The in-game settings bar rewrote Config.toml in place with a truncating
open, so a crash or a full SD card mid-save could leave it empty or cut
short. Settings are now written beside the file and renamed over it, and
a file that exists but can't be read is no longer rewritten from nothing.
Ported from BlackAndBlue95/Strikers-WiiCompiled 435daf3e (the
runtime_config.h part only).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018NKSMYZU43wUfYtm1sxGsC
[vr] adaptive_resolution (off by default, in the VR tab) lowers the
race's eye resolution by 10% steps, down to 70%, while new eye frames
fall below 85% of the game's 60 FPS, and raises it again after three
seconds on time. Adapted from heurazy/Wiicompiled_VR-PLUS.
The eyes render into the top-left corner of the full swapchain image
and the projection layer shows only that corner, so the compositor
upscales them and no swapchain is recreated, unlike render_scale. The
Linux same-device bridge now copies an eye smaller than its target;
the Quest's bridge and layer already did. The PC's D3D12 path copies
whole eyes, so the setting is not offered on Windows.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Sabhzu6VgoWcHtpSk4C9KZ
SteamVR on the Steam Frame ran the game at half the 120 Hz display rate,
since render-first pacing submits only when a game frame is sealed, and
filled every other refresh itself even with Motion Smoothing off, which
doubled the HUD and the menu screen while the head turned. With the new
[vr] repeat_frames (default on for the Frame, off elsewhere, live), the
pacing thread waits a millisecond for the eyes and otherwise spends the
refresh on a keep-alive cycle that resubmits the retained layer with its
rendered poses, paced by xrWaitFrame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019HBRGKTE1GnN2ah8gcZKr3
MKW_VR_STANDALONE (runtime_config.h) names the standalone headsets: the
Quest, and the Steam Frame in its Android flavour and its native SteamOS
build. They share render scale 0.8, foveation medium, the GX thread,
the game's object culling, and the headset panel's foveation and
tracked-hands rows; passthrough stays Quest-only.
The Frame's native build also sets AuroraConfig::xrHeadsetOnly, so
Aurora neither presents the desktop window nobody watches nor renders
it past the last pass the eyes sample, which Android does always (4 to
6 ms of a 12 ms GPU frame on a Quest 3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019HBRGKTE1GnN2ah8gcZKr3
With [vr] eye_tracked_foveation (on by default on the Steam Frame, off
elsewhere) the runtime asks for XR_EXT_eye_gaze_interaction. When the
system reports an eye tracker, OpenXRInput binds the gaze pose and
locates it for each packet's display time, in the space the eye views
are located in; vr/eye_gaze.h turns it into tangents of each eye's own
view, which AuroraStereoFrame now carries (appended, after the existing
prefix).
Aurora centres the eye's fragment density map on the gaze snapped to a
cell of two map texels (about 3 degrees). Each eye keeps up to 32 maps,
one per cell looked at, so a glance back reuses its map; a new map is
bound once its upload completes, and until then the eye keeps the map
it had. Without a tracked gaze (a blink, no tracker, the setting off)
foveation centres on the forward direction exactly as before: the
forward maps are byte-identical.
Also logs every extension the OpenXR runtime offers at startup, so the
first Steam Frame session shows what SteamVR's Android runtime has.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019HBRGKTE1GnN2ah8gcZKr3
SteamVR has no XR_FB_passthrough, so the Steam Frame build neither asks
for it nor offers the setting: [vr] passthrough defaults to false there,
and the F10/headset panel and the launcher hide the switch. The Frame
keeps the Android defaults that suit it (render scale 0.8, foveation
medium, the GX thread, object culling, performance level boost) and
starts at 120 Hz (previous commit).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019HBRGKTE1GnN2ah8gcZKr3
[vr] refresh_rate (Hz, 0 = the headset's own) is requested through
XR_FB_display_refresh_rate each time the session starts running and
whenever the setting changes, matched against the runtime's own list
within half a hertz. Setting it back to 0 restores the rate the session
started at. A rate that is not offered, or one the runtime declines, is
logged and changes nothing.
The game renders 60 frames a second, so at 120 Hz every frame shows for
exactly two refreshes, where 72 or 90 Hz hold some frames longer than
others. The Steam Frame build defaults to 120; every other build keeps
the headset's own rate unless the player picks one.
The F10/headset panel and the Android launcher's Headset section offer
the choice; the interpolation tooltip points at it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019HBRGKTE1GnN2ah8gcZKr3
- Introduced `vrCockpitItemThrow` configuration option to enable throwing items in VR.
- Implemented `ThrowDetector` and `ThrowSequence` classes to manage item throwing mechanics based on hand movements.
- Updated `OpenXRInput` to handle item throwing based on hand swings, integrating with existing VR input systems.
- Enhanced settings overlay to allow users to toggle item throwing functionality.
- Added tests for item throwing mechanics, ensuring correct behavior for various hand movements and conditions.
- Implemented DVDReadVrAsset function to read mapped disc paths for VR assets.
- Created HeldItem structure and ReadHeldItem function for managing held items in the game.
- Developed unit tests for ReadHeldItem to ensure correct functionality and edge case handling.
- Added cockpit item data tests to validate model indexing and parsing of archives.
- Introduced a new configuration option for object culling in VR, allowing the game to hide objects outside the camera's view.
- Implemented native replacements for the Mario Kart functions responsible for scene culling, ensuring accurate behavior in VR.
- Added a new header file `mkw_vr_culling.h` to define the culling logic and structures.
- Created `mkw_vr_culling.cpp` to implement the culling logic, including frustum intersection checks and screen info updates.
- Updated runtime configuration to include the new object culling option, with appropriate getters and setters.
- Enhanced the settings overlay to allow users to toggle object culling in VR.
- Added tests in `vr_culling_tests.cpp` to validate the frustum intersection logic and ensure compliance with original behavior.
- Updated CMake files to include new source files and tests.
- Added SetRenderScale method to both D3D12 and Vulkan backends to adjust the render scale dynamically.
- Updated eye size calculations to reflect the new render scale in both backends.
- Implemented ResizeWritablePair method to handle resizing of swapchains based on the requested eye sizes.
- Modified BeginFrame methods to ensure swapchains are resized appropriately before rendering.
- Enhanced error handling to maintain current eye sizes when the requested sizes cannot be allocated.
- Added tests to validate render scale functionality, ensuring correct behavior when scaling up and down, including handling of refused sizes.
- New [vr] hand_tracking (default off, Quest only for now): the Quest launcher's Settings > VR and
the headset panel's VR tab, under hand steering. Two XR_EXT_hand_tracking trackers are located
every XR frame: with the controllers held the Quest builds the joints from their touch sensors
(XR_EXT_hand_tracking_data_source's controller source), once they are put down from its
cameras. The trackers exist only while the option and hand steering are on and also serve the
runtime hand mesh; the extensions (plus XR_FB_hand_tracking_aim) are asked for when either is
on at launch.
- Aurora skins the runtime mesh with the joints themselves (tracked pose times inverse bind pose,
no curl, no grip); runtimes with joints but no mesh get a skeleton; non-finite joints put only
that hand back on its grip curl. AuroraCockpitHand carries the 26 seated-frame joints and radii.
- The manifest declares horizonos.permission.HAND_TRACKING (and the deprecated
com.oculus.permission.HAND_TRACKING), both normal permissions with no prompt on a Quest 3, and
oculus.software.handtracking as optional; without it Horizon OS keeps the app controllers-only.
Bare hands then drive khr/simple_controller, so on Android a hand whose squeeze action is
inactive and select active is treated as bare: with the option off it presses nothing but the
menu gesture, is not drawn and feeds no Wii Remote motion.
- Interaction-profile changes and tracker sources are logged. The pure rules (grasp from finger
flexion, bare latch, pinch gate, bare-hand buttons, flick) live in the OpenXR-free
vr/openxr_hand_tracking.h with mkw_vr_hand_tracking_tests; the driving and flick parts are
wired in the next commits. Docs: OPENXR.md, docs/quest-port.md, README.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Introduced a new configuration option for immersive window mode in runtime_config.h.
- Updated the parsing and setting functions to handle the immersive window state.
- Modified the OpenXR backend to support rendering with the immersive window, blending the race view with the surrounding environment.
- Enhanced the settings overlay to allow users to select between immersive, immersive window, and flat screen race views.
- Implemented GPU rendering logic for the immersive window mask, ensuring correct visual output in various rendering paths.
- Added tests to validate the immersive window functionality and its interaction with existing race view settings.
- Eyes render under a VK_EXT_fragment_density_map: full rate around each eye's forward direction,
2x2 then 4x4 pixel blocks towards the edges ([vr] foveation = off|low|medium|high, default off).
XR_FB_foveation cannot help here: the runtime's maps only shape passes drawing into its
swapchain, and the eyes reach it through a copy.
- aurora-main/patches/dawn/aurora_fdm.inc: Dawn enables the extension only on request and for
dynamic rendering, flags every render pipeline, and chains an immutable RG8 map into any pass
whose first color attachment is a view bound to one (ABI: include/aurora/dawn_fdm_abi.h).
- android/Build-QuestDawn.ps1 builds the pinned Dawn revision with those patches for arm64
(dawn-build CI flags, protobuf off) into a cached package; Build-Quest.ps1 links it
(-StockDawn opts out) and AuroraDawnProvider.cmake enables the ABI from its manifest.
- lib/gfx/foveation.hpp generates the maps (32 px per texel, densities 255/127/63); an eye is
foveated only when single_pass_eyes draws it in one render pass. Menus never are.
- Live level from the headset panel's VR tab and the launcher; the launch decides whether the
device has maps. debug.wiicompiled.foveation and debug.wiicompiled.fdm for A/B.
- Tests: Foveation cases in gx_fifo_tests, mkw_vr_config_tests. Docs: OPENXR.md, quest-port.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Added eye_pass_plan.hpp: an eye keeps drawing in the render pass it has open across the frame's
GX copies (only the mono render performs them), skips passes a later clear of the whole color and
depth erases, and splits only for a clear of color alone or depth alone.
- render_stereo_eye follows that plan; the cockpit fallback is drawn inside the last pass instead of
a render pass of its own that loaded the eye back.
- The stencil is now cleared where the eye actually starts, so a cockpit mask drawn in an erased pass
can no longer punch holes in the HUD.
- [vr] single_pass_eyes (default on, live from F10) and debug.wiicompiled.eye_passes 0/1 on the Quest
switch back to one render pass per recorded pass for A/B timing.
- Each new plan shape is logged once ("Eye replay plan: ...").
- Tests: EyePassPlan cases in gx_fifo_tests; stereo_multiplayer_smoke and stereo_frame_worker_smoke
pass on D3D12.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
First person already seats you in the cockpit, so hand steering belongs with it:
the stick keeps steering until a grip actually takes hold of the wheel, and
nothing else changes until it does. "yaw_pitch" becomes the default anchor for
the same reason - from the driver's seat the vehicle's own climb reads as the
ground rising, where a level horizon reads as the kart sinking away.
Both defaults move together in runtime_config.h, the fresh-config template, the
F10 menu's reset, and both launchers, which mirror the runtime's constants. The
menu's reset also puts the rotation combo back on the default rather than on
"yaw", and now covers hand steering with the other cockpit keys.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Clicking the right thumbstick flips first person exactly as the F10
checkbox does, and saves it the same way. It works on the VR controllers
in either presentation (with a short tick on the right controller) and on
any other gamepad while VR is running. It never reached the game: SDL's
stick click only lands in Aurora's extended buttons.
A click counts on release, and only if the left thumbstick stayed up and
the headset settings panel stayed closed throughout, so the two-thumbstick
panel chord in gamepad mode never toggles the camera. A gamepad whose
right stick click is bound to a GameCube control on its port, as a button
or in an input expression, keeps it for the game. The XR side only posts
a request; the toggle itself runs on the game thread with the checkbox.
[vr] first_person_toggle_click (default true) and a checkbox under the
camera toggle turn the click off. mkw_vr_camera_toggle_tests covers the
click rule.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The pure pieces of the first-person cockpit and hand steering, ported from
heurazy's mario-kart-wii-VR-port: the SteeringWheel grab/turn model, the
native wheel vertex rotation, the level seat stabiliser, the seated-eye and
wheel/handlebar geometry, and the XR_FB_hand_tracking_mesh loader. Adds
openxr_driving.h, the OpenXR-free snapshot the pacing thread will publish for
the guest thread, with the hand-off rule (a held wheel replaces the left
stick's X and releases that hand's grip for the game) and the wheel's
displayed angle.
New [vr] keys: first_person_seat (cockpit), cockpit_units_per_meter (100),
steering_wheel (true), native_steering_wheel (true), hand_steering (false)
and the seven wheel_* tuning keys. Nothing reads them yet.
The fresh-config template now writes the first-person defaults the
constants hold (50 / 1.5 / 0); d86dcb0 updated the constants but not the
template.
Tests: mkw_steering_wheel_tests (the fork's), mkw_vr_cockpit_tests,
mkw_vr_hand_steering_tests.
- Introduced a new GX thread to handle the rendering pipeline, allowing the game thread to post commands without blocking.
- Added `gx_thread.h` and `gx_thread.cpp` to manage the command ring buffer and thread synchronization.
- Updated `vi.cpp` to utilize the GX thread for rendering tasks, improving frame pacing and responsiveness.
- Modified `main.cpp` to configure and start the GX thread, ensuring it integrates with the existing rendering workflow.
- Enhanced `openxr_integration.cpp` to register the GX thread with OpenXR for better performance in VR scenarios.
- Refactored `settings_overlay.cpp` to remove unnecessary waits for the frame worker, as the overlay now draws directly into the game thread's ImGui frame.
- Improved error handling and logging in the GX thread to capture exceptions during command execution.
Brings in the keyboard/mouse rebinding overhaul (#162), the Kamek
skip-return hook fixes (#182, #218), the exit button and controller LED
fix (#221), the autohide-cursor and mute hotkey fix (#211), the Linux
--sysroot plumbing (#224) and the switch to the theofficialgman
dawn-build fork (#215).
Conflicts resolved to keep the VR integration intact:
- settings_overlay.cpp/.h: kept both new declarations. The controller
rebinding UI takes upstream's click-to-rebind widgets wholesale - our
only edit there was wrapping the combo width in Scaled(), and
upstream's bindingWidth is already font-relative, so the headset
panel still scales. Kept our DrawResolutionMenu() extraction (the VR
panel reuses it) while adopting upstream's DrawExitPrompt() and its
new DrawTopBar() prologue; kept our Diagnostics menu alongside
upstream's exit-button width math. HandleEvents merges both keyboard
paths, with the VR recenter hotkey now guarded by !g_rebind.active so
it cannot fire while a binding is being captured.
- AuroraDawnProvider.cmake: dropped our now-dead Android hash block.
Upstream restructured the pins into an if/elseif chain that already
covers android/aarch64, with the digest for the new dawn-build fork;
our leftover block was unreachable and carried the old encounter
digest.
- Version plumbing (Build-Installer.ps1, Setup.Windows Program.cs and
csproj): kept this fork's own line, which is 0.2.39 and centralised in
Launcher/Directory.Build.props, rather than regressing to upstream's
hardcoded 0.2.32.
Verified: translator 654/654; runtime ctest 14/14 including every VR
test; WiiCompiled and RetroRewind link; aurora gx_fifo_tests 262/263,
the one failure being the TevRegisterLiveness case already documented as
pre-existing on this branch.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Brings in 25 upstream commits: Dolphin-compatible input expressions and
GCPadNew.ini import, NAND setting.txt console identity, empty-MKW-save
handling, rumble toggle, LLVM 22, and CI caching.
The only conflict was runtime/CMakeLists.txt, where both sides appended
test targets after mkw_platform_paths_tests. Both blocks are kept: the VR
first-person test alongside upstream's NAND save/settings, SC serial, and
input expression tests.
runtime_config.h and settings_overlay.cpp auto-merged; the VR settings
menu, recenter hotkey, and stereo/first-person init calls are intact
alongside upstream's InputBindings wiring.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Add Dolphin-compatible input expressions and GCPadNew.ini import
Rebased onto current main; addresses both CodeRabbit reviews on #89.
- Expression engine matching Dolphin's semantics: doubles rather than
booleans, 0.5 press threshold, & as min, | as max, and the functions if,
min, max, clamp, abs, sqrt, pow, sin, cos, tan, deadzone, timer, toggle,
hold, tap, pulse and smooth. Timing uses a steady clock in seconds, as
Dolphin does, so a copied expression behaves identically.
- Expressions bind to the GameCube buttons and triggers, combined with the
existing button mapping rather than replacing it, and are skipped while
the settings overlay holds input.
- Import reads [GCPadN] from the Dolphin config directory or from
GCPadNew.ini beside the executable. Stick axes are not expression driven
and keep their normal mapping.
- Fixes#74: a digital button bound to L or R now reports a fully pulled
analog trigger, plus a PlayStation preset and a vibration toggle.
Review fixes: config paths round-trip through RuntimeConfigFile::PathToUtf8
and PathFromUtf8 so non-ASCII paths open correctly on Windows, and the
duplicated exists branch is gone; the tap count is clamped before the
unsigned conversion; the expression editor uses resizable storage via
ImGuiInputTextFlags_CallbackResize so a long expression cannot be saved
truncated; clamp bounds are ordered before std::clamp; <cstdlib> is included
for std::strtod; non-finite values are rejected at the evaluator boundary as
well as at the deadzone and timer divisions; and InputBindings::Reload() runs
from InitializeRuntimeSettings rather than the vibration handler.
runtime/tests/test_expr.cpp covers operator precedence, each stateful
function and every case raised in review.
Third review round: smooth() guards NaN as well as infinity so a zero rate
cannot latch a non-finite value in node state; division evaluates both operands
so stateful functions in the left subtree still update when the divisor is zero;
the expression editor clears stale errors when the port changes; and
runtime/tests/test_expr.cpp is registered with CTest as mkw_input_expr_tests,
following the existing test targets.
* Update runtime/src/input_expr.cpp
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Update runtime/src/input_expr.cpp
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Update runtime/src/input_expr.cpp
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
---------
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
Claude