Update the status page screenshot for 0.6.0

Receive files with Taildrop; install signed updates from the status page
Taildrop: files sent to the console from the user's other devices are moved from Tailscale's holding area to /data/tailscale/received (a setting), announced on screen and listed on the status page with download links. Updates: the status page can install a newer release when asked to. A release carries tailscale.elf.sig, an Ed25519 signature over its version and SHA-256; the daemon installs only what verifies against the public key built into it, is the version the release claims and is newer than itself. The payload is handed to the ELF loader, and the copy named by the new payloadPath setting is replaced as well. - tsd/relsig, tsd/cmd/signrelease: signing, verifying, and keeping the key (keygen, passphrase-protected backup and restore). - tools/make-release.ps1 builds, signs and checksums a release. - Files are no longer copied to sockets with sendfile, which the PS5 kernel refuses.
2026-10-06 15:00:19 +02:00 · 2026-10-05 09:15:21 -04:00 · 2026-10-05 08:52:31 -04:00 · 2026-10-05 08:31:24 -04:00 · 2026-10-04 19:37:21 -04:00 · 2026-10-04 10:40:23 -04:00
34 changed files with 2603 additions and 59 deletions
@@ -31,7 +31,15 @@ VPN here. It runs inside one process:
  directly. They can through a *local forward* (see
  [game streaming](#game-streaming-moonlight-to-sunshine) and
  [configuration](#configuration)).
- No exit node, subnet routing, Tailscale SSH, Taildrop or Funnel.
+- No subnet routing, Tailscale SSH or Funnel. Taildrop works for receiving
+  files, not for sending them.
+- The console cannot use an exit node, and it does not offer itself as one.
+  Offering one is doable (it needs no tunnel device), but the PS5 would make
+  a terrible exit node: every packet would pass through this one low-priority
+  process, so it would be slow, and it would fall away whenever the console
+  goes into rest mode, reboots or loses its jailbreak, taking the internet of
+  every device using it with it. Use a PC, a server or a router on your
+  tailnet instead.

 ## Requirements

@@ -117,20 +125,50 @@ Notes:
  sleeps, so it is not on the tailnet then. Tailscale carries on by itself
  once the console is awake again.

+### Sending files to the console (Taildrop)
+
+Send a file to the console from any of your own devices with Tailscale's
+Taildrop: the share menu on a phone, `Send with Tailscale` on a desktop, or
+`tailscale file cp <file> <console name>:`. The file lands in
+`/data/tailscale/received` on the console (changeable in the settings), a
+notification says so, and the status page lists it under **Received files**
+with a download link. A file with the same name as an earlier one gets a
+number; nothing is overwritten.
+
+Taildrop only works between devices logged in as the same user; that is
+Tailscale's rule. Sending files from the console is not implemented.
+
 ### The status page

 `http://<console address>:8090`, on the LAN or over the tailnet, or the
 **Tailscale** icon on the home screen. It shows the connection state, the
 login link and your devices, and has the game streaming hosts, the settings,
-and buttons for logging out, stopping and uninstalling. It also says when a
-newer release is available.
+and buttons for logging out, stopping and uninstalling.
+
+**Updates.** When a newer release exists the page says so, and the console
+shows a notification once. **Install** downloads the release, checks that it
+is signed with this project's release key and is the version it claims to be,
+and starts it; the login and settings are kept. Nothing is ever installed
+without that button being pressed. It needs an ELF loader on port 9021, like
+sending the payload by hand does. If you keep `tailscale.elf` in a payload
+manager or autoloader so that it starts with the console, put that file's
+path under **Payload file to keep up to date** in the settings, for example
+`/data/pldmgr/payloads/Tailscale/tailscale.elf`; the update then replaces
+that copy as well. Otherwise the old version is back after the next restart.

 **Devices.** The list is grouped into your tailnet's devices and devices
 shared with you, and marks the ones that can be used as an exit node. It can
 be searched (name, address, OS, tag, place) and limited to devices that are
 online. If your tailnet has a VPN add-on such as Mullvad, its exit servers
 are counted but kept out of the list until you tick **Show VPN exit
-servers**.
+servers**. Click an address to copy it.
+
+**Key expiry.** The page shows when the console's Tailscale key expires. By
+default that is 180 days after logging in, and an expired key takes the
+console off your tailnet until someone presses **Log in again**. From two
+weeks before, the page and a notification on the console warn about it. To
+avoid it altogether, open the Tailscale admin console, find the console in
+the list of machines and choose **Disable key expiry**.

 **Password.** Out of the box the page has no password, like the console's
 other homebrew services: anyone on your LAN, or on your tailnet if your ACLs
@@ -138,9 +176,10 @@ allow it, can use it. Set one under **Settings**. It is then asked for on
 every device except the console itself. If you forget it, delete the
 `passwordHash` line from `/data/tailscale/config.json`.

-**Settings.** The name on the tailnet, the password, which UDP ports are
-reachable and which TCP ports are not, extra forwards, the HTTP proxy, the
-priority, and update checks. Most take effect when saved; the page says which
+**Settings.** The name on the tailnet, the password, who on the tailnet may
+connect, which UDP ports are reachable and which TCP ports are not, extra
+forwards, the HTTP proxy, the folder for received files, the payload file to
+keep up to date, the priority, and update checks. Most take effect when saved; the page says which
 ones need Tailscale to be started again.

 ### Game streaming (Moonlight to Sunshine)
@@ -222,6 +261,9 @@ optional.
  ],
  "udpPorts": [9295, 9296, 9297, 9302],
  "blockedPorts": [],
+  "allowFrom": "",
+  "receiveDir": "/data/tailscale/received",
+  "payloadPath": "",
  "priority": "",
  "checkUpdates": true,
  "verbose": false
@@ -240,8 +282,11 @@ optional.
 | `forwards` | Extra local forwards: `proto` is `tcp` or `udp`, `listen` a localhost address, `target` a tailnet host and port. |
 | `udpPorts` | The console's UDP ports reachable from the tailnet. Default `[9295, 9296, 9297, 9302]` (Remote Play). `[]` turns inbound UDP off. |
 | `blockedPorts` | Local TCP ports that are never exposed to the tailnet. |
+| `allowFrom` | `"own"` lets only devices logged in as the same user as the console connect; other users' devices and devices shared into the tailnet are turned away. Anything else is the default: every device your tailnet's access rules allow. If the console is tagged, `"own"` means the devices of its own tailnet. |
+| `receiveDir` | Where files sent to the console with Taildrop are put. |
+| `payloadPath` | The copy of `tailscale.elf` that is started with the console, if there is one. An update installed from the status page replaces it. Empty: none. |
 | `priority` | `"high"` lets the daemon compete with games for CPU time; anything else is the default, low. Applied when Tailscale starts. |
-| `checkUpdates` | Ask GitHub twice a day whether a newer release exists, to show it on the status page. Nothing is downloaded. |
+| `checkUpdates` | Ask GitHub twice a day whether a newer release exists, to show it on the status page and announce it once on the console. Nothing is downloaded. |
 | `verbose` | Put Tailscale's own log in the main log as well. |

 Files on the console:
@@ -252,6 +297,8 @@ Files on the console:
 | `/data/tailscale/state/` | Tailscale's state, including the login. |
 | `/data/tailscale/tailscale.log` | The daemon's log, rotated at 2 MB. |
 | `/data/tailscale/tailscale-debug.log` | Tailscale's detailed log, up to 4 MB plus one older file. |
+| `/data/tailscale/received/` | Files received with Taildrop. |
+| `/data/tailscale/launcher.log` | What the payload did before Tailscale itself started. The place to look when nothing seems to happen. |
 | `/data/tailscale/icon-installed` | Marks that the home screen icon was added. Delete it to have the icon added again on the next start. |
 | `/data/tailscale/icon-helper.elf` | The small payload that adds and removes the icon. |
 | `/user/app/TSCL00001/` | The home screen icon. |
@@ -270,6 +317,14 @@ Left to do by hand:

 ## Troubleshooting

+- **Nothing happens when the payload is sent.** If the payload cannot start,
+  it says why in a notification on the console and in
+  `/data/tailscale/launcher.log`; fetch that file over FTP. A payload manager
+  does not show what a payload prints, so sending it from a PC shows more:
+  `socat -t 30 - TCP:<console>:9021 < tailscale.elf`, or
+  `.\tools\ps5send.ps1 -File tailscale.elf -PS5Host <console>` on Windows.
+  If the log ends with "starting the Go program" and no status page appears,
+  whatever follows that line is the crash report to send.
 - **The status page does not open on the console, but does from a PC.**
  Check that the PS5's proxy server setting is "Do Not Use".
 - **The Moonlight client cannot find the host.** The host to add is
@@ -293,11 +348,18 @@ Left to do by hand:
  tailnet Tailscale encrypts it.
 - All listening TCP ports on the console, and the UDP ports in `udpPorts`,
  become reachable from your tailnet. That includes the payload loader, which
-  runs anything sent to it. Use Tailscale ACLs if other people share your
-  tailnet, or list ports under "TCP ports never exposed".
+  runs anything sent to it. If other people use your tailnet or share
+  devices into it, set **Who on the tailnet may connect** to your own devices
+  only, use Tailscale ACLs, or list ports under "TCP ports never exposed".
 - The local forwards and the proxy are for the console's own apps and are
  not exposed to the tailnet.
 - With update checks on, the console contacts `api.github.com` twice a day.
+- An update is only installed when **Install** is pressed, and only if it
+  carries a valid signature made with the project's release key, which is
+  not kept on GitHub. A release put up by someone who got into the GitHub
+  account, or changed on the way, is refused.
+- Files received with Taildrop come only from devices logged in as the same
+  user. The status page hands them out as downloads and never displays them.

 ## Resource use

@@ -314,7 +376,11 @@ the tailnet, a ProsperoLight stream from a Sunshine host through the forward,
 two forwarded hosts on different ports (with a stand-in for the second), the
 HTTP proxy, adding and removing the home screen icon, the password from the
 LAN and the tailnet, changing settings from the page, both priority settings,
-the update check, a short stay in rest mode (about a minute: the same process
+the update check, installing an update from the page (rehearsed with a test
+release, including replacing a second copy of the payload), receiving files
+with Taildrop, limiting connections to your own devices (with the
+console's owner's devices only; a refusal has not been seen for real), a
+short stay in rest mode (about a minute: the same process
 carried on and was back on the tailnet within a second of waking).

 Remote Play through the tailnet address works with Chiaki and with Asobi on
@@ -52,12 +52,67 @@ These folders are not in the repository.

 ```powershell
 # C launcher + Go program + home screen icon helper -> out\tailscale.elf
-.\tools\build-payload.ps1 -GoDir tsd -Name tailscale -Version 0.4.1 -HomeIcon
+.\tools\build-payload.ps1 -GoDir tsd -Name tailscale -Version 0.5.2 -HomeIcon
 ```

 `-HomeIcon` also builds `appicon\` into `out\appicon.elf` and embeds it in
 the launcher.

+## Making a release
+
+```powershell
+.\tools\make-release.ps1 -Version 1.2.3
+```
+
+builds the payload and puts three files in `out\release-1.2.3`:
+`tailscale.elf`, its signature `tailscale.elf.sig`, and `SHA256SUMS.txt`.
+Attach all three to the GitHub release, and tag it `v1.2.3`. The status
+page's **Install** button only offers a release that has the first two, and
+only installs it if the signature is good and is for that very version.
+
+### The signing key
+
+Releases are signed with an Ed25519 key. Its public half is
+`updatePublicKey` in `tsd\selfupdate.go`; the private half is a small file
+that stays out of the repository:
+
+```
+%APPDATA%\ps5-tailscale\release-signing.key        (Windows)
+~/.config/ps5-tailscale/release-signing.key        (Linux)
+```
+
+`PS5TS_SIGNING_KEY` names another location. The file is not encrypted, so
+that a release can be made without typing anything; treat it like an SSH
+key. The tool that manages it is `tsd\cmd\signrelease`, run from `tsd`:
+
+```powershell
+go run ./cmd/signrelease pubkey                      # show the public key
+go run ./cmd/signrelease backup -out Z:\keys\ps5-tailscale-signing.backup
+go run ./cmd/signrelease restore -in Z:\keys\ps5-tailscale-signing.backup
+```
+
+- **Back it up.** `backup` writes a copy encrypted with a passphrase you
+  type, meant for a NAS, a USB stick or a password manager. Without the
+  passphrase the copy is useless, to you as well, so keep the passphrase
+  somewhere other than next to the file.
+- **Building on another PC.** Copy the backup there and run `restore`. It
+  refuses to overwrite a key that is already present.
+- **If the key is lost,** consoles running releases made with it can no
+  longer install updates from the page: a release signed with a new key is
+  refused. Their owners have to send the new payload by hand once.
+- **If the key leaks,** make a new one (`keygen`, after moving the old file
+  away), put its public half in `selfupdate.go` and release. The same
+  one-time manual update applies.
+- **A fork** that publishes its own releases needs its own key and its own
+  `releasesAPI` in `tsd\update.go`.
+
+Test builds can use a throwaway key and a local "release":
+
+```powershell
+.\tools\build-payload.ps1 -GoDir tsd -Name test -Version 0.0.1 -HomeIcon `
+    -Set 'main.updatePublicKey=<base64>', 'main.releasesAPI=http://127.0.0.1:18099/latest.json'
+```
+
 ## Sending to the console

 ```powershell
@@ -22,6 +22,14 @@ specification.
   to a fresh 1 MB stack and jumps to the Go entry point. The embedded copy
   is then released with `madvise(MADV_FREE)`.

+The launcher keeps a log, `/data/tailscale/launcher.log` (`report.c`): the
+firmware version, each step that fails, and a last line before it jumps into
+the Go program. A failure is also shown as a notification, because a payload
+manager does not show what a payload prints. Just before the jump, stderr is
+pointed at that log, so that a Go runtime that dies before the daemon has
+opened its own log leaves its message there. What cannot be reported this
+way is a failure in the SDK's crt, which runs before any of this.
+
 **The daemon** (`tsd/`, Go): a `tsnet` server.

 - Inbound: tsnet's fallback TCP handler pipes each tailnet connection to
@@ -54,7 +62,33 @@ specification.
  the priority, before any Go code runs, so the daemon leaves it in
  `/data/tailscale/priority` for the next start.
 - Update notice (`update.go`): the latest release tag from the GitHub API,
-  twice a day, compared with the running version.
+  twice a day, compared with the running version. A newer release is shown
+  on the page and announced once on the console; the announced version is
+  kept in `/data/tailscale/update-notified`.
+- Installing an update (`selfupdate.go`, `relsig/`): on request only. The
+  release's `tailscale.elf.sig` names a version and a SHA-256 and carries an
+  Ed25519 signature over both. The daemon checks the signature against the
+  public key built into it, that the version is the release's and newer than
+  its own, downloads the payload to `/data/tailscale/update/`, compares the
+  hash, optionally replaces the copy named by `payloadPath` (temporary file,
+  then rename), and writes the payload to the ELF loader on 127.0.0.1:9021.
+  The new instance stops the old one as with any payload sent again, and
+  removes the download when it starts. The connection to the loader is kept
+  open until the old process exits, because it is the new payload's standard
+  output.
+- Taildrop (`taildrop.go`): tsnet does not link Taildrop in; importing
+  `tailscale.com/feature/taildrop` does. Received files wait in
+  `state/files/<login>-uid-<n>/`. The daemon long-polls for them, copies each
+  to `receiveDir` under a name that does not exist yet, and deletes it from
+  the holding area.
+- Who may connect (`access.go`): with `allowFrom` set to `own`, the TCP
+  handler and the UDP relays ask Tailscale who the sender is (WhoIs) and
+  serve only nodes of the same user as the console, from the console's own
+  tailnet. Answers are kept for a minute per address. Anything that cannot
+  be established is refused.
+- Key expiry (`keyexpiry.go`): the date comes from the node's own status.
+  The page warns from 14 days before, and the console shows a notification
+  at 14, 3 and 1 days.
 - When a listener reports that it had to reopen its socket (the PS5's
  network was reconfigured), the daemon asks Tailscale to rebind and re-STUN
  instead of waiting for its interface polling. See [Rest mode](#rest-mode)
@@ -137,6 +171,10 @@ apply `SOCK_NONBLOCK`/`SOCK_CLOEXEC` with `fcntl`.
 - The SDK's `kernel_mprotect()` rewrites the protection of the whole kernel
  map entry that contains the address. The loader first splits the text range
  off with an ordinary `mprotect()`.
+- `sendfile` on a socket fails with "socket is not connected". Go uses it
+  whenever a file is copied straight to a TCP connection (`io.Copy(conn,
+  file)`, `http.ServeContent` with a file), so the daemon hides the file
+  behind a plain reader in those places.
 - When the network is reconfigured (connection settings changed, Wi-Fi to
  Ethernet), listening sockets fail with errno 163, a Sony-specific code, and
  do not recover. The daemon's listeners reopen themselves
@@ -7,6 +7,7 @@
 * FreeBSD kernel would: %rdi pointing at argc/argv/envp/auxv. */

 #include <elf.h>
+#include <errno.h>
 #include <stdint.h>
 #include <stdio.h>
 #include <string.h>
@@ -17,6 +18,7 @@
 #include <ps5/kernel.h>

 #include "goload.h"
+#include "report.h"

 #define PS5_PAGE_SIZE 0x4000ul
 #define PAGE_TRUNC(x) ((x) & ~(PS5_PAGE_SIZE - 1))
@@ -134,7 +136,7 @@ goload_run(const uint8_t *image, size_t size, char *const argv[], char *const en
  int envc = 0;

  if (image_check(image, size)) {
-    fprintf(stderr, "goload: not a relocatable x86-64 ELF image\n");
+    report_fail("goload: the embedded program is not a relocatable x86-64 ELF image");
    return -1;
  }

@@ -143,7 +145,7 @@ goload_run(const uint8_t *image, size_t size, char *const argv[], char *const en
      continue;
    }
    if (phdr[i].p_offset + phdr[i].p_filesz > size) {
-      fprintf(stderr, "goload: truncated image\n");
+      report_fail("goload: the embedded program is truncated");
      return -1;
    }
    if (phdr[i].p_vaddr < min_vaddr) {
@@ -154,7 +156,7 @@ goload_run(const uint8_t *image, size_t size, char *const argv[], char *const en
    }
  }
  if (min_vaddr >= max_vaddr) {
-    fprintf(stderr, "goload: image has no loadable segments\n");
+    report_fail("goload: the embedded program has no loadable segments");
    return -1;
  }
  min_vaddr = PAGE_TRUNC(min_vaddr);
@@ -162,7 +164,7 @@ goload_run(const uint8_t *image, size_t size, char *const argv[], char *const en

  base = mmap(0, max_vaddr - min_vaddr, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
  if (base == MAP_FAILED) {
-    perror("goload: mmap image");
+    report_fail("goload: no memory for the program (mmap: %s)", strerror(errno));
    return -1;
  }
  bias = (uintptr_t)base - min_vaddr;
@@ -185,7 +187,7 @@ goload_run(const uint8_t *image, size_t size, char *const argv[], char *const en
  }
  for (size_t i = 0; rela && i < relasz / sizeof(*rela); i++) {
    if (ELF64_R_TYPE(rela[i].r_info) != R_X86_64_RELATIVE) {
-      fprintf(stderr, "goload: unsupported relocation type %u\n", (unsigned)ELF64_R_TYPE(rela[i].r_info));
+      report_fail("goload: unsupported relocation type %u", (unsigned)ELF64_R_TYPE(rela[i].r_info));
      return -1;
    }
    *(uintptr_t *)(bias + rela[i].r_offset) = bias + rela[i].r_addend;
@@ -205,18 +207,19 @@ goload_run(const uint8_t *image, size_t size, char *const argv[], char *const en
     * that contains the address, so first let a regular mprotect split the
     * text range off into an entry of its own. */
    if (mprotect((void *)start, end - start, PROT_READ)) {
-      perror("goload: mprotect");
+      report_fail("goload: mprotect: %s", strerror(errno));
      return -1;
    }
    if (kernel_mprotect(-1, start, end - start, PROT_READ | PROT_EXEC)) {
-      fprintf(stderr, "goload: kernel_mprotect failed\n");
+      report_fail("goload: could not make the program executable (kernel_mprotect failed); "
+                  "this firmware or jailbreak may not allow it");
      return -1;
    }
  }

  stack = mmap(0, GO_STACK_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
  if (stack == MAP_FAILED) {
-    perror("goload: mmap stack");
+    report_fail("goload: no memory for the stack (mmap: %s)", strerror(errno));
    return -1;
  }

@@ -251,6 +254,13 @@ goload_run(const uint8_t *image, size_t size, char *const argv[], char *const en
  fprintf(stderr, "goload: image %p..%p entry %#lx stack %p..%p argc=%d\n", base,
          base + (max_vaddr - min_vaddr), (unsigned long)(bias + ehdr->e_entry), stack, stack + GO_STACK_SIZE, argc);
  dbg_install((uintptr_t)base, min_vaddr);
+#else
+  /* From here on nothing is printed by the launcher. If the Go runtime dies
+   * before the daemon has opened its own log, its message lands in the
+   * launcher log instead of being lost with the sender's connection. */
+  report_log("launcher: starting the Go program");
+  fflush(stderr);
+  report_capture_stderr();
 #endif

  fflush(stdout);
@@ -9,6 +9,8 @@

 #ifdef ICON_HELPER

+#include "report.h"
+
 #include <fcntl.h>
 #include <stdint.h>
 #include <stdio.h>
@@ -103,6 +105,7 @@ home_icon_install_once(void) {
  addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
  if (connect(fd, (struct sockaddr *)&addr, sizeof(addr))) {
    /* No ELF loader on the usual port: go without an icon this time. */
+    report_log("launcher: home screen icon not installed: no ELF loader on port %d", LOADER_PORT);
    close(fd);
    return;
  }
@@ -139,9 +142,9 @@ home_icon_install_once(void) {
      write(fd, ICON_VERSION, sizeof(ICON_VERSION) - 1);
      close(fd);
    }
-    fprintf(stderr, "launcher: home screen icon installed\n");
+    report_log("launcher: home screen icon installed");
  } else {
-    fprintf(stderr, "launcher: home screen icon not installed: %s\n", got ? reply : "no reply from the helper");
+    report_log("launcher: home screen icon not installed: %s", got ? reply : "no reply from the helper");
  }
 }

@@ -12,6 +12,7 @@

 #include "goload.h"
 #include "homeicon.h"
+#include "report.h"

 #ifndef GO_IMAGE
 #error "GO_IMAGE must name the Go binary to embed"
@@ -154,12 +155,14 @@ main(int argc, char **argv) {
  kernel_set_ucred_rgid(pid, 0);
  kernel_set_ucred_svgid(pid, 0);

+  report_begin();
  home_icon_install_once();

  if (leave_realtime_class()) {
    /* Without this a runaway goroutine could hang the console, so do not
     * take the chance. */
-    fprintf(stderr, "launcher: could not leave the real-time scheduling class; not starting\n");
+    report_fail("launcher: could not lower the scheduling priority; not starting, "
+                "because a busy daemon could then freeze the console");
    return 1;
  }

@@ -0,0 +1,107 @@
+/* The launcher's log and its way of telling the user that a start failed. */
+
+#include <fcntl.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <sys/stat.h>
+
+#include <ps5/kernel.h>
+
+#include "report.h"
+
+#define DATA_DIR "/data/tailscale"
+/* The log is started afresh once it has grown past this. */
+#define LOG_MAX_SIZE (64 * 1024)
+
+typedef struct {
+  char unused[45];
+  char message[3075];
+} notify_request_t;
+
+int sceKernelSendNotificationRequest(int, notify_request_t *, size_t, int);
+
+static int
+log_open(void) {
+  struct stat st;
+  int flags = O_WRONLY | O_CREAT | O_APPEND;
+
+  mkdir(DATA_DIR, 0755);
+  if (!stat(LAUNCHER_LOG, &st) && st.st_size > LOG_MAX_SIZE) {
+    flags |= O_TRUNC;
+  }
+  return open(LAUNCHER_LOG, flags, 0644);
+}
+
+static void
+log_line(const char *line) {
+  char stamp[32] = "";
+  time_t now = time(0);
+  struct tm tm;
+  int fd = log_open();
+
+  if (fd < 0) {
+    return;
+  }
+  if (gmtime_r(&now, &tm)) {
+    strftime(stamp, sizeof(stamp), "%Y-%m-%d %H:%M:%S UTC ", &tm);
+  }
+  write(fd, stamp, strlen(stamp));
+  write(fd, line, strlen(line));
+  write(fd, "\n", 1);
+  close(fd);
+}
+
+void
+report_begin(void) {
+  char line[128];
+  unsigned fw = kernel_get_fw_version();
+
+  snprintf(line, sizeof(line), "launcher: starting, firmware %x.%02x, pid %d", fw >> 24, (fw >> 16) & 0xff,
+           (int)getpid());
+  log_line(line);
+}
+
+void
+report_log(const char *fmt, ...) {
+  char line[512];
+  va_list ap;
+
+  va_start(ap, fmt);
+  vsnprintf(line, sizeof(line), fmt, ap);
+  va_end(ap);
+  fprintf(stderr, "%s\n", line);
+  log_line(line);
+}
+
+void
+report_fail(const char *fmt, ...) {
+  static notify_request_t req;
+  char line[512];
+  va_list ap;
+
+  va_start(ap, fmt);
+  vsnprintf(line, sizeof(line), fmt, ap);
+  va_end(ap);
+  fprintf(stderr, "%s\n", line);
+  log_line(line);
+
+  memset(&req, 0, sizeof(req));
+  snprintf(req.message, sizeof(req.message), "Tailscale did not start:\n%s\nDetails: " LAUNCHER_LOG, line);
+  sceKernelSendNotificationRequest(0, &req, sizeof(req), 0);
+}
+
+void
+report_capture_stderr(void) {
+  int fd = log_open();
+
+  if (fd < 0) {
+    return;
+  }
+  fflush(stderr);
+  dup2(fd, 2);
+  close(fd);
+}
@@ -0,0 +1,20 @@
+#pragma once
+
+/* Where the launcher records what it did. A payload manager does not show
+ * what a payload prints, so this file is how a start that went wrong can be
+ * looked into afterwards. */
+#define LAUNCHER_LOG "/data/tailscale/launcher.log"
+
+/* Starts a new entry in the launcher log. */
+void report_begin(void);
+
+/* Writes a line to the launcher log and to whoever sent the payload. */
+void report_log(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
+
+/* Like report_log, and also tells the user on screen that Tailscale did not
+ * start. */
+void report_fail(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
+
+/* Points stderr at the launcher log, so that whatever the Go runtime prints
+ * if it dies before the daemon has opened its own log ends up there. */
+void report_capture_stderr(void);
@@ -1,5 +1,5 @@
 # Build a Go program for the PS5 and wrap it in the launcher payload.
-#   .\tools\build-payload.ps1 -GoDir tsd -Name tailscale -Version 0.4.1 -HomeIcon
+#   .\tools\build-payload.ps1 -GoDir tsd -Name tailscale -Version 0.5.2 -HomeIcon
 #   .\tools\build-payload.ps1 -GoDir probe-go -Name probe [-DebugLoader] [-Watchdog 120] [-Send]
 param(
    [Parameter(Mandatory = $true)][string]$GoDir,
@@ -7,6 +7,7 @@ param(
    [string]$Package = '.',
    [string]$Tags = '',
    [string]$Version = '',     # sets main.version in the Go program
+    [string[]]$Set = @(),      # extra Go variables, e.g. -Set main.releasesAPI=http://127.0.0.1:18099/latest.json
    [string]$MaxProcs = '',    # GOMAXPROCS for the Go program (launcher default: 4)
    [string]$GoDebug = '',     # GODEBUG value baked into the launcher
    [int]$Watchdog = 0,        # test builds: kill the process after this many seconds
@@ -28,6 +29,7 @@ $elf = Join-Path $out "$Name.elf"
 $ldflags = @()
 if (-not $KeepSymbols) { $ldflags += '-s', '-w' }
 if ($Version) { $ldflags += "-X main.version=$Version" }
+foreach ($s in $Set) { $ldflags += "-X $s" }
 $goArgs = @('build', '-buildmode=pie', '-trimpath', "-ldflags=$($ldflags -join ' ')", '-o', $bin)
 if ($Tags) { $goArgs += "-tags=$Tags" }
 $goArgs += $Package
@@ -54,7 +56,7 @@ if ($HomeIcon) {
    $ccArgs += "-DICON_HELPER=`"$($helper -replace '\\', '/')`""
 }
 $ccArgs += @('-o', $elf, (Join-Path $DevRoot 'launcher\main.c'), (Join-Path $DevRoot 'launcher\goload.c'),
-    (Join-Path $DevRoot 'launcher\homeicon.c'))
+    (Join-Path $DevRoot 'launcher\homeicon.c'), (Join-Path $DevRoot 'launcher\report.c'))
 Invoke-PS5CC @ccArgs

 Write-Host ("built {0} ({1:N1} MB)" -f $elf, ((Get-Item $elf).Length / 1MB))
@@ -0,0 +1,43 @@
+# Build the files of a release into out\release-<version>:
+#   tailscale.elf       the payload
+#   tailscale.elf.sig   its signature, which the status page's "Install" checks
+#   SHA256SUMS.txt
+#
+#   .\tools\make-release.ps1 -Version 1.2.3
+#
+# Needs the release signing key on this machine (see docs/BUILDING.md).
+param(
+    [Parameter(Mandatory = $true)][string]$Version
+)
+
+$ErrorActionPreference = 'Stop'
+. (Join-Path $PSScriptRoot 'env.ps1')
+
+if ($Version -notmatch '^\d+\.\d+\.\d+$') { throw "version must look like 1.2.3, not '$Version'" }
+
+& (Join-Path $PSScriptRoot 'build-payload.ps1') -GoDir tsd -Name tailscale -Version $Version -HomeIcon
+
+$rel = Join-Path $DevRoot "out\release-$Version"
+New-Item -ItemType Directory -Force $rel | Out-Null
+$elf = Join-Path $rel 'tailscale.elf'
+Copy-Item (Join-Path $DevRoot 'out\tailscale.elf') $elf -Force
+
+Push-Location (Join-Path $DevRoot 'tsd')
+try {
+    go run ./cmd/signrelease sign -version $Version -file $elf
+    if ($LASTEXITCODE -ne 0) { throw 'signing failed' }
+    go run ./cmd/signrelease verify -file $elf
+    if ($LASTEXITCODE -ne 0) { throw 'the signature does not verify' }
+    # The payload must carry the public half of the key it was signed with,
+    # or consoles running it could never install the release after it.
+    $pub = go run ./cmd/signrelease pubkey
+    if (-not (Select-String -Path 'selfupdate.go' -SimpleMatch $pub -Quiet)) {
+        throw "tsd\selfupdate.go does not have this machine's public key ($pub) as updatePublicKey"
+    }
+} finally { Pop-Location }
+
+$hash = (Get-FileHash $elf -Algorithm SHA256).Hash.ToLower()
+[IO.File]::WriteAllText((Join-Path $rel 'SHA256SUMS.txt'), "$hash  tailscale.elf`n")
+
+Get-ChildItem $rel | Select-Object Name, Length | Format-Table -AutoSize
+Write-Host "release files are in $rel"
@@ -0,0 +1,142 @@
+package main
+
+import (
+	"context"
+	"net"
+	"net/netip"
+	"sync"
+	"time"
+
+	"tailscale.com/tailcfg"
+)
+
+// Who on the tailnet may reach the console's services.
+//
+// Tailscale's access rules decide which devices can send to this node at
+// all. On top of that the console can be limited to its owner's devices,
+// because what it exposes (the payload loader above all) is more than most
+// tailnets' rules were written with in mind, and a device that someone else
+// shared into the tailnet is governed by rules the owner may not have looked
+// at since.
+
+const (
+	accessAll = "all" // every device the tailnet's access rules allow
+	accessOwn = "own" // only devices of the user this console is logged in as
+)
+
+// identity is what the access check needs to know about a node.
+type identity struct {
+	User    tailcfg.UserID
+	Tagged  bool
+	DNSName string
+}
+
+// ownDevice reports whether peer belongs to the same user as self. A tagged
+// node has no user: if the console itself is tagged, every device of its own
+// tailnet counts, and a tagged peer never counts otherwise. suffix is the
+// tailnet's MagicDNS suffix; a device from another tailnet never counts.
+func ownDevice(self, peer identity, suffix string) bool {
+	if peer.DNSName != "" && suffix != "" && !hasDNSSuffix(peer.DNSName, suffix) {
+		return false
+	}
+	if self.Tagged {
+		return true
+	}
+	return !peer.Tagged && peer.User != 0 && peer.User == self.User
+}
+
+// accessCache remembers recent decisions, so that a busy port does not ask
+// Tailscale about the same device for every connection.
+type accessCache struct {
+	mu      sync.Mutex
+	entries map[netip.Addr]accessEntry
+}
+
+type accessEntry struct {
+	allowed bool
+	at      time.Time
+}
+
+const accessCacheTime = time.Minute
+
+func (c *accessCache) get(addr netip.Addr) (allowed, ok bool) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	e, ok := c.entries[addr]
+	if !ok || time.Since(e.at) > accessCacheTime {
+		return false, false
+	}
+	return e.allowed, true
+}
+
+func (c *accessCache) put(addr netip.Addr, allowed bool) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	if c.entries == nil || len(c.entries) > 1024 {
+		c.entries = map[netip.Addr]accessEntry{}
+	}
+	c.entries[addr] = accessEntry{allowed: allowed, at: time.Now()}
+}
+
+func (c *accessCache) clear() {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	c.entries = nil
+}
+
+// allowedFrom reports whether the tailnet device at src may use the
+// console's services under the current setting.
+func (d *daemon) allowedFrom(src netip.Addr) bool {
+	d.mu.Lock()
+	mode := d.cfg.AllowFrom
+	d.mu.Unlock()
+	if mode != accessOwn {
+		return true
+	}
+	src = src.Unmap()
+	if allowed, ok := d.access.get(src); ok {
+		return allowed
+	}
+	allowed, who := d.lookupOwnDevice(src)
+	d.access.put(src, allowed)
+	if !allowed {
+		d.logf("refused %s (%s): only this console's owner's devices may connect", src, who)
+	}
+	return allowed
+}
+
+// lookupOwnDevice asks Tailscale who src is. Anything that cannot be
+// established counts as not allowed.
+func (d *daemon) lookupOwnDevice(src netip.Addr) (allowed bool, who string) {
+	if d.lc == nil {
+		return false, "unknown"
+	}
+	ctx, cancel := context.WithTimeout(context.Background(), 3*time.Second)
+	defer cancel()
+	st, err := d.lc.StatusWithoutPeers(ctx)
+	if err != nil || st.Self == nil {
+		return false, "unknown"
+	}
+	// WhoIs wants an address with a port; the port plays no part for a
+	// tailnet address.
+	res, err := d.lc.WhoIs(ctx, netip.AddrPortFrom(src, 1).String())
+	if err != nil || res.Node == nil {
+		return false, "unknown"
+	}
+	who = res.Node.Name
+	if res.UserProfile != nil && res.UserProfile.LoginName != "" {
+		who += ", " + res.UserProfile.LoginName
+	}
+	self := identity{User: st.Self.UserID, Tagged: st.Self.IsTagged()}
+	peer := identity{User: res.Node.User, Tagged: res.Node.IsTagged(), DNSName: res.Node.Name}
+	return ownDevice(self, peer, st.MagicDNSSuffix), who
+}
+
+// allowedFromAddr is allowedFrom for the address of a datagram.
+func (d *daemon) allowedFromAddr(from net.Addr) bool {
+	ap, err := netip.ParseAddrPort(from.String())
+	if err != nil {
+		return false
+	}
+	return d.allowedFrom(ap.Addr())
+}
@@ -0,0 +1,151 @@
+package main
+
+import (
+	"context"
+	"net"
+	"net/netip"
+	"testing"
+	"time"
+)
+
+func TestOwnDevice(t *testing.T) {
+	const suffix = "tail1234.ts.net"
+	me := identity{User: 7}
+	for _, tt := range []struct {
+		name string
+		self identity
+		peer identity
+		want bool
+	}{
+		{"same user", me, identity{User: 7, DNSName: "pc.tail1234.ts.net."}, true},
+		{"another user of the tailnet", me, identity{User: 8, DNSName: "pc.tail1234.ts.net."}, false},
+		{"tagged device of the tailnet", me, identity{User: 7, Tagged: true, DNSName: "srv.tail1234.ts.net."}, false},
+		{"shared in from another tailnet", me, identity{User: 9, DNSName: "pc.other.ts.net."}, false},
+		{"another tailnet claiming the same user", me, identity{User: 7, DNSName: "pc.other.ts.net."}, false},
+		{"unknown user", me, identity{DNSName: "pc.tail1234.ts.net."}, false},
+		{"tagged console, device of its tailnet", identity{Tagged: true}, identity{User: 8, DNSName: "pc.tail1234.ts.net."}, true},
+		{"tagged console, shared device", identity{Tagged: true}, identity{User: 8, DNSName: "pc.other.ts.net."}, false},
+	} {
+		if got := ownDevice(tt.self, tt.peer, suffix); got != tt.want {
+			t.Errorf("%s: got %v, want %v", tt.name, got, tt.want)
+		}
+	}
+}
+
+func TestAccessCache(t *testing.T) {
+	var c accessCache
+	a := netip.MustParseAddr("100.64.0.2")
+	if _, ok := c.get(a); ok {
+		t.Fatal("an empty cache had an answer")
+	}
+	c.put(a, true)
+	if allowed, ok := c.get(a); !ok || !allowed {
+		t.Fatalf("got %v, %v", allowed, ok)
+	}
+	c.clear()
+	if _, ok := c.get(a); ok {
+		t.Fatal("the cache kept its answer after clear")
+	}
+}
+
+// With the default setting nothing is asked and everything is allowed.
+func TestAllowedFromDefault(t *testing.T) {
+	d := &daemon{cfg: defaultConfig(), logf: t.Logf}
+	if !d.allowedFrom(netip.MustParseAddr("100.64.0.9")) {
+		t.Error("the default setting turned a device away")
+	}
+	// Limited to own devices, a device that cannot be identified is refused.
+	d.cfg.AllowFrom = accessOwn
+	if d.allowedFrom(netip.MustParseAddr("100.64.0.9")) {
+		t.Error("an unidentified device was let in")
+	}
+}
+
+func TestKeyWarnStage(t *testing.T) {
+	now := time.Date(2026, 10, 5, 12, 0, 0, 0, time.UTC)
+	day := 24 * time.Hour
+	for _, tt := range []struct {
+		left  time.Duration
+		stage int
+		days  int
+	}{
+		{90 * day, -1, 90},
+		{14*day + time.Hour, -1, 14},
+		{14 * day, 0, 14},
+		{5 * day, 0, 5},
+		{3 * day, 1, 3},
+		{36 * time.Hour, 1, 1},
+		{20 * time.Hour, 2, 0},
+		{-time.Hour, 2, -1},
+	} {
+		expiry := now.Add(tt.left)
+		if got := keyWarnStage(now, expiry); got != tt.stage {
+			t.Errorf("%v left: stage %d, want %d", tt.left, got, tt.stage)
+		}
+		if got := daysLeft(now, expiry); got != tt.days {
+			t.Errorf("%v left: %d days, want %d", tt.left, got, tt.days)
+		}
+	}
+	if plural(1, "day") != "1 day" || plural(3, "day") != "3 days" {
+		t.Error("plural")
+	}
+}
+
+// A relay with an allow function serves the clients it accepts and stays
+// silent towards the ones it turns down.
+func TestUDPRelayAllow(t *testing.T) {
+	echo, err := net.ListenPacket("udp", "127.0.0.1:0")
+	if err != nil {
+		t.Fatal(err)
+	}
+	defer echo.Close()
+	go func() {
+		buf := make([]byte, 1500)
+		for {
+			n, from, err := echo.ReadFrom(buf)
+			if err != nil {
+				return
+			}
+			echo.WriteTo(buf[:n], from)
+		}
+	}()
+
+	for _, allow := range []bool{true, false} {
+		var relayAddr net.Addr
+		relay, err := startUDPRelay(udpRelayConfig{
+			name: "test",
+			listen: func() (net.PacketConn, error) {
+				pc, err := net.ListenPacket("udp", "127.0.0.1:0")
+				if err == nil {
+					relayAddr = pc.LocalAddr()
+				}
+				return pc, err
+			},
+			dial: func(ctx context.Context) (net.Conn, error) {
+				var d net.Dialer
+				return d.DialContext(ctx, "udp", echo.LocalAddr().String())
+			},
+			allow: func(net.Addr) bool { return allow },
+			logf:  t.Logf,
+		})
+		if err != nil {
+			t.Fatal(err)
+		}
+		c, err := net.Dial("udp", relayAddr.String())
+		if err != nil {
+			t.Fatal(err)
+		}
+		c.Write([]byte("ping"))
+		c.SetReadDeadline(time.Now().Add(700 * time.Millisecond))
+		buf := make([]byte, 16)
+		n, err := c.Read(buf)
+		if allow && (err != nil || string(buf[:n]) != "ping") {
+			t.Errorf("allowed client: got %q, %v", buf[:n], err)
+		}
+		if !allow && err == nil {
+			t.Errorf("refused client got a reply: %q", buf[:n])
+		}
+		c.Close()
+		relay.stop()
+	}
+}
@@ -0,0 +1,382 @@
+// Command signrelease manages the release signing key and signs payloads.
+//
+//	go run ./cmd/signrelease keygen                  create the key (once)
+//	go run ./cmd/signrelease pubkey                  print the public key
+//	go run ./cmd/signrelease sign -version 1.2.3 -file tailscale.elf
+//	go run ./cmd/signrelease verify -file tailscale.elf
+//	go run ./cmd/signrelease backup -out FILE        passphrase-protected copy
+//	go run ./cmd/signrelease restore -in FILE        bring a backup onto this machine
+//
+// The key lives outside the repository, by default in the user's
+// configuration directory; PS5TS_SIGNING_KEY names another file. It is kept
+// unencrypted there so that releases can be made without typing anything.
+// A backup is encrypted with a passphrase and is meant for somewhere else: a
+// NAS, a USB stick, a password manager.
+package main
+
+import (
+	"crypto/aes"
+	"crypto/cipher"
+	"crypto/ed25519"
+	"crypto/pbkdf2"
+	"crypto/rand"
+	"crypto/sha256"
+	"encoding/base64"
+	"encoding/hex"
+	"errors"
+	"flag"
+	"fmt"
+	"io"
+	"os"
+	"path/filepath"
+	"strconv"
+
+	"golang.org/x/term"
+
+	"ps5tailscale/relsig"
+)
+
+const (
+	keyHeading    = "ps5-tailscale release signing key. Keep this file private."
+	backupHeading = "ps5-tailscale release signing key, encrypted backup."
+	kdfRounds     = 600_000
+)
+
+func main() {
+	if len(os.Args) < 2 {
+		usage()
+	}
+	var err error
+	switch cmd, args := os.Args[1], os.Args[2:]; cmd {
+	case "keygen":
+		err = keygen(args)
+	case "pubkey":
+		err = pubkey(args)
+	case "sign":
+		err = sign(args)
+	case "verify":
+		err = verify(args)
+	case "backup":
+		err = backup(args)
+	case "restore":
+		err = restore(args)
+	default:
+		usage()
+	}
+	if err != nil {
+		fmt.Fprintln(os.Stderr, "signrelease:", err)
+		os.Exit(1)
+	}
+}
+
+func usage() {
+	fmt.Fprintln(os.Stderr, "usage: signrelease keygen | pubkey | sign -version V -file F | verify -file F | backup -out F | restore -in F")
+	os.Exit(2)
+}
+
+// keyPath is where the signing key is kept on this machine.
+func keyPath() (string, error) {
+	if p := os.Getenv("PS5TS_SIGNING_KEY"); p != "" {
+		return p, nil
+	}
+	dir, err := os.UserConfigDir()
+	if err != nil {
+		return "", err
+	}
+	return filepath.Join(dir, "ps5-tailscale", "release-signing.key"), nil
+}
+
+func b64(b []byte) string { return base64.StdEncoding.EncodeToString(b) }
+
+func writeKey(path string, key ed25519.PrivateKey) error {
+	if _, err := os.Stat(path); err == nil {
+		return fmt.Errorf("%s already exists; refusing to overwrite a signing key", path)
+	}
+	if err := os.MkdirAll(filepath.Dir(path), 0o700); err != nil {
+		return err
+	}
+	text := fmt.Sprintf("%s\nprivate: %s\npublic: %s\n", keyHeading, b64(key.Seed()), b64(key.Public().(ed25519.PublicKey)))
+	return os.WriteFile(path, []byte(text), 0o600)
+}
+
+func loadKey() (ed25519.PrivateKey, string, error) {
+	path, err := keyPath()
+	if err != nil {
+		return nil, "", err
+	}
+	b, err := os.ReadFile(path)
+	if err != nil {
+		return nil, path, fmt.Errorf("no signing key (%w); run keygen, or restore a backup", err)
+	}
+	fields, err := relsig.ParseFields(b)
+	if err != nil {
+		return nil, path, err
+	}
+	seed, err := base64.StdEncoding.DecodeString(fields["private"])
+	if err != nil || len(seed) != ed25519.SeedSize {
+		return nil, path, fmt.Errorf("%s is not a signing key", path)
+	}
+	return ed25519.NewKeyFromSeed(seed), path, nil
+}
+
+func keygen(args []string) error {
+	path, err := keyPath()
+	if err != nil {
+		return err
+	}
+	_, key, err := ed25519.GenerateKey(rand.Reader)
+	if err != nil {
+		return err
+	}
+	if err := writeKey(path, key); err != nil {
+		return err
+	}
+	fmt.Printf("signing key written to %s\npublic key: %s\n", path, b64(key.Public().(ed25519.PublicKey)))
+	fmt.Println("Make a backup now: signrelease backup -out <file>")
+	return nil
+}
+
+func pubkey(args []string) error {
+	key, _, err := loadKey()
+	if err != nil {
+		return err
+	}
+	fmt.Println(b64(key.Public().(ed25519.PublicKey)))
+	return nil
+}
+
+func fileSum(path string) (string, error) {
+	f, err := os.Open(path)
+	if err != nil {
+		return "", err
+	}
+	defer f.Close()
+	h := sha256.New()
+	if _, err := io.Copy(h, f); err != nil {
+		return "", err
+	}
+	return hex.EncodeToString(h.Sum(nil)), nil
+}
+
+func sign(args []string) error {
+	fs := flag.NewFlagSet("sign", flag.ExitOnError)
+	version := fs.String("version", "", "the release's version, e.g. 1.2.3")
+	file := fs.String("file", "", "the payload to sign")
+	out := fs.String("out", "", "the signature file (default: the payload's name plus "+relsig.FileSuffix+")")
+	fs.Parse(args)
+	if *version == "" || *file == "" {
+		return errors.New("sign needs -version and -file")
+	}
+	key, _, err := loadKey()
+	if err != nil {
+		return err
+	}
+	sum, err := fileSum(*file)
+	if err != nil {
+		return err
+	}
+	sig, err := relsig.Sign(key, *version, sum)
+	if err != nil {
+		return err
+	}
+	if *out == "" {
+		*out = *file + relsig.FileSuffix
+	}
+	if err := os.WriteFile(*out, sig.Marshal(), 0o644); err != nil {
+		return err
+	}
+	fmt.Printf("signed %s as version %s -> %s\n", *file, sig.Version, *out)
+	return nil
+}
+
+func verify(args []string) error {
+	fs := flag.NewFlagSet("verify", flag.ExitOnError)
+	file := fs.String("file", "", "the payload")
+	sigFile := fs.String("sig", "", "the signature file (default: the payload's name plus "+relsig.FileSuffix+")")
+	pub := fs.String("pubkey", "", "the public key to check against (default: this machine's signing key)")
+	fs.Parse(args)
+	if *file == "" {
+		return errors.New("verify needs -file")
+	}
+	if *sigFile == "" {
+		*sigFile = *file + relsig.FileSuffix
+	}
+	var public ed25519.PublicKey
+	if *pub != "" {
+		p, err := relsig.ParsePublicKey(*pub)
+		if err != nil {
+			return err
+		}
+		public = p
+	} else {
+		key, _, err := loadKey()
+		if err != nil {
+			return err
+		}
+		public = key.Public().(ed25519.PublicKey)
+	}
+	b, err := os.ReadFile(*sigFile)
+	if err != nil {
+		return err
+	}
+	sig, err := relsig.Parse(b)
+	if err != nil {
+		return err
+	}
+	sum, err := fileSum(*file)
+	if err != nil {
+		return err
+	}
+	if sum != sig.SHA256 {
+		return errors.New("the payload does not match the signature file")
+	}
+	if !sig.Verify(public) {
+		return errors.New("the signature is not valid for this key")
+	}
+	fmt.Printf("ok: version %s, sha256 %s\n", sig.Version, sig.SHA256)
+	return nil
+}
+
+// readPassphrase asks for a passphrase without showing it.
+func readPassphrase(prompt string) ([]byte, error) {
+	fmt.Fprint(os.Stderr, prompt)
+	fd := int(os.Stdin.Fd())
+	if !term.IsTerminal(fd) {
+		return nil, errors.New("a passphrase has to be typed at a terminal")
+	}
+	p, err := term.ReadPassword(fd)
+	fmt.Fprintln(os.Stderr)
+	return p, err
+}
+
+func sealer(passphrase, salt []byte) (cipher.AEAD, error) {
+	k, err := pbkdf2.Key(sha256.New, string(passphrase), salt, kdfRounds, 32)
+	if err != nil {
+		return nil, err
+	}
+	block, err := aes.NewCipher(k)
+	if err != nil {
+		return nil, err
+	}
+	return cipher.NewGCM(block)
+}
+
+func backup(args []string) error {
+	fs := flag.NewFlagSet("backup", flag.ExitOnError)
+	out := fs.String("out", "", "where to write the encrypted backup")
+	fs.Parse(args)
+	if *out == "" {
+		return errors.New("backup needs -out")
+	}
+	if _, err := os.Stat(*out); err == nil {
+		return fmt.Errorf("%s already exists", *out)
+	}
+	key, _, err := loadKey()
+	if err != nil {
+		return err
+	}
+	p1, err := readPassphrase("Passphrase for the backup: ")
+	if err != nil {
+		return err
+	}
+	if len(p1) < 8 {
+		return errors.New("use at least 8 characters")
+	}
+	p2, err := readPassphrase("Again: ")
+	if err != nil {
+		return err
+	}
+	if string(p1) != string(p2) {
+		return errors.New("the passphrases differ")
+	}
+	text, err := sealBackup(key, p1)
+	if err != nil {
+		return err
+	}
+	if err := os.WriteFile(*out, []byte(text), 0o600); err != nil {
+		return err
+	}
+	fmt.Printf("encrypted backup written to %s\nWithout the passphrase it cannot be restored; keep the passphrase somewhere else.\n", *out)
+	return nil
+}
+
+func restore(args []string) error {
+	fs := flag.NewFlagSet("restore", flag.ExitOnError)
+	in := fs.String("in", "", "the encrypted backup")
+	fs.Parse(args)
+	if *in == "" {
+		return errors.New("restore needs -in")
+	}
+	path, err := keyPath()
+	if err != nil {
+		return err
+	}
+	if _, err := os.Stat(path); err == nil {
+		return fmt.Errorf("%s already exists; refusing to overwrite a signing key", path)
+	}
+	b, err := os.ReadFile(*in)
+	if err != nil {
+		return err
+	}
+	pass, err := readPassphrase("Passphrase of the backup: ")
+	if err != nil {
+		return err
+	}
+	key, err := openBackup(b, pass)
+	if err != nil {
+		return err
+	}
+	public := key.Public().(ed25519.PublicKey)
+	if err := writeKey(path, key); err != nil {
+		return err
+	}
+	fmt.Printf("signing key restored to %s\npublic key: %s\n", path, b64(public))
+	return nil
+}
+
+// sealBackup encrypts the key with a passphrase.
+func sealBackup(key ed25519.PrivateKey, passphrase []byte) (string, error) {
+	salt, nonce := make([]byte, 16), make([]byte, 12)
+	rand.Read(salt)
+	rand.Read(nonce)
+	aead, err := sealer(passphrase, salt)
+	if err != nil {
+		return "", err
+	}
+	public := key.Public().(ed25519.PublicKey)
+	// The public key is bound to the ciphertext, so a backup cannot be
+	// relabelled as another key's.
+	data := aead.Seal(nil, nonce, key.Seed(), public)
+	return fmt.Sprintf("%s\nRestore with: signrelease restore -in <this file>\nkdf: pbkdf2-sha256\nrounds: %d\nsalt: %s\nnonce: %s\ndata: %s\npublic: %s\n",
+		backupHeading, kdfRounds, b64(salt), b64(nonce), b64(data), b64(public)), nil
+}
+
+// openBackup decrypts a backup.
+func openBackup(b, passphrase []byte) (ed25519.PrivateKey, error) {
+	fields, err := relsig.ParseFields(b)
+	if err != nil {
+		return nil, err
+	}
+	dec := func(name string) []byte {
+		v, _ := base64.StdEncoding.DecodeString(fields[name])
+		return v
+	}
+	rounds, _ := strconv.Atoi(fields["rounds"])
+	salt, nonce, data, public := dec("salt"), dec("nonce"), dec("data"), dec("public")
+	if fields["kdf"] != "pbkdf2-sha256" || rounds != kdfRounds || len(salt) == 0 || len(nonce) != 12 || len(public) != ed25519.PublicKeySize {
+		return nil, errors.New("not a backup this version understands")
+	}
+	aead, err := sealer(passphrase, salt)
+	if err != nil {
+		return nil, err
+	}
+	seed, err := aead.Open(nil, nonce, data, public)
+	if err != nil || len(seed) != ed25519.SeedSize {
+		return nil, errors.New("wrong passphrase, or the backup is damaged")
+	}
+	key := ed25519.NewKeyFromSeed(seed)
+	if !key.Public().(ed25519.PublicKey).Equal(ed25519.PublicKey(public)) {
+		return nil, errors.New("the backup is inconsistent")
+	}
+	return key, nil
+}
@@ -0,0 +1,31 @@
+package main
+
+import (
+	"crypto/ed25519"
+	"strings"
+	"testing"
+)
+
+func TestBackupRoundTrip(t *testing.T) {
+	_, key, err := ed25519.GenerateKey(nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	text, err := sealBackup(key, []byte("correct horse"))
+	if err != nil {
+		t.Fatal(err)
+	}
+	if strings.Contains(text, b64(key.Seed())) {
+		t.Fatal("the backup contains the key in the clear")
+	}
+	got, err := openBackup([]byte(text), []byte("correct horse"))
+	if err != nil || !got.Equal(key) {
+		t.Fatalf("restore: %v", err)
+	}
+	if _, err := openBackup([]byte(text), []byte("wrong")); err == nil {
+		t.Error("a wrong passphrase was accepted")
+	}
+	if _, err := openBackup([]byte("nonsense"), []byte("x")); err == nil {
+		t.Error("nonsense was accepted as a backup")
+	}
+}
@@ -42,6 +42,17 @@ type config struct {
 	UDPPorts []uint16 `json:"udpPorts"`
 	// BlockedPorts lists local TCP ports that are never exposed to the tailnet.
 	BlockedPorts []uint16 `json:"blockedPorts,omitempty"`
+	// AllowFrom limits which tailnet devices may reach the console's services:
+	// empty for every device the tailnet's access rules allow, "own" for only
+	// the devices of the user this console is logged in as.
+	AllowFrom string `json:"allowFrom,omitempty"`
+	// PayloadPath names the copy of the payload that is started at boot, for
+	// example in a payload manager's folder. An update installed from the
+	// status page replaces that file too. Empty means there is none to keep
+	// up to date.
+	PayloadPath string `json:"payloadPath,omitempty"`
+	// ReceiveDir is where files sent to the console with Taildrop end up.
+	ReceiveDir string `json:"receiveDir"`
 	// Priority is how the daemon competes for CPU time: "low" (the default)
 	// never takes time from a game, "high" shares the CPU with games on
 	// equal terms, which can make Remote Play smoother. Applied at start.
@@ -57,6 +68,7 @@ func defaultConfig() config {
 	return config{
 		Hostname:     "ps5",
 		WebAddr:      ":8090",
+		ReceiveDir:   defaultReceiveDir,
 		UDPPorts:     slices.Clone(remotePlayUDPPorts),
 		CheckUpdates: true,
 	}
@@ -96,6 +108,12 @@ func (cfg *config) normalize() {
 		}
 		cfg.SunshineHost = ""
 	}
+	if cfg.ReceiveDir == "" {
+		cfg.ReceiveDir = defaultReceiveDir
+	}
+	if cfg.AllowFrom != accessOwn {
+		cfg.AllowFrom = ""
+	}
 	if cfg.Priority != priorityHigh {
 		cfg.Priority = ""
 	}
@@ -20,6 +20,17 @@ import (
 // connection is declined, so the peer sees an ordinary "connection refused"
 // rather than a connection that opens and closes.
 func (d *daemon) forwardToLocalhost(src, dst netip.AddrPort) (handler func(net.Conn), intercept bool) {
+	ip4, ip6 := d.srv.TailscaleIPs()
+	if !addressedTo(dst.Addr(), ip4, ip6) {
+		// Only connections to the console's own tailnet addresses are for
+		// its services. Nothing else arrives today, but if this node ever
+		// advertised routes, a connection to any address on a port that is
+		// open here must not end up at the console's service.
+		return nil, false
+	}
+	if !d.allowedFrom(src.Addr()) {
+		return nil, false
+	}
 	port := dst.Port()
 	if port == d.webPort {
 		// The status page is served on the tailnet connection itself rather
@@ -53,6 +64,12 @@ func (d *daemon) forwardToLocalhost(src, dst netip.AddrPort) (handler func(net.C
 	}, true
 }

+// addressedTo reports whether dst is one of the node's own addresses.
+func addressedTo(dst netip.Addr, own ...netip.Addr) bool {
+	dst = dst.Unmap()
+	return dst.IsValid() && slices.Contains(own, dst)
+}
+
 // pipe copies in both directions until both sides are done.
 func pipe(a, b net.Conn) {
 	done := make(chan struct{}, 2)
@@ -3,9 +3,31 @@ package main
 import (
 	"io"
 	"net"
+	"net/netip"
 	"testing"
 )

+func TestAddressedTo(t *testing.T) {
+	ip4, ip6 := netip.MustParseAddr("100.64.0.1"), netip.MustParseAddr("fd7a:115c:a1e0::1")
+	for addr, want := range map[string]bool{
+		"100.64.0.1":         true,
+		"::ffff:100.64.0.1":  true,
+		"fd7a:115c:a1e0::1":  true,
+		"100.64.0.2":         false,
+		"93.184.216.34":      false,
+		"127.0.0.1":          false,
+		"2606:4700:4700::64": false,
+	} {
+		if got := addressedTo(netip.MustParseAddr(addr), ip4, ip6); got != want {
+			t.Errorf("addressedTo(%s) = %v, want %v", addr, got, want)
+		}
+	}
+	// Before the node has its addresses nothing is for it.
+	if addressedTo(netip.Addr{}, netip.Addr{}, netip.Addr{}) {
+		t.Error("an invalid address matched")
+	}
+}
+
 // pipe must pass a half-close through: the ELF loader protocol and FTP data
 // connections both rely on the reader seeing EOF while the other direction
 // stays open.
@@ -5,6 +5,7 @@ go 1.27.1
 require (
 	github.com/skip2/go-qrcode v0.0.0-20200617195104-da1b6568686e
 	golang.org/x/crypto/x509roots/fallback v0.0.0-20260929172509-b39ff6d641ec
+	golang.org/x/term v0.46.0
 	tailscale.com v1.104.0
 )

@@ -46,7 +47,6 @@ require (
 	golang.org/x/oauth2 v0.37.0 // indirect
 	golang.org/x/sync v0.23.0 // indirect
 	golang.org/x/sys v0.48.0 // indirect
-	golang.org/x/term v0.46.0 // indirect
 	golang.org/x/text v0.42.0 // indirect
 	golang.org/x/time v0.16.0 // indirect
 	golang.zx2c4.com/wintun v0.0.0-20230126152724-0fa3db229ce2 // indirect
@@ -31,6 +31,8 @@ type udpExposer struct {
 	logf   func(format string, args ...any)
 	// targetHost is where the console's services are reached.
 	targetHost string
+	// allow, if set, decides which senders are served.
+	allow func(from net.Addr) bool

 	mu     sync.Mutex
 	addrs  []netip.Addr
@@ -71,7 +73,8 @@ func (e *udpExposer) update(addrs []netip.Addr, ports []uint16) {
 					var d net.Dialer
 					return d.DialContext(ctx, "udp", target)
 				},
-				logf: e.logf,
+				allow: e.allow,
+				logf:  e.logf,
 			})
 			if err != nil {
 				e.logf("udp %s: %v", listenAddr, err)
@@ -0,0 +1,101 @@
+package main
+
+import (
+	"context"
+	"fmt"
+	"time"
+)
+
+// A device's Tailscale key expires after a while (180 days unless the
+// tailnet says otherwise or expiry is turned off for the device). When that
+// happens to a console nobody is looking at, it simply drops off the tailnet.
+// The status page shows the date; this warns on screen as it gets close.
+
+// keyWarnDays are the points, in days before the expiry, at which the user
+// is told on screen. The status page warns from the first of them on.
+var keyWarnDays = []int{14, 3, 1}
+
+// daysLeft is the number of whole days from now until expiry, negative once
+// it has passed.
+func daysLeft(now, expiry time.Time) int {
+	d := expiry.Sub(now)
+	if d < 0 {
+		return -1
+	}
+	return int(d / (24 * time.Hour))
+}
+
+// keyWarnStage returns the index of the last warning point that has been
+// reached, or -1 if the expiry is still further away than all of them.
+func keyWarnStage(now, expiry time.Time) int {
+	left := expiry.Sub(now)
+	stage := -1
+	for i, days := range keyWarnDays {
+		if left <= time.Duration(days)*24*time.Hour {
+			stage = i
+		}
+	}
+	return stage
+}
+
+// keyExpiry returns when this console's key expires; the zero time if it
+// does not expire or is not known.
+func (d *daemon) keyExpiry(ctx context.Context) time.Time {
+	ctx, cancel := context.WithTimeout(ctx, 5*time.Second)
+	defer cancel()
+	st, err := d.lc.StatusWithoutPeers(ctx)
+	if err != nil || st.Self == nil || st.Self.KeyExpiry == nil {
+		return time.Time{}
+	}
+	return *st.Self.KeyExpiry
+}
+
+// watchKeyExpiry tells the user on screen when the key is about to expire:
+// once for each warning point reached while this process runs.
+func (d *daemon) watchKeyExpiry(ctx context.Context) {
+	ticker := time.NewTicker(time.Hour)
+	defer ticker.Stop()
+	warned := -1
+	first := time.After(2 * time.Minute)
+	for {
+		select {
+		case <-ctx.Done():
+			return
+		case <-first:
+		case <-ticker.C:
+		}
+		d.mu.Lock()
+		running := d.state == "Running"
+		d.mu.Unlock()
+		if !running {
+			continue
+		}
+		expiry := d.keyExpiry(ctx)
+		if expiry.IsZero() {
+			warned = -1
+			continue
+		}
+		now := time.Now()
+		stage := keyWarnStage(now, expiry)
+		if stage <= warned || !expiry.After(now) {
+			if stage < warned {
+				warned = stage // the key was renewed
+			}
+			continue
+		}
+		warned = stage
+		left := "in less than a day"
+		if n := daysLeft(now, expiry); n >= 1 {
+			left = "in " + plural(n, "day")
+		}
+		d.logf("this console's Tailscale key expires %s (%s)", left, expiry.Local().Format("2006-01-02"))
+		notify("Tailscale: this PS5's key expires %s.\nLog in again or turn off key expiry.\n%s", left, d.webURL())
+	}
+}
+
+func plural(n int, word string) string {
+	if n == 1 {
+		return "1 " + word
+	}
+	return fmt.Sprintf("%d %ss", n, word)
+}
@@ -12,10 +12,7 @@ import (
 // startEcho runs a TCP and a UDP echo server on the same port and returns it.
 func startEcho(t *testing.T) string {
 	t.Helper()
-	ln, err := net.Listen("tcp", "127.0.0.1:0")
-	if err != nil {
-		t.Fatal(err)
-	}
+	ln, pc := listenBoth(t)
 	t.Cleanup(func() { ln.Close() })
 	go func() {
 		for {
@@ -26,10 +23,6 @@ func startEcho(t *testing.T) string {
 			go func() { io.Copy(c, c); c.Close() }()
 		}
 	}()
-	pc, err := net.ListenPacket("udp", ln.Addr().String())
-	if err != nil {
-		t.Fatal(err)
-	}
 	t.Cleanup(func() { pc.Close() })
 	go func() {
 		buf := make([]byte, 65535)
@@ -44,14 +37,35 @@ func startEcho(t *testing.T) string {
 	return ln.Addr().String()
 }

-// freePort returns a localhost address nothing listens on.
+// listenBoth opens a TCP and a UDP socket on the same localhost port. A port
+// the system hands out for TCP is not always available for UDP (Windows
+// reserves ranges per protocol), so it tries until both work.
+func listenBoth(t *testing.T) (net.Listener, net.PacketConn) {
+	t.Helper()
+	var lastErr error
+	for range 50 {
+		ln, err := net.Listen("tcp", "127.0.0.1:0")
+		if err != nil {
+			t.Fatal(err)
+		}
+		pc, err := net.ListenPacket("udp", ln.Addr().String())
+		if err == nil {
+			return ln, pc
+		}
+		lastErr = err
+		ln.Close()
+	}
+	t.Fatal(lastErr)
+	return nil, nil
+}
+
+// freePort returns a localhost address nothing listens on, free for both
+// TCP and UDP.
 func freePort(t *testing.T) string {
 	t.Helper()
-	ln, err := net.Listen("tcp", "127.0.0.1:0")
-	if err != nil {
-		t.Fatal(err)
-	}
+	ln, pc := listenBoth(t)
 	defer ln.Close()
+	defer pc.Close()
 	return ln.Addr().String()
 }

@@ -88,6 +88,10 @@ func main() {
 		debug.Printf(format, args...)
 	}

+	// What an update installed from the status page downloaded; this may be
+	// the very copy that is running now, and it is not needed again.
+	os.RemoveAll(filepath.Join(dataDir, updateDirName))
+
 	d := &daemon{cfg: cfg, cfgPath: filepath.Join(dataDir, "config.json"), logf: logf, debug: debug, console: console, started: time.Now()}
 	if err := d.run(); err != nil {
 		logf("fatal: %v", err)
@@ -121,9 +125,11 @@ type daemon struct {
 	webPort       uint16             // port of the status page
 	lastRelogin   time.Time
 	lastNetChange time.Time
-	latest        releaseInfo // newest release known, see update.go
+	latest        releaseInfo    // newest release known, see update.go
+	update        updateProgress // an update being installed, see selfupdate.go

 	sessions   sessions         // browsers that have entered the password
+	access     accessCache      // recent decisions about who may connect
 	tailnetWeb *tailnetListener // status page connections arriving over the tailnet

 	quit     chan struct{}
@@ -186,11 +192,13 @@ func (d *daemon) run() error {

 	ctx, cancel := context.WithCancel(context.Background())
 	defer cancel()
-	d.udp = &udpExposer{listen: d.srv.ListenPacket, logf: d.logf, targetHost: "127.0.0.1"}
+	d.udp = &udpExposer{listen: d.srv.ListenPacket, logf: d.logf, targetHost: "127.0.0.1", allow: d.allowedFromAddr}
 	go d.watch(ctx)
 	go d.recoverLogin(ctx)
 	go d.exposeUDP(ctx)
 	go d.watchForUpdates(ctx)
+	go d.watchKeyExpiry(ctx)
+	go d.collectFiles(ctx)

 	sigc := make(chan os.Signal, 1)
 	signal.Notify(sigc, syscall.SIGTERM, syscall.SIGINT)
@@ -0,0 +1,114 @@
+// Package relsig signs and verifies releases.
+//
+// A release's payload comes with a small signature file. It names the
+// version and the SHA-256 of the payload and carries an Ed25519 signature
+// over both, made with a key that never leaves the maintainer's machines.
+// The daemon has the public half built in and installs an update only if the
+// signature checks out, so a tampered release, or one put up by someone who
+// got into the hosting account, is turned down.
+//
+// The version is part of what is signed, so a signature cannot be reused to
+// pass an older payload off as a newer release.
+package relsig
+
+import (
+	"bytes"
+	"crypto/ed25519"
+	"encoding/base64"
+	"encoding/hex"
+	"errors"
+	"fmt"
+	"strings"
+)
+
+// FileSuffix is appended to a payload's name for its signature file.
+const FileSuffix = ".sig"
+
+const domain = "ps5-tailscale-release-v1"
+
+// Signature is the content of a signature file.
+type Signature struct {
+	Version string // without a leading "v"
+	SHA256  string // lower-case hex of the payload's SHA-256
+	Sig     []byte
+}
+
+// message is what gets signed.
+func message(version, sum string) []byte {
+	return []byte(domain + "\nversion=" + version + "\nsha256=" + sum + "\n")
+}
+
+func clean(version, sum string) (string, string, error) {
+	version = strings.TrimPrefix(strings.TrimSpace(version), "v")
+	sum = strings.ToLower(strings.TrimSpace(sum))
+	if version == "" || strings.ContainsAny(version, " \t\r\n=") {
+		return "", "", errors.New("invalid version")
+	}
+	if b, err := hex.DecodeString(sum); err != nil || len(b) != 32 {
+		return "", "", errors.New("invalid SHA-256")
+	}
+	return version, sum, nil
+}
+
+// Sign signs a payload's version and SHA-256.
+func Sign(key ed25519.PrivateKey, version, sum string) (Signature, error) {
+	version, sum, err := clean(version, sum)
+	if err != nil {
+		return Signature{}, err
+	}
+	return Signature{Version: version, SHA256: sum, Sig: ed25519.Sign(key, message(version, sum))}, nil
+}
+
+// Verify reports whether the signature was made with the private half of pub.
+func (s Signature) Verify(pub ed25519.PublicKey) bool {
+	return len(pub) == ed25519.PublicKeySize && ed25519.Verify(pub, message(s.Version, s.SHA256), s.Sig)
+}
+
+// Marshal renders the signature file.
+func (s Signature) Marshal() []byte {
+	return []byte(fmt.Sprintf("version: %s\nsha256: %s\nsignature: %s\n",
+		s.Version, s.SHA256, base64.StdEncoding.EncodeToString(s.Sig)))
+}
+
+// Parse reads a signature file.
+func Parse(b []byte) (Signature, error) {
+	fields, err := ParseFields(b)
+	if err != nil {
+		return Signature{}, err
+	}
+	version, sum, err := clean(fields["version"], fields["sha256"])
+	if err != nil {
+		return Signature{}, err
+	}
+	sig, err := base64.StdEncoding.DecodeString(fields["signature"])
+	if err != nil || len(sig) != ed25519.SignatureSize {
+		return Signature{}, errors.New("invalid signature field")
+	}
+	return Signature{Version: version, SHA256: sum, Sig: sig}, nil
+}
+
+// ParseFields reads "name: value" lines. Lines without a colon are ignored,
+// which leaves room for a heading.
+func ParseFields(b []byte) (map[string]string, error) {
+	if len(b) > 16<<10 {
+		return nil, errors.New("file too large")
+	}
+	fields := map[string]string{}
+	for _, line := range bytes.Split(b, []byte("\n")) {
+		name, value, ok := strings.Cut(string(line), ":")
+		if !ok {
+			continue
+		}
+		fields[strings.TrimSpace(name)] = strings.TrimSpace(value)
+	}
+	return fields, nil
+}
+
+// ParsePublicKey reads a base64 public key.
+func ParsePublicKey(s string) (ed25519.PublicKey, error) {
+	b, err := base64.StdEncoding.DecodeString(strings.TrimSpace(s))
+	if err != nil || len(b) != ed25519.PublicKeySize {
+		return nil, errors.New("invalid public key")
+	}
+	return ed25519.PublicKey(b), nil
+}
@@ -0,0 +1,76 @@
+package relsig
+
+import (
+	"crypto/ed25519"
+	"crypto/sha256"
+	"encoding/base64"
+	"encoding/hex"
+	"testing"
+)
+
+func TestSignVerify(t *testing.T) {
+	pub, priv, err := ed25519.GenerateKey(nil)
+	if err != nil {
+		t.Fatal(err)
+	}
+	sum := sha256.Sum256([]byte("payload"))
+	hexSum := hex.EncodeToString(sum[:])
+
+	sig, err := Sign(priv, "v1.2.3", hexSum)
+	if err != nil {
+		t.Fatal(err)
+	}
+	if sig.Version != "1.2.3" {
+		t.Errorf("version = %q", sig.Version)
+	}
+	parsed, err := Parse(sig.Marshal())
+	if err != nil {
+		t.Fatal(err)
+	}
+	if !parsed.Verify(pub) {
+		t.Fatal("a good signature did not verify")
+	}
+
+	// The same signature must not pass for another version or payload.
+	other := parsed
+	other.Version = "1.2.4"
+	if other.Verify(pub) {
+		t.Error("the signature passed for another version")
+	}
+	other = parsed
+	otherSum := sha256.Sum256([]byte("another payload"))
+	other.SHA256 = hex.EncodeToString(otherSum[:])
+	if other.Verify(pub) {
+		t.Error("the signature passed for another payload")
+	}
+
+	// Nor with another key.
+	pub2, _, _ := ed25519.GenerateKey(nil)
+	if parsed.Verify(pub2) {
+		t.Error("the signature passed with another key")
+	}
+	if parsed.Verify(nil) {
+		t.Error("the signature passed with no key")
+	}
+
+	if got, err := ParsePublicKey(base64.StdEncoding.EncodeToString(pub)); err != nil || !got.Equal(pub) {
+		t.Errorf("ParsePublicKey: %v", err)
+	}
+}
+
+func TestParseRejects(t *testing.T) {
+	for name, text := range map[string]string{
+		"empty":         "",
+		"no signature":  "version: 1.0.0\nsha256: " + hex.EncodeToString(make([]byte, 32)) + "\n",
+		"short sum":     "version: 1.0.0\nsha256: abcd\nsignature: " + base64.StdEncoding.EncodeToString(make([]byte, 64)) + "\n",
+		"bad signature": "version: 1.0.0\nsha256: " + hex.EncodeToString(make([]byte, 32)) + "\nsignature: AAAA\n",
+		"no version":    "sha256: " + hex.EncodeToString(make([]byte, 32)) + "\nsignature: " + base64.StdEncoding.EncodeToString(make([]byte, 64)) + "\n",
+	} {
+		if _, err := Parse([]byte(text)); err == nil {
+			t.Errorf("%s: accepted", name)
+		}
+	}
+	if _, err := Sign(nil, "1.0.0", "nothex"); err == nil {
+		t.Error("Sign accepted a bad sum")
+	}
+}
@@ -0,0 +1,335 @@
+package main
+
+import (
+	"context"
+	"crypto/sha256"
+	"encoding/hex"
+	"errors"
+	"fmt"
+	"io"
+	"net"
+	"net/http"
+	"os"
+	"path"
+	"path/filepath"
+	"strings"
+	"time"
+
+	"ps5tailscale/relsig"
+)
+
+// Installing a newer release from the status page.
+//
+// Nothing here runs by itself: an update is only ever installed when someone
+// presses the button. The payload is downloaded from the release, checked
+// against the release's signature with the key built in below, and handed to
+// the ELF loader on this console, which is the same as sending the payload by
+// hand: the new copy stops this one and takes over.
+
+// updatePublicKey is the public half of the release signing key (base64
+// Ed25519). Only releases signed with the private half can be installed from
+// the status page. A fork that makes its own releases needs its own key
+// (tsd/cmd/signrelease); test builds set another one with -ldflags -X.
+var updatePublicKey = "HUcHCXGe3vNEeyt4frmoKZUqYDamdA1dzsr+Hsybda0="
+
+const (
+	payloadAsset  = "tailscale.elf"
+	maxPayload    = 128 << 20
+	loaderAddr    = "127.0.0.1:9021"
+	updateDirName = "update"
+)
+
+// updateProgress is what the status page shows about an update in progress.
+type updateProgress struct {
+	// State is "" (nothing going on), "downloading", "verifying",
+	// "installing" or "failed".
+	State   string `json:"state"`
+	Version string `json:"version,omitempty"`
+	Percent int    `json:"percent,omitempty"`
+	Error   string `json:"error,omitempty"`
+}
+
+func (d *daemon) setUpdate(p updateProgress) {
+	d.mu.Lock()
+	d.update = p
+	d.mu.Unlock()
+}
+
+// canInstall reports whether rel can be installed from the status page.
+func canInstall(rel releaseInfo) bool {
+	return newerVersion(version, rel.Version) && rel.Assets[payloadAsset] != "" && rel.Assets[payloadAsset+relsig.FileSuffix] != ""
+}
+
+// startUpdate begins installing the newest known release. It returns at
+// once; progress is reported through the status.
+func (d *daemon) startUpdate() error {
+	d.mu.Lock()
+	defer d.mu.Unlock()
+	switch d.update.State {
+	case "downloading", "verifying", "installing":
+		return errors.New("an update is already in progress")
+	}
+	rel := d.latest
+	if !newerVersion(version, rel.Version) {
+		return errors.New("no newer release is known")
+	}
+	if !canInstall(rel) {
+		return errors.New("that release has no signed payload; install it by hand")
+	}
+	d.update = updateProgress{State: "downloading", Version: rel.Version}
+	go func() {
+		if err := d.runUpdate(rel); err != nil {
+			d.logf("update to %s failed: %v", rel.Version, err)
+			d.setUpdate(updateProgress{State: "failed", Version: rel.Version, Error: err.Error()})
+		}
+	}()
+	return nil
+}
+
+func (d *daemon) runUpdate(rel releaseInfo) error {
+	pub, err := relsig.ParsePublicKey(updatePublicKey)
+	if err != nil {
+		return errors.New("this build has no release key")
+	}
+	d.logf("update: downloading %s", rel.Version)
+	ctx, cancel := context.WithTimeout(context.Background(), 15*time.Minute)
+	defer cancel()
+
+	// The signature first: it is small, and says what the payload must be.
+	sigBytes, err := httpGetSmall(ctx, rel.Assets[payloadAsset+relsig.FileSuffix])
+	if err != nil {
+		return fmt.Errorf("downloading the signature: %w", err)
+	}
+	sig, err := checkSignature(sigBytes, pub, rel.Version)
+	if err != nil {
+		return err
+	}
+
+	dir := filepath.Join(dataDir, updateDirName)
+	if err := os.MkdirAll(dir, 0o755); err != nil {
+		return err
+	}
+	file := filepath.Join(dir, payloadAsset)
+	sum, err := d.download(ctx, rel.Assets[payloadAsset], file, rel.Version)
+	if err != nil {
+		os.Remove(file)
+		return fmt.Errorf("downloading the payload: %w", err)
+	}
+	d.setUpdate(updateProgress{State: "verifying", Version: rel.Version})
+	if sum != sig.SHA256 {
+		os.Remove(file)
+		return errors.New("the downloaded payload does not match the release's signature; not installing it")
+	}
+	d.logf("update: %s verified (sha256 %s)", rel.Version, sum)
+
+	d.setUpdate(updateProgress{State: "installing", Version: rel.Version})
+	d.mu.Lock()
+	keep := d.cfg.PayloadPath
+	d.mu.Unlock()
+	if keep != "" {
+		// The copy that is started at boot. A failure here is reported but
+		// does not stop the update of the running instance.
+		if err := replaceFile(file, keep); err != nil {
+			d.logf("update: could not replace %s: %v", keep, err)
+			notify("Tailscale: could not update the copy at\n%s", keep)
+		} else {
+			d.logf("update: replaced %s", keep)
+		}
+	}
+
+	if err := sendToLoader(file); err != nil {
+		return fmt.Errorf("the update is downloaded and verified (%s), but could not be started: %w", file, err)
+	}
+	d.logf("update: handed %s to the ELF loader", rel.Version)
+
+	// The new instance stops this one within seconds. If it does not, its
+	// start failed.
+	select {
+	case <-d.quit:
+		return nil
+	case <-time.After(90 * time.Second):
+		return errors.New("the new version did not start; see /data/tailscale/launcher.log")
+	}
+}
+
+// checkSignature parses a release's signature file and checks it against the
+// release key and the version the release claims to be.
+func checkSignature(b []byte, pub []byte, wantVersion string) (relsig.Signature, error) {
+	sig, err := relsig.Parse(b)
+	if err != nil {
+		return sig, fmt.Errorf("the release's signature file is not valid: %w", err)
+	}
+	if !sig.Verify(pub) {
+		return sig, errors.New("the release is not signed with this project's release key; not installing it")
+	}
+	if sig.Version != wantVersion {
+		return sig, fmt.Errorf("the signature is for version %s, not %s; not installing it", sig.Version, wantVersion)
+	}
+	if !newerVersion(version, sig.Version) {
+		return sig, fmt.Errorf("version %s is not newer than this one", sig.Version)
+	}
+	return sig, nil
+}
+
+func httpGet(ctx context.Context, url string) (*http.Response, error) {
+	req, err := http.NewRequestWithContext(ctx, "GET", url, nil)
+	if err != nil {
+		return nil, err
+	}
+	req.Header.Set("User-Agent", "ps5-tailscale/"+version)
+	req.Header.Set("Accept", "application/octet-stream")
+	resp, err := http.DefaultClient.Do(req)
+	if err != nil {
+		return nil, err
+	}
+	if resp.StatusCode != http.StatusOK {
+		resp.Body.Close()
+		return nil, &httpStatusError{resp.Status}
+	}
+	return resp, nil
+}
+
+func httpGetSmall(ctx context.Context, url string) ([]byte, error) {
+	resp, err := httpGet(ctx, url)
+	if err != nil {
+		return nil, err
+	}
+	defer resp.Body.Close()
+	return io.ReadAll(io.LimitReader(resp.Body, 16<<10))
+}
+
+// download saves url to file and returns the SHA-256 of what was written.
+func (d *daemon) download(ctx context.Context, url, file, ver string) (string, error) {
+	resp, err := httpGet(ctx, url)
+	if err != nil {
+		return "", err
+	}
+	defer resp.Body.Close()
+	if resp.ContentLength > maxPayload {
+		return "", errors.New("the payload is implausibly large")
+	}
+	f, err := os.OpenFile(file, os.O_WRONLY|os.O_CREATE|os.O_TRUNC, 0o644)
+	if err != nil {
+		return "", err
+	}
+	h := sha256.New()
+	buf := make([]byte, 256<<10)
+	var done int64
+	lastPercent := -1
+	for {
+		n, rerr := resp.Body.Read(buf)
+		if n > 0 {
+			if done += int64(n); done > maxPayload {
+				f.Close()
+				return "", errors.New("the payload is implausibly large")
+			}
+			h.Write(buf[:n])
+			if _, err := f.Write(buf[:n]); err != nil {
+				f.Close()
+				return "", err
+			}
+			if resp.ContentLength > 0 {
+				if p := int(done * 100 / resp.ContentLength); p != lastPercent {
+					lastPercent = p
+					d.setUpdate(updateProgress{State: "downloading", Version: ver, Percent: p})
+				}
+			}
+		}
+		if rerr == io.EOF {
+			break
+		}
+		if rerr != nil {
+			f.Close()
+			return "", rerr
+		}
+	}
+	if err := f.Close(); err != nil {
+		return "", err
+	}
+	if resp.ContentLength > 0 && done != resp.ContentLength {
+		return "", errors.New("the download was cut short")
+	}
+	return hex.EncodeToString(h.Sum(nil)), nil
+}
+
+// replaceFile puts a copy of src at dst, by way of a temporary file next to
+// dst so that dst is never left half written.
+func replaceFile(src, dst string) error {
+	in, err := os.Open(src)
+	if err != nil {
+		return err
+	}
+	defer in.Close()
+	tmp := dst + ".new"
+	out, err := os.OpenFile(tmp, os.O_WRONLY|os.O_CREATE|os.O_TRUNC, 0o755)
+	if err != nil {
+		return err
+	}
+	if _, err := io.Copy(out, in); err != nil {
+		out.Close()
+		os.Remove(tmp)
+		return err
+	}
+	if err := out.Close(); err != nil {
+		os.Remove(tmp)
+		return err
+	}
+	if err := os.Rename(tmp, dst); err != nil {
+		os.Remove(tmp)
+		return err
+	}
+	return nil
+}
+
+// sendToLoader hands a payload to the ELF loader on this console.
+func sendToLoader(file string) error {
+	f, err := os.Open(file)
+	if err != nil {
+		return err
+	}
+	defer f.Close()
+	c, err := net.DialTimeout("tcp", loaderAddr, 5*time.Second)
+	if err != nil {
+		return fmt.Errorf("no ELF loader on port 9021 (%w); send the file by hand", err)
+	}
+	c.SetWriteDeadline(time.Now().Add(2 * time.Minute))
+	// Not io.Copy(c, f) with the bare file: Go would use sendfile, which the
+	// PS5 kernel refuses for sockets ("socket is not connected").
+	if _, err := io.Copy(c, onlyReader{f}); err != nil {
+		c.Close()
+		return err
+	}
+	// The half-close tells the loader that the payload is complete.
+	if tc, ok := c.(*net.TCPConn); ok {
+		tc.CloseWrite()
+	}
+	// The connection is the new payload's standard output. Keep reading it
+	// for as long as this process lives, so that nothing the payload prints
+	// while starting hits a closed socket.
+	go func() {
+		io.Copy(io.Discard, c)
+		c.Close()
+	}()
+	return nil
+}
+
+// onlyReader hides everything about a reader but Read, so that copying from
+// it takes the plain path.
+type onlyReader struct{ io.Reader }
+
+// validPayloadPath checks the setting that names the copy started at boot.
+func validPayloadPath(p string) error {
+	if p == "" {
+		return nil
+	}
+	if !strings.HasPrefix(p, "/") {
+		return errors.New("it must be a full path, such as /data/pldmgr/payloads/Tailscale/tailscale.elf")
+	}
+	if path.Clean(p) != p {
+		return errors.New("it must not contain .. or doubled slashes")
+	}
+	if path.Ext(p) != ".elf" {
+		return errors.New("it must name an .elf file")
+	}
+	return nil
+}
@@ -0,0 +1,189 @@
+package main
+
+import (
+	"bytes"
+	"context"
+	"crypto/ed25519"
+	"crypto/sha256"
+	"encoding/hex"
+	"fmt"
+	"io"
+	"net/http"
+	"net/http/httptest"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+
+	"ps5tailscale/relsig"
+)
+
+func withVersion(t *testing.T, v string) {
+	old := version
+	version = v
+	t.Cleanup(func() { version = old })
+}
+
+func TestCheckSignature(t *testing.T) {
+	withVersion(t, "1.0.0")
+	pub, priv, _ := ed25519.GenerateKey(nil)
+	otherPub, otherPriv, _ := ed25519.GenerateKey(nil)
+	_ = otherPub
+	sum := hex.EncodeToString(make([]byte, 32))
+	sign := func(key ed25519.PrivateKey, v string) []byte {
+		s, err := relsig.Sign(key, v, sum)
+		if err != nil {
+			t.Fatal(err)
+		}
+		return s.Marshal()
+	}
+
+	if _, err := checkSignature(sign(priv, "1.1.0"), pub, "1.1.0"); err != nil {
+		t.Errorf("a good signature was refused: %v", err)
+	}
+	for name, tt := range map[string]struct {
+		sig  []byte
+		want string
+	}{
+		"signed with another key":        {sign(otherPriv, "1.1.0"), "1.1.0"},
+		"signature of another version":   {sign(priv, "1.0.5"), "1.1.0"},
+		"a properly signed older build":  {sign(priv, "0.9.0"), "0.9.0"},
+		"the version that is running":    {sign(priv, "1.0.0"), "1.0.0"},
+		"not a signature file":           {[]byte("<html>not found</html>"), "1.1.0"},
+		"tampered version, same payload": {bytes.Replace(sign(priv, "1.0.5"), []byte("1.0.5"), []byte("1.1.0"), 1), "1.1.0"},
+	} {
+		if _, err := checkSignature(tt.sig, pub, tt.want); err == nil {
+			t.Errorf("%s: accepted", name)
+		}
+	}
+}
+
+func TestBuiltInKeyIsValid(t *testing.T) {
+	if _, err := relsig.ParsePublicKey(updatePublicKey); err != nil {
+		t.Fatalf("updatePublicKey: %v", err)
+	}
+}
+
+func TestCanInstall(t *testing.T) {
+	withVersion(t, "1.0.0")
+	both := map[string]string{"tailscale.elf": "u1", "tailscale.elf.sig": "u2"}
+	for _, tt := range []struct {
+		rel  releaseInfo
+		want bool
+	}{
+		{releaseInfo{Version: "1.1.0", Assets: both}, true},
+		{releaseInfo{Version: "1.0.0", Assets: both}, false},
+		{releaseInfo{Version: "1.1.0", Assets: map[string]string{"tailscale.elf": "u1"}}, false},
+		{releaseInfo{Version: "1.1.0"}, false},
+	} {
+		if got := canInstall(tt.rel); got != tt.want {
+			t.Errorf("%+v: got %v", tt.rel, got)
+		}
+	}
+}
+
+func TestFetchLatestReleaseAssets(t *testing.T) {
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		io.WriteString(w, `{"tag_name":"v1.2.3","html_url":"https://example.com/r","assets":[
+			{"name":"tailscale.elf","browser_download_url":"https://example.com/a"},
+			{"name":"tailscale.elf.sig","browser_download_url":"https://example.com/b"}]}`)
+	}))
+	defer srv.Close()
+	rel, err := fetchLatestRelease(context.Background(), srv.URL)
+	if err != nil {
+		t.Fatal(err)
+	}
+	if rel.Version != "1.2.3" || rel.Assets["tailscale.elf"] != "https://example.com/a" || rel.Assets["tailscale.elf.sig"] != "https://example.com/b" {
+		t.Errorf("got %+v", rel)
+	}
+}
+
+func TestDownloadAndReplace(t *testing.T) {
+	payload := bytes.Repeat([]byte("payload "), 100_000)
+	srv := httptest.NewServer(http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
+		switch r.URL.Path {
+		case "/ok":
+			w.Header().Set("Content-Length", fmt.Sprint(len(payload)))
+			w.Write(payload)
+		case "/short":
+			w.Header().Set("Content-Length", fmt.Sprint(len(payload)))
+			w.Write(payload[:1000])
+		default:
+			http.NotFound(w, r)
+		}
+	}))
+	defer srv.Close()
+
+	d := &daemon{logf: t.Logf}
+	dir := t.TempDir()
+	file := filepath.Join(dir, "tailscale.elf")
+	sum, err := d.download(context.Background(), srv.URL+"/ok", file, "1.1.0")
+	if err != nil {
+		t.Fatal(err)
+	}
+	want := sha256.Sum256(payload)
+	if sum != hex.EncodeToString(want[:]) {
+		t.Errorf("sum = %s", sum)
+	}
+	if d.update.State != "downloading" || d.update.Percent != 100 {
+		t.Errorf("progress = %+v", d.update)
+	}
+	if _, err := d.download(context.Background(), srv.URL+"/short", filepath.Join(dir, "short"), "1.1.0"); err == nil {
+		t.Error("a download that was cut short was accepted")
+	}
+	if _, err := d.download(context.Background(), srv.URL+"/missing", filepath.Join(dir, "missing"), "1.1.0"); err == nil {
+		t.Error("a 404 was accepted")
+	}
+
+	// Replacing the copy started at boot.
+	dst := filepath.Join(dir, "boot", "tailscale.elf")
+	os.MkdirAll(filepath.Dir(dst), 0o755)
+	os.WriteFile(dst, []byte("old"), 0o644)
+	if err := replaceFile(file, dst); err != nil {
+		t.Fatal(err)
+	}
+	got, _ := os.ReadFile(dst)
+	if !bytes.Equal(got, payload) {
+		t.Error("the file was not replaced")
+	}
+	if _, err := os.Stat(dst + ".new"); err == nil {
+		t.Error("the temporary file was left behind")
+	}
+	// A folder that does not exist: the old file elsewhere stays untouched.
+	if err := replaceFile(file, filepath.Join(dir, "nowhere", "tailscale.elf")); err == nil {
+		t.Error("replacing into a missing folder succeeded")
+	}
+}
+
+func TestStartUpdateRefusals(t *testing.T) {
+	withVersion(t, "1.0.0")
+	d := &daemon{logf: t.Logf}
+	if err := d.startUpdate(); err == nil {
+		t.Error("started with no release known")
+	}
+	d.latest = releaseInfo{Version: "1.1.0", Assets: map[string]string{"tailscale.elf": "x"}}
+	if err := d.startUpdate(); err == nil || !strings.Contains(err.Error(), "signed") {
+		t.Errorf("an unsigned release: %v", err)
+	}
+	d.update = updateProgress{State: "downloading"}
+	if err := d.startUpdate(); err == nil {
+		t.Error("started a second update")
+	}
+}
+
+func TestValidPayloadPath(t *testing.T) {
+	for p, ok := range map[string]bool{
+		"": true,
+		"/data/pldmgr/payloads/Tailscale/tailscale.elf": true,
+		"/mnt/usb0/tailscale.elf":                       true,
+		"tailscale.elf":                                 false,
+		"/data/../etc/tailscale.elf":                    false,
+		"/data//tailscale.elf":                          false,
+		"/data/pldmgr/autoload.txt":                     false,
+		"/data/tailscale/":                              false,
+	} {
+		if err := validPayloadPath(p); (err == nil) != ok {
+			t.Errorf("%q: %v", p, err)
+		}
+	}
+}
@@ -8,6 +8,7 @@ import (
 	"net"
 	"net/http"
 	"os"
+	"path"
 	"path/filepath"
 	"slices"
 	"strconv"
@@ -40,6 +41,9 @@ type settings struct {
 	UDPPorts      []uint16       `json:"udpPorts"`
 	BlockedPorts  []uint16       `json:"blockedPorts"`
 	Priority      string         `json:"priority"`
+	AllowFrom     string         `json:"allowFrom"`
+	PayloadPath   string         `json:"payloadPath"`
+	ReceiveDir    string         `json:"receiveDir"`
 	CheckUpdates  bool           `json:"checkUpdates"`
 	Verbose       bool           `json:"verbose"`

@@ -60,6 +64,9 @@ func settingsFromConfig(cfg config) settings {
 		UDPPorts:      append([]uint16{}, cfg.UDPPorts...),
 		BlockedPorts:  append([]uint16{}, cfg.BlockedPorts...),
 		Priority:      priorityLow,
+		AllowFrom:     accessAll,
+		PayloadPath:   cfg.PayloadPath,
+		ReceiveDir:    cfg.ReceiveDir,
 		CheckUpdates:  cfg.CheckUpdates,
 		Verbose:       cfg.Verbose,
 		PasswordSet:   cfg.PasswordHash != "",
@@ -67,6 +74,9 @@ func settingsFromConfig(cfg config) settings {
 	if cfg.Priority == priorityHigh {
 		s.Priority = priorityHigh
 	}
+	if cfg.AllowFrom == accessOwn {
+		s.AllowFrom = accessOwn
+	}
 	return s
 }

@@ -103,6 +113,23 @@ func (s *settings) validate() error {
 	if slices.Contains(s.UDPPorts, 0) || slices.Contains(s.BlockedPorts, 0) {
 		return fmt.Errorf("0 is not a port")
 	}
+	s.PayloadPath = strings.TrimSpace(s.PayloadPath)
+	if err := validPayloadPath(s.PayloadPath); err != nil {
+		return fmt.Errorf("payload file: %w", err)
+	}
+	s.ReceiveDir = strings.TrimSpace(s.ReceiveDir)
+	if s.ReceiveDir == "" {
+		s.ReceiveDir = defaultReceiveDir
+	}
+	if !strings.HasPrefix(s.ReceiveDir, "/") || path.Clean(s.ReceiveDir) != s.ReceiveDir || s.ReceiveDir == "/" {
+		return fmt.Errorf("folder for received files: it must be a full path, such as %s", defaultReceiveDir)
+	}
+	if s.AllowFrom == "" {
+		s.AllowFrom = accessAll
+	}
+	if s.AllowFrom != accessAll && s.AllowFrom != accessOwn {
+		return fmt.Errorf("who may connect must be all or own")
+	}
 	if s.Priority != priorityLow && s.Priority != priorityHigh {
 		return fmt.Errorf("the priority must be low or high")
 	}
@@ -194,6 +221,12 @@ func (d *daemon) handleSetConfig(w http.ResponseWriter, r *http.Request) {
 	if s.Priority == priorityHigh {
 		cfg.Priority = priorityHigh
 	}
+	cfg.PayloadPath = s.PayloadPath
+	cfg.ReceiveDir = s.ReceiveDir
+	cfg.AllowFrom = ""
+	if s.AllowFrom == accessOwn {
+		cfg.AllowFrom = accessOwn
+	}
 	cfg.CheckUpdates = s.CheckUpdates
 	cfg.Verbose = s.Verbose
 	if newHash != nil {
@@ -238,6 +271,7 @@ func (d *daemon) handleSetConfig(w http.ResponseWriter, r *http.Request) {
 		}
 	}
 	d.writePriorityFile()
+	d.access.clear()
 	// UDP ports and blocked ports are read from the config where they are used.

 	restart := []string{}
@@ -45,6 +45,17 @@
  th { text-align: left; color: var(--muted); font-weight: 500; padding: 4px 8px 8px 0; }
  td { padding: 7px 8px 7px 0; border-top: 1px solid var(--line); overflow-wrap: anywhere; }
  td.off { color: var(--muted); }
+  /* Names may wrap anywhere; addresses, OS and status stay in one piece. */
+  #peers td:nth-child(n+2), th { white-space: nowrap; overflow-wrap: normal; }
+  code.copy { cursor: pointer; border-bottom: 1px dotted var(--muted); }
+  code.copy:hover, code.copy:focus-visible { color: var(--accent); border-bottom-color: var(--accent); }
+  code.copy.done { color: var(--ok); border-bottom-color: transparent; }
+  @media (max-width: 480px) {
+    #peers code { font-size: 12.5px; } table { font-size: 14px; }
+    /* Label above value, so that names and addresses get the full width. */
+    dl { grid-template-columns: 1fr; gap: 0; }
+    dt { font-size: 13px; margin-top: 10px; }
+  }
  .actions { display: flex; flex-wrap: wrap; gap: 10px; align-items: flex-end; }
  button {
    font: inherit; padding: 9px 16px; border-radius: 8px; border: 1px solid var(--line);
@@ -90,6 +101,11 @@
  <section class="panel banner hidden" id="updatepanel">
    <strong id="updatetext"></strong>
    <a id="updatelink" target="_blank" rel="noopener">Release notes and download</a>
+    <div class="actions" style="margin-top: 12px">
+      <button id="btn-update" class="hidden">Install it</button>
+    </div>
+    <p class="note hidden" id="updatestate" style="margin: 12px 0 0"></p>
+    <p class="msg hidden" id="updatemsg"></p>
  </section>

  <section class="panel hidden" id="lockpanel">
@@ -107,6 +123,7 @@
    <div class="state"><span class="dot" id="dot"></span><span id="state">Loading…</span></div>
    <dl id="facts"></dl>
    <ul class="health hidden" id="health"></ul>
+    <p class="health hidden" id="keywarn" style="padding-left: 0"></p>
    <p class="msg hidden" id="error"></p>
  </section>

@@ -133,6 +150,18 @@
    </details>
  </section>

+  <section class="panel hidden" id="filespanel">
+    <details id="filesbox">
+      <summary><span class="heading">Received files</span><span class="count" id="filescount"></span></summary>
+      <p class="note" style="margin-top: 12px">Files sent to this console with Taildrop, from your own devices, are kept in
+        <code id="filesdir"></code>.</p>
+      <table>
+        <thead><tr><th>Name</th><th>Size</th><th>Received</th></tr></thead>
+        <tbody id="files"></tbody>
+      </table>
+    </details>
+  </section>
+
  <section class="panel hidden" id="streampanel">
    <h2>Game streaming (Moonlight to Sunshine)</h2>
    <p class="note">Apps on the PS5 cannot reach tailnet addresses directly. List the devices that run Sunshine and
@@ -162,6 +191,14 @@
            <code>passwordHash</code> from <code>/data/tailscale/config.json</code>.</span>
        </label>
        <label class="check hidden" id="set-pwremove-row"><input type="checkbox" id="set-pwremove"> Remove the password</label>
+        <label class="field">Who on the tailnet may connect to this console
+          <select id="set-allowfrom">
+            <option value="all">Every device my tailnet's access rules allow (default)</option>
+            <option value="own">Only devices logged in as the same user as this console</option>
+          </select>
+          <span class="hint">The second choice turns away other users' devices and devices shared into your
+            tailnet, for every port and this page. The page stays reachable on your home network.</span>
+        </label>
        <label class="field">UDP ports reachable from the tailnet
          <input type="text" id="set-udp" autocomplete="off">
          <span class="hint">Comma separated. 9295, 9296, 9297, 9302 are Remote Play's. Empty turns inbound UDP off.</span>
@@ -184,6 +221,15 @@
            <option value="high">High: shares the CPU with games; smoother Remote Play</option>
          </select>
        </label>
+        <label class="field">Folder for files received with Taildrop
+          <input type="text" id="set-receivedir" autocomplete="off">
+        </label>
+        <label class="field">Payload file to keep up to date
+          <input type="text" id="set-payloadpath" autocomplete="off" placeholder="None">
+          <span class="hint">Where the copy of <code>tailscale.elf</code> that starts with the console is kept, for
+            example <code>/data/pldmgr/payloads/Tailscale/tailscale.elf</code>. Installing an update from this
+            page then replaces that file too. Empty: only the running copy is updated, until the next restart.</span>
+        </label>
        <label class="field">Status page address
          <input type="text" id="set-webaddr" autocomplete="off">
        </label>
@@ -254,14 +300,50 @@ function show(id, text) {
  el.classList.toggle('hidden', !text);
 }

+// The page is served over plain HTTP, where browsers do not offer the
+// clipboard API, so fall back to the old way of copying a selection.
+async function copyText(text) {
+  try { await navigator.clipboard.writeText(text); return true; } catch (e) {}
+  const t = document.createElement('textarea');
+  t.value = text; t.setAttribute('readonly', ''); t.style.position = 'fixed'; t.style.opacity = '0';
+  document.body.append(t); t.select();
+  let ok = false;
+  try { ok = document.execCommand('copy'); } catch (e) {}
+  t.remove();
+  return ok;
+}
+
+// copyable returns a piece of monospace text that is copied when clicked.
+function copyable(text) {
+  const c = document.createElement('code');
+  c.className = 'copy'; c.textContent = text; c.title = 'Copy'; c.tabIndex = 0;
+  c.setAttribute('role', 'button'); c.setAttribute('aria-label', 'Copy ' + text);
+  const go = async () => {
+    if (c.classList.contains('done')) return;
+    const ok = await copyText(text);
+    c.textContent = ok ? 'Copied' : 'Copy failed'; c.classList.add('done');
+    setTimeout(() => { c.textContent = text; c.classList.remove('done'); }, 1200);
+  };
+  c.onclick = go;
+  c.onkeydown = ev => { if (ev.key === 'Enter' || ev.key === ' ') { ev.preventDefault(); go(); } };
+  return c;
+}
+
+// row adds a fact. mono shows the value in monospace; an array of values is
+// shown as separately copyable pieces.
 function row(dl, name, value, mono) {
  const dt = document.createElement('dt'); dt.textContent = name;
  const dd = document.createElement('dd');
-  if (mono) { const c = document.createElement('code'); c.textContent = value; dd.append(c); }
+  if (Array.isArray(value)) value.forEach((v, i) => { if (i) dd.append(', '); dd.append(copyable(v)); });
+  else if (mono) { const c = document.createElement('code'); c.textContent = value; dd.append(c); }
  else dd.textContent = value;
  dl.append(dt, dd);
 }

+// Facts are rebuilt on every refresh; skip that while nothing changed so a
+// "Copied" confirmation is not wiped out mid-way.
+let shownFacts = '';
+
 function hostRow(host, port) {
  const div = document.createElement('div');
  div.className = 'hostrow';
@@ -305,7 +387,7 @@ function peerRow(p) {
  for (const [v, mono, note] of [[p.name, false, notes.join(' · ')], [p.ip, true], [p.os], [p.online ? 'online' : 'offline']]) {
    const td = document.createElement('td');
    if (!p.online) td.className = 'off';
-    if (mono) { const c = document.createElement('code'); c.textContent = v; td.append(c); } else td.textContent = v;
+    if (mono) td.append(v ? copyable(v) : ''); else td.textContent = v;
    if (note) { const n = document.createElement('span'); n.className = 'tag'; n.textContent = note; td.append(n); }
    tr.append(td);
  }
@@ -353,20 +435,51 @@ async function refresh() {
  $('dot').className = 'dot ' + cls;
  $('version').textContent = 'ps5-tailscale ' + s.version;

-  $('updatepanel').classList.toggle('hidden', !s.latestVersion);
+  const upd = s.update || {};
+  const busy = ['downloading', 'verifying', 'installing'].includes(upd.state);
+  $('updatepanel').classList.toggle('hidden', !s.latestVersion && !upd.state);
  if (s.latestVersion) {
    $('updatetext').textContent = 'Version ' + s.latestVersion + ' is available. ';
    $('updatelink').href = s.updateURL;
  }
+  $('btn-update').classList.toggle('hidden', !s.canUpdate || busy);
+  $('btn-update').textContent = 'Install ' + (s.latestVersion || 'it');
+  show('updatestate', {
+    downloading: 'Downloading version ' + upd.version + (upd.percent ? ' (' + upd.percent + '%)' : '') + '…',
+    verifying: 'Checking the signature of version ' + upd.version + '…',
+    installing: 'Starting version ' + upd.version + '. This page reconnects by itself.',
+  }[upd.state] || '');
+  show('updatemsg', upd.state === 'failed' ? 'The update was not installed: ' + upd.error : updateRefused);

-  const dl = $('facts');
-  dl.replaceChildren();
-  row(dl, 'Name', s.dnsName || s.hostname);
-  if (s.ips.length) row(dl, 'Tailnet address', s.ips.join(', '), true);
-  if (s.tailnet) row(dl, 'Tailnet', s.tailnet);
-  if (s.ips.length) row(dl, 'Reachable from tailnet', 'every open TCP port' + (s.udpPorts.length ? '; UDP ' + s.udpPorts.join(', ') + ' (Remote Play)' : ''));
-  if (s.proxy) row(dl, 'HTTP proxy', s.proxy, true);
-  if (s.priority === 'high') row(dl, 'Priority', 'High');
+  // Key expiry, in whole days.
+  let keyText = '', keyWarn = '';
+  if (s.keyExpiry) {
+    const when = new Date(s.keyExpiry), days = Math.floor((when - Date.now()) / 86400000);
+    const date = when.toLocaleDateString(undefined, {year: 'numeric', month: 'short', day: 'numeric'});
+    const left = days < 0 ? 'expired' : days === 0 ? 'in less than a day' : 'in ' + days + (days === 1 ? ' day' : ' days');
+    keyText = date + ' (' + left + ')';
+    if (days < 14 && s.state === 'Running') {
+      keyWarn = 'This console\'s Tailscale key expires ' + left + '. After that it drops off your tailnet until you ' +
+        'use "Log in again" below. To stop it expiring, open the Tailscale admin console, find this device and ' +
+        'choose "Disable key expiry".';
+    }
+  }
+  show('keywarn', keyWarn);
+
+  const factsNow = JSON.stringify([s.dnsName, s.hostname, s.ips, s.tailnet, s.udpPorts, s.proxy, s.priority, s.allowFrom, keyText]);
+  if (factsNow !== shownFacts) {
+    shownFacts = factsNow;
+    const dl = $('facts');
+    dl.replaceChildren();
+    row(dl, 'Name', s.dnsName || s.hostname);
+    if (s.ips.length) row(dl, 'Tailnet address', s.ips);
+    if (s.tailnet) row(dl, 'Tailnet', s.tailnet);
+    if (s.ips.length) row(dl, 'Reachable from tailnet', 'every open TCP port' + (s.udpPorts.length ? '; UDP ' + s.udpPorts.join(', ') + ' (Remote Play)' : '')
+      + (s.allowFrom === 'own' ? '; only from your own devices' : ''));
+    if (keyText) row(dl, 'Key expires', keyText);
+    if (s.proxy) row(dl, 'HTTP proxy', s.proxy, true);
+    if (s.priority === 'high') row(dl, 'Priority', 'High');
+  }

  const health = $('health');
  health.replaceChildren(...(s.health || []).map(h => { const li = document.createElement('li'); li.textContent = h; return li; }));
@@ -404,6 +517,8 @@ async function refresh() {

  $('btn-lock').classList.toggle('hidden', !s.passwordSet);

+  refreshFiles();
+
  if ($('logbox').open) {
    try { $('logs').textContent = await (await api('/api/logs')).text(); } catch (e) {}
  }
@@ -426,6 +541,53 @@ async function act(path, confirmText, body) {
  }
 }

+// Received files. Asked for separately from the status, and only redrawn
+// when the list changed.
+let shownFiles = '';
+function fileSize(n) {
+  if (n < 1024) return n + ' B';
+  const units = ['KB', 'MB', 'GB', 'TB'];
+  let i = -1;
+  do { n /= 1024; i++; } while (n >= 1024 && i < units.length - 1);
+  return (n < 10 ? n.toFixed(1) : Math.round(n)) + ' ' + units[i];
+}
+async function refreshFiles() {
+  let f;
+  try { f = await (await api('/api/files')).json(); } catch (e) { return; }
+  const key = JSON.stringify(f);
+  if (key === shownFiles) return;
+  shownFiles = key;
+  $('filespanel').classList.toggle('hidden', !f.files.length);
+  $('filescount').textContent = f.files.length;
+  $('filesdir').textContent = f.dir;
+  $('files').replaceChildren(...f.files.map(file => {
+    const tr = document.createElement('tr');
+    const name = document.createElement('td');
+    const a = document.createElement('a');
+    a.href = '/api/files/get?name=' + encodeURIComponent(file.name); a.textContent = file.name; a.download = file.name;
+    name.append(a);
+    const size = document.createElement('td'); size.textContent = fileSize(file.size);
+    const when = document.createElement('td'); when.textContent = new Date(file.time).toLocaleString(undefined, {dateStyle: 'medium', timeStyle: 'short'});
+    size.style.whiteSpace = when.style.whiteSpace = 'nowrap';
+    tr.append(name, size, when);
+    return tr;
+  }));
+}
+
+let updateRefused = '';   // why the daemon would not start an update
+$('btn-update').onclick = async () => {
+  const v = $('btn-update').textContent.replace('Install ', '');
+  if (!confirm('Download and install version ' + v + '?\n\nTailscale on this PS5 restarts, which interrupts a stream or Remote Play session that runs through it.')) return;
+  updateRefused = '';
+  try {
+    const r = await api('/api/update', {method: 'POST'});
+    if (!r.ok) throw new Error((await r.text()).trim() || r.statusText);
+  } catch (e) {
+    if (e.message !== 'locked') updateRefused = e.message;
+  }
+  refresh();
+};
+
 $('btn-login').onclick = () => act('/api/login');
 $('btn-logout').onclick = () => act('/api/logout', 'Log this PS5 out of your tailnet?');
 $('btn-quit').onclick = () => act('/api/quit', 'Stop Tailscale on this PS5? Send the payload again to start it.');
@@ -477,6 +639,9 @@ async function loadSettings() {
  $('set-forwards').value = c.forwards.map(f => f.proto + ' ' + f.listen + ' ' + f.target).join('\n');
  $('set-proxy').value = c.httpProxyAddr;
  $('set-priority').value = c.priority;
+  $('set-allowfrom').value = c.allowFrom;
+  $('set-receivedir').value = c.receiveDir;
+  $('set-payloadpath').value = c.payloadPath;
  $('set-webaddr').value = c.webAddr;
  $('set-updates').checked = c.checkUpdates;
  $('set-verbose').checked = c.verbose;
@@ -502,6 +667,9 @@ $('settingsform').onsubmit = async ev => {
    udpPorts: udp,
    blockedPorts: blocked,
    priority: $('set-priority').value,
+    allowFrom: $('set-allowfrom').value,
+    receiveDir: $('set-receivedir').value.trim(),
+    payloadPath: $('set-payloadpath').value.trim(),
    checkUpdates: $('set-updates').checked,
    verbose: $('set-verbose').checked,
  };
@@ -0,0 +1,228 @@
+package main
+
+import (
+	"context"
+	"encoding/json"
+	"fmt"
+	"io"
+	"net/http"
+	"os"
+	"path/filepath"
+	"sort"
+	"strings"
+	"time"
+
+	// tsnet leaves Taildrop out unless it is linked in.
+	_ "tailscale.com/feature/taildrop"
+)
+
+// Receiving files with Taildrop.
+//
+// A file sent to the console from another device of the same user arrives
+// in a holding area inside Tailscale's state directory. The daemon moves
+// each one to a folder that can be reached with FTP, says so on screen, and
+// lists the folder on the status page.
+
+const defaultReceiveDir = "/data/tailscale/received"
+
+// receivedFile is one entry of the list on the status page.
+type receivedFile struct {
+	Name string    `json:"name"`
+	Size int64     `json:"size"`
+	Time time.Time `json:"time"`
+}
+
+func (d *daemon) receiveDir() string {
+	d.mu.Lock()
+	defer d.mu.Unlock()
+	if d.cfg.ReceiveDir == "" {
+		return defaultReceiveDir
+	}
+	return d.cfg.ReceiveDir
+}
+
+// collectFiles waits for files in the holding area and moves them out.
+func (d *daemon) collectFiles(ctx context.Context) {
+	for ctx.Err() == nil {
+		// Returns as soon as there are files, or after the wait with none.
+		files, err := d.lc.AwaitWaitingFiles(ctx, time.Minute)
+		if ctx.Err() != nil {
+			return
+		}
+		if err != nil || len(files) == 0 {
+			if err != nil && !strings.Contains(err.Error(), "context deadline exceeded") {
+				// Typically: not logged in yet, or Taildrop is turned off
+				// for the tailnet. Try again later without filling the log.
+				select {
+				case <-ctx.Done():
+					return
+				case <-time.After(30 * time.Second):
+				}
+			}
+			continue
+		}
+		dir := d.receiveDir()
+		var got []string
+		for _, f := range files {
+			name, err := d.collectFile(ctx, dir, f.Name)
+			if err != nil {
+				d.logf("taildrop: %s: %v", f.Name, err)
+				continue
+			}
+			d.logf("taildrop: received %s (%d bytes) into %s", name, f.Size, dir)
+			got = append(got, name)
+		}
+		switch len(got) {
+		case 0:
+			// Nothing could be moved; do not spin on the same files.
+			select {
+			case <-ctx.Done():
+				return
+			case <-time.After(30 * time.Second):
+			}
+		case 1:
+			notify("Tailscale: received a file\n%s\nin %s", got[0], dir)
+		default:
+			notify("Tailscale: received %d files\nin %s", len(got), dir)
+		}
+	}
+}
+
+// collectFile copies one waiting file into dir and removes it from the
+// holding area. It returns the name the file got.
+func (d *daemon) collectFile(ctx context.Context, dir, name string) (string, error) {
+	rc, _, err := d.lc.GetWaitingFile(ctx, name)
+	if err != nil {
+		return "", err
+	}
+	defer rc.Close()
+	saved, err := saveReceived(dir, name, rc)
+	if err != nil {
+		return "", err
+	}
+	if err := d.lc.DeleteWaitingFile(ctx, name); err != nil {
+		d.logf("taildrop: %s is saved, but could not be removed from the holding area: %v", name, err)
+	}
+	return saved, nil
+}
+
+// safeFileName reduces a name from another device to a plain file name.
+func safeFileName(name string) string {
+	name = strings.ReplaceAll(name, "\\", "/")
+	name = name[strings.LastIndex(name, "/")+1:]
+	name = strings.Map(func(r rune) rune {
+		if r < 0x20 || r == 0x7f {
+			return -1
+		}
+		return r
+	}, name)
+	name = strings.TrimSpace(name)
+	if name == "" || name == "." || name == ".." {
+		return "file"
+	}
+	return name
+}
+
+// saveReceived writes r to a new file in dir, named after name. A file that
+// is already there is never overwritten: the new one gets a number instead.
+func saveReceived(dir, name string, r io.Reader) (string, error) {
+	if err := os.MkdirAll(dir, 0o755); err != nil {
+		return "", err
+	}
+	name = safeFileName(name)
+	ext := filepath.Ext(name)
+	base := strings.TrimSuffix(name, ext)
+	var f *os.File
+	var err error
+	final := name
+	for n := 1; ; n++ {
+		if n > 1 {
+			final = fmt.Sprintf("%s (%d)%s", base, n, ext)
+		}
+		f, err = os.OpenFile(filepath.Join(dir, final), os.O_WRONLY|os.O_CREATE|os.O_EXCL, 0o644)
+		if err == nil {
+			break
+		}
+		if !os.IsExist(err) || n > 10000 {
+			return "", err
+		}
+	}
+	if _, err := io.Copy(f, r); err != nil {
+		f.Close()
+		os.Remove(f.Name())
+		return "", err
+	}
+	if err := f.Close(); err != nil {
+		os.Remove(f.Name())
+		return "", err
+	}
+	return final, nil
+}
+
+// listReceived returns the newest files in dir, newest first.
+func listReceived(dir string, max int) []receivedFile {
+	files := []receivedFile{}
+	entries, err := os.ReadDir(dir)
+	if err != nil {
+		return files
+	}
+	for _, e := range entries {
+		info, err := e.Info()
+		if err != nil || !info.Mode().IsRegular() {
+			continue
+		}
+		files = append(files, receivedFile{Name: e.Name(), Size: info.Size(), Time: info.ModTime()})
+	}
+	sort.Slice(files, func(i, j int) bool { return files[i].Time.After(files[j].Time) })
+	if len(files) > max {
+		files = files[:max]
+	}
+	return files
+}
+
+func (d *daemon) handleFiles(w http.ResponseWriter, r *http.Request) {
+	dir := d.receiveDir()
+	w.Header().Set("Content-Type", "application/json")
+	w.Header().Set("Cache-Control", "no-store")
+	json.NewEncoder(w).Encode(map[string]any{"dir": dir, "files": listReceived(dir, 100)})
+}
+
+// handleFileGet sends one received file to the browser.
+func (d *daemon) handleFileGet(w http.ResponseWriter, r *http.Request) {
+	name := r.URL.Query().Get("name")
+	if name == "" || name != safeFileName(name) {
+		http.Error(w, "no such file", http.StatusNotFound)
+		return
+	}
+	f, err := os.Open(filepath.Join(d.receiveDir(), name))
+	if err != nil {
+		http.Error(w, "no such file", http.StatusNotFound)
+		return
+	}
+	defer f.Close()
+	info, err := f.Stat()
+	if err != nil || !info.Mode().IsRegular() {
+		http.Error(w, "no such file", http.StatusNotFound)
+		return
+	}
+	// Always a download, never something the browser renders: the file came
+	// from elsewhere and this page's origin has the controls on it.
+	w.Header().Set("Content-Type", "application/octet-stream")
+	w.Header().Set("Content-Disposition", fmt.Sprintf("attachment; filename*=UTF-8''%s", urlPathEscape(name)))
+	w.Header().Set("X-Content-Type-Options", "nosniff")
+	// Wrapped so that Go does not use sendfile, which fails on the PS5.
+	http.ServeContent(w, r, "", info.ModTime(), struct{ io.ReadSeeker }{f})
+}
+
+func urlPathEscape(s string) string {
+	var b strings.Builder
+	for _, c := range []byte(s) {
+		switch {
+		case c >= 'a' && c <= 'z', c >= 'A' && c <= 'Z', c >= '0' && c <= '9', c == '-', c == '.', c == '_', c == '~':
+			b.WriteByte(c)
+		default:
+			fmt.Fprintf(&b, "%%%02X", c)
+		}
+	}
+	return b.String()
+}
@@ -0,0 +1,94 @@
+package main
+
+import (
+	"net/http"
+	"net/http/httptest"
+	"net/url"
+	"os"
+	"path/filepath"
+	"strings"
+	"testing"
+)
+
+func TestSafeFileName(t *testing.T) {
+	for in, want := range map[string]string{
+		"photo.jpg":              "photo.jpg",
+		"../../etc/passwd":       "passwd",
+		`C:\Users\me\notes.txt`:  "notes.txt",
+		"dir/sub/file.bin":       "file.bin",
+		"..":                     "file",
+		"":                       "file",
+		"a\x00b\n.txt":           "ab.txt",
+		"  spaced name.pkg  ":    "spaced name.pkg",
+		"save (1).zip":           "save (1).zip",
+		"/data/tailscale/x.json": "x.json",
+	} {
+		if got := safeFileName(in); got != want {
+			t.Errorf("safeFileName(%q) = %q, want %q", in, got, want)
+		}
+	}
+}
+
+func TestSaveReceivedNeverOverwrites(t *testing.T) {
+	dir := filepath.Join(t.TempDir(), "received")
+	var names []string
+	for _, content := range []string{"one", "two", "three"} {
+		name, err := saveReceived(dir, "../save.zip", strings.NewReader(content))
+		if err != nil {
+			t.Fatal(err)
+		}
+		names = append(names, name)
+	}
+	want := []string{"save.zip", "save (2).zip", "save (3).zip"}
+	for i := range want {
+		if names[i] != want[i] {
+			t.Errorf("file %d was named %q, want %q", i, names[i], want[i])
+		}
+	}
+	if b, _ := os.ReadFile(filepath.Join(dir, "save.zip")); string(b) != "one" {
+		t.Errorf("the first file was changed: %q", b)
+	}
+	// Nothing escaped the folder.
+	if _, err := os.Stat(filepath.Join(filepath.Dir(dir), "save.zip")); err == nil {
+		t.Error("a file was written outside the folder")
+	}
+
+	files := listReceived(dir, 2)
+	if len(files) != 2 {
+		t.Errorf("listReceived returned %d files, want 2", len(files))
+	}
+	if got := listReceived(filepath.Join(dir, "missing"), 10); len(got) != 0 {
+		t.Errorf("a missing folder listed %d files", len(got))
+	}
+}
+
+func TestFileDownload(t *testing.T) {
+	dir := t.TempDir()
+	os.WriteFile(filepath.Join(dir, "page.html"), []byte("<script>alert(1)</script>"), 0o644)
+	os.WriteFile(filepath.Join(filepath.Dir(dir), "secret.txt"), []byte("secret"), 0o644)
+	cfg := defaultConfig()
+	cfg.ReceiveDir = dir
+	d := &daemon{cfg: cfg, logf: t.Logf}
+
+	get := func(name string) *httptest.ResponseRecorder {
+		rec := httptest.NewRecorder()
+		d.handleFileGet(rec, httptest.NewRequest("GET", "/api/files/get?name="+url.QueryEscape(name), nil))
+		return rec
+	}
+	rec := get("page.html")
+	if rec.Code != http.StatusOK || !strings.Contains(rec.Body.String(), "alert") {
+		t.Fatalf("download: %d", rec.Code)
+	}
+	// Served as a download, not as a page of this origin.
+	if ct := rec.Header().Get("Content-Type"); ct != "application/octet-stream" {
+		t.Errorf("Content-Type = %q", ct)
+	}
+	if cd := rec.Header().Get("Content-Disposition"); !strings.HasPrefix(cd, "attachment") {
+		t.Errorf("Content-Disposition = %q", cd)
+	}
+	for _, name := range []string{"../secret.txt", "..", "", "missing.txt", `..\secret.txt`, "sub/page.html"} {
+		if rec := get(name); rec.Code != http.StatusNotFound {
+			t.Errorf("%q: status %d", name, rec.Code)
+		}
+	}
+}
@@ -27,7 +27,10 @@ type udpRelayConfig struct {
 	listen func() (net.PacketConn, error)
 	// dial opens the connection to the target for one client.
 	dial func(ctx context.Context) (net.Conn, error)
-	logf func(format string, args ...any)
+	// allow, if set, is asked once per client address whether to serve it.
+	// Datagrams from a client it turns down are dropped.
+	allow func(from net.Addr) bool
+	logf  func(format string, args ...any)
 }

 // udpFlow is the relay state for one client address.
@@ -118,6 +121,17 @@ func (r *udpRelay) readLoop() {
 		key := from.String()
 		r.mu.Lock()
 		fl := r.flows[key]
+		if fl == nil && r.cfg.allow != nil {
+			// Ask without holding the lock; the answer may take a moment.
+			r.mu.Unlock()
+			ok := r.cfg.allow(from)
+			r.mu.Lock()
+			if !ok {
+				r.mu.Unlock()
+				continue
+			}
+			fl = r.flows[key]
+		}
 		if fl == nil {
 			fl = &udpFlow{out: make(chan []byte, 256)}
 			r.flows[key] = fl
@@ -4,6 +4,8 @@ import (
 	"context"
 	"encoding/json"
 	"net/http"
+	"os"
+	"path/filepath"
 	"strconv"
 	"strings"
 	"time"
@@ -12,11 +14,15 @@ import (
 // The daemon asks GitHub now and then whether a newer release exists, so that
 // the status page can say so. It never downloads or installs anything.

-const releasesAPI = "https://api.github.com/repos/holdmysocks/ps5-tailscale/releases/latest"
+// A variable so that test builds can point it elsewhere (-ldflags -X).
+var releasesAPI = "https://api.github.com/repos/holdmysocks/ps5-tailscale/releases/latest"

 type releaseInfo struct {
 	Version string // without the leading "v"
 	URL     string
+	// Assets maps the names of the release's files to where they are
+	// downloaded from.
+	Assets map[string]string
 }

 // parseVersion reads "v1.2.3" or "1.2.3-dev" as its three numbers.
@@ -72,11 +78,19 @@ func fetchLatestRelease(ctx context.Context, url string) (releaseInfo, error) {
 	var rel struct {
 		TagName string `json:"tag_name"`
 		HTMLURL string `json:"html_url"`
+		Assets  []struct {
+			Name string `json:"name"`
+			URL  string `json:"browser_download_url"`
+		} `json:"assets"`
 	}
 	if err := json.NewDecoder(resp.Body).Decode(&rel); err != nil {
 		return releaseInfo{}, err
 	}
-	return releaseInfo{Version: strings.TrimPrefix(rel.TagName, "v"), URL: rel.HTMLURL}, nil
+	info := releaseInfo{Version: strings.TrimPrefix(rel.TagName, "v"), URL: rel.HTMLURL, Assets: map[string]string{}}
+	for _, a := range rel.Assets {
+		info.Assets[a.Name] = a.URL
+	}
+	return info, nil
 }

 type httpStatusError struct{ status string }
@@ -122,6 +136,20 @@ func (d *daemon) watchForUpdates(ctx context.Context) {
 		}
 		if rel.Version != known && newerVersion(version, rel.Version) {
 			d.logf("a newer release is available: %s (running %s)", rel.Version, version)
+			d.notifyUpdate(rel.Version)
 		}
 	}
 }
+
+// updateNotifiedFile remembers the release the user has been told about on
+// screen, so that each release is announced once and not after every start.
+const updateNotifiedFile = "update-notified"
+
+func (d *daemon) notifyUpdate(latest string) {
+	path := filepath.Join(dataDir, updateNotifiedFile)
+	if b, err := os.ReadFile(path); err == nil && strings.TrimSpace(string(b)) == latest {
+		return
+	}
+	notify("Tailscale for PS5 %s is available (this is %s).\nSee %s", latest, version, d.webURL())
+	os.WriteFile(path, []byte(latest+"\n"), 0o644)
+}
@@ -59,10 +59,18 @@ type statusInfo struct {
 	Priority string   `json:"priority"`
 	// PasswordSet says whether the page is password protected.
 	PasswordSet bool `json:"passwordSet"`
+	// AllowFrom is "all" or "own": which tailnet devices may connect.
+	AllowFrom string `json:"allowFrom"`
+	// KeyExpiry is when this console's Tailscale key expires, if it does.
+	KeyExpiry *time.Time `json:"keyExpiry,omitempty"`
 	// LatestVersion and UpdateURL are set when a newer release exists.
 	LatestVersion string `json:"latestVersion,omitempty"`
 	UpdateURL     string `json:"updateURL,omitempty"`
-	Uptime        int64  `json:"uptimeSeconds"`
+	// CanUpdate says that the newer release can be installed from the page;
+	// Update reports on an installation in progress.
+	CanUpdate bool           `json:"canUpdate"`
+	Update    updateProgress `json:"update"`
+	Uptime    int64          `json:"uptimeSeconds"`
 }

 // webHandler builds the status page and its API.
@@ -95,6 +103,8 @@ func (d *daemon) webHandler() http.Handler {
 	mux.HandleFunc("GET /api/logs", d.protect(d.handleLogs))
 	mux.HandleFunc("GET /qr.png", d.protect(d.handleQR))
 	mux.HandleFunc("GET /api/config", d.protect(d.handleGetConfig))
+	mux.HandleFunc("GET /api/files", d.protect(d.handleFiles))
+	mux.HandleFunc("GET /api/files/get", d.protect(d.handleFileGet))
 	for path, h := range map[string]http.HandlerFunc{
 		"/api/config":    d.handleSetConfig,
 		"/api/login":     d.handleLogin,
@@ -102,6 +112,7 @@ func (d *daemon) webHandler() http.Handler {
 		"/api/quit":      d.handleQuit,
 		"/api/uninstall": d.handleUninstall,
 		"/api/sunshine":  d.handleSunshine,
+		"/api/update":    d.handleUpdate,
 	} {
 		mux.HandleFunc("POST "+path, d.protect(d.guard(h)))
 	}
@@ -137,7 +148,7 @@ func writeFileTail(w io.Writer, path string, max int64) {
 	if fi, err := f.Stat(); err == nil && fi.Size() > max {
 		f.Seek(fi.Size()-max, io.SeekStart)
 	}
-	io.Copy(w, f)
+	io.Copy(w, onlyReader{f}) // no sendfile, see sendToLoader
 }

 func (d *daemon) guard(h http.HandlerFunc) http.HandlerFunc {
@@ -176,6 +187,7 @@ func (d *daemon) handleStatus(w http.ResponseWriter, r *http.Request) {
 		Hostname:      d.cfg.Hostname,
 		Proxy:         d.cfg.HTTPProxyAddr,
 		Priority:      priorityLow,
+		AllowFrom:     accessAll,
 		PasswordSet:   d.cfg.PasswordHash != "",
 		Uptime:        int64(time.Since(d.started).Seconds()),
 		IPs:           []string{},
@@ -185,12 +197,17 @@ func (d *daemon) handleStatus(w http.ResponseWriter, r *http.Request) {
 	if d.cfg.Priority == priorityHigh {
 		info.Priority = priorityHigh
 	}
+	if d.cfg.AllowFrom == accessOwn {
+		info.AllowFrom = accessOwn
+	}
 	for _, h := range d.cfg.SunshineHosts {
 		info.SunshineHosts = append(info.SunshineHosts, sunshineInfo{Host: h.Host, Port: h.basePort(), Address: h.clientAddress()})
 	}
 	if newerVersion(version, d.latest.Version) {
 		info.LatestVersion, info.UpdateURL = d.latest.Version, d.latest.URL
+		info.CanUpdate = canInstall(d.latest)
 	}
+	info.Update = d.update
 	d.mu.Unlock()
 	info.UDPPorts = []uint16{}
 	if d.udp != nil {
@@ -219,6 +236,7 @@ func (d *daemon) handleStatus(w http.ResponseWriter, r *http.Request) {
 				for _, ip := range st.Self.TailscaleIPs {
 					info.IPs = append(info.IPs, ip.String())
 				}
+				info.KeyExpiry = st.Self.KeyExpiry
 			}
 			info.Peers, info.VPNServers = peersFromStatus(st, r.URL.Query().Get("vpn") == "1")
 		}
@@ -408,3 +426,13 @@ func stopRunningInstance(webAddr string) bool {
 	}
 	return true
 }
+
+// handleUpdate starts installing the newest release.
+func (d *daemon) handleUpdate(w http.ResponseWriter, r *http.Request) {
+	if err := d.startUpdate(); err != nil {
+		http.Error(w, err.Error(), http.StatusConflict)
+		return
+	}
+	d.logf("update requested from the status page")
+	io.WriteString(w, "The update has started.\n")
+}
Author	SHA1	Message	Date
holdmysocks	070e838135	Update the status page screenshot for 0.6.0	2026-10-05 09:15:21 -04:00
holdmysocks	02fc73a04d	Receive files with Taildrop; install signed updates from the status page Taildrop: files sent to the console from the user's other devices are moved from Tailscale's holding area to /data/tailscale/received (a setting), announced on screen and listed on the status page with download links. Updates: the status page can install a newer release when asked to. A release carries tailscale.elf.sig, an Ed25519 signature over its version and SHA-256; the daemon installs only what verifies against the public key built into it, is the version the release claims and is newer than itself. The payload is handed to the ELF loader, and the copy named by the new payloadPath setting is replaced as well. - tsd/relsig, tsd/cmd/signrelease: signing, verifying, and keeping the key (keygen, passphrase-protected backup and restore). - tools/make-release.ps1 builds, signs and checksums a release. - Files are no longer copied to sockets with sendfile, which the PS5 kernel refuses.	2026-10-05 08:52:31 -04:00
holdmysocks	bc19d3c251	Report start-up failures, limit access to own devices, warn about key expiry - The launcher keeps a log (/data/tailscale/launcher.log) and shows a notification when it cannot start. A payload manager does not show what a payload prints, so a failed start used to leave no trace. The Go runtime's stderr goes to the same file until the daemon opens its log. - New setting "who on the tailnet may connect": every device the tailnet's access rules allow (default), or only devices of the same user as the console. Applies to every forwarded TCP port, the UDP ports and the status page over the tailnet. - The status page shows when the console's key expires and warns from two weeks before; the console shows a notification at 14, 3 and 1 days. - A newer release is announced once on the console, not only on the page. - Status page: click an address to copy it; OS, status and address columns no longer break mid-word; the facts stack on narrow screens.	2026-10-05 08:31:24 -04:00
holdmysocks	3e0e872884	Update the status page screenshot for the device filters	2026-10-04 19:37:21 -04:00
holdmysocks	726b9b99c4	Only pipe connections addressed to the console; 0.5.2 The fallback handler piped a tailnet connection to localhost by its port alone. Only connections to the console's own addresses reach it today, so nothing was exposed, but the handler now checks the destination address itself instead of relying on that. The README explains why the console does not offer itself as an exit node.	2026-10-04 10:40:23 -04:00