns", "label": "",
                             "networks": ["n-e0998baa61"], "last_ok": 1790593550.4, "last_rtt_ms": 0.9}]}],
 "networks": {"n-e0998baa61": {"name": "Home Wi-Fi", "ssid": null, "gateway": "192.168.1.1",
                               "gateway_mac": "b4:fb:e4:b5:67:55", "wifi": true, "last_seen": 1790593550.0}}}
```

A network id is `n-` and the first 10 hex digits of SHA-1 of `gateway|mac`.

## Tests

`tests/test_devices.py`, `tests/test_network.py` and `tests/test_link.py` run
with the other unit tests. They use a stand-in `ssh` (`tests/fakessh/ssh`) that
prints what `ssh -v` prints and plays a ControlMaster, real sockets on this
computer for the addresses, and temporary folders for `~/.ssh`
(`FRAME_CONTROL_SSH_DIR`) and the app data (`FRAME_CONTROL_DATA_DIR`), so they
never touch yours.