The Mac view's tunnel is its own ssh, so it now takes the headset's route (and its
pinned identity, which also checks the USB-C address), and closes when the app
switches headset. The MCP adapter's private server (FRAME_PRIVATE_SSH=1) skips the
one-server lock and can't add, remove or switch headsets.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
HTTPServer.server_bind calls socket.getfqdn, which stalled past the MCP
backend's 10-second startup window on GitHub's macOS runners.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Two servers each connected, reconnected and edited the headsets on their own,
and several review findings were ways one could move the other's install to a
different headset. A lock file in the data folder now refuses a second server
with a plain message; FRAME_CONTROL_DATA_DIR still gives a separate one.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
ssh's %C hashes only address, user and port, so two headsets reached at one
address shared a ControlMaster and one's commands could run on the other: the
ControlPath now names the headset. Another Frame Control server choosing a
different headset no longer moves this one's commands mid-install.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every change now takes a lock file shared across processes and starts from
what's on disk; reads pick up a newer file.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- While the connector is taking a queued reconnect off its list, the old
connection no longer counts as live, so no install starts on it.
- Importing a block without a Port takes the port ssh would really use
(ssh -F <config> -G), e.g. one a later Host * sets.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- An upload's answer arriving after a switch opens nothing; the APK
alternatives dialog installs on the headset the APK was checked for.
- A handshake that goes silent (e.g. a jump host's forward hanging) moves on
to the next address.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Behind a jump host, a forward it couldn't open moves on to the next address;
only a refused key stops (judged by ssh's words, not the step).
- Add a headset suggests an alias no Host in ~/.ssh/config already uses.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A jump host's own "Authenticated to" line no longer counts as the headset's,
and a master that logs in but doesn't start lets the next address be tried.
- Devices tab changes refresh through the ordered list load, so a late answer
can't undo a newer selection.
- A probe's time out starts after the name lookup: macOS can take 5 s to look
up a .local name (found on the real Frame once its USB link went away).
- An attempt's ending is published from a method, not a return in finally.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A switch the server refuses no longer drops answers the page is waiting for
(an install's job id): only an actual change of headset does.
- Test now goes through a jump host when the alias uses one.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A set-up headset whose alias goes through a jump host (ProxyJump or
ProxyCommand in ~/.ssh/config) is reached through it, address by address,
still pinned per headset.
- A refused switch puts the header's switcher back on the headset in use.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A command that fails after a switch doesn't make the connector drop the new
headset's connection.
- On first import, the app keeps using the `frame` headset even when Set Up
Connection put another block above it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Terminals, power and a reconnect's probes use the route commands have now
(a pinned bare-alias destination, a login change still deferred).
- Saving port 22 keeps an explicit Port line where there was one.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A bare alias's route is pinned to where ~/.ssh/config sent it when it was
routed (HostName, Port, User), so editing that file can't move an install.
- Renaming during an install is allowed: only a real user or port change waits.
- The Devices tab follows a network change even while the headset is offline.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Retry now (while connected) and Forget identity wait for running installs.
- Terminal windows get the headset's address by name, so a link-local IPv6
zone never has to pass through Windows' console.
- Renaming the headset in use shows at once in the header.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Every command to a set-up headset checks its pinned key
(StrictHostKeyChecking=yes, whatever ~/.ssh/config says); only the
connector's first handshake may save one.
- A reconnect during an install keeps the whole route it started with, also
when a bare alias is set up meanwhile.
- Removing the headset FRAME_ALIAS named doesn't bring it back as a bare alias.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A reconnect while an install runs keeps the login it started with; a new
one from ~/.ssh/config applies after.
- Frame > Open SSH goes through the server, so it uses the same headset and
address as the app and refuses when there's none.
- A bare frame alias in use when a headset is set up stays selectable.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A headset set up while a bare alias is in use doesn't take over by itself;
a login change from ~/.ssh/config waits for running installs.
- Saving a headset writes only the login fields that changed, and only if the
block still holds the old ones.
- SSH, SFTP, power and remote desktop open with the same headset and address
as every other command, and refuse when there's no address.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Removing or moving the active headset's address waits for running installs,
like switching.
- A volume change still waiting to be sent goes to the headset whose slider
it was, and a switch cancels it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A title waiting its turn to be read stays with the headset it was dropped
on, and is dropped if the app switches meanwhile.
- Probes still finishing from an earlier attempt can't overwrite the rows of
a newer one.
- The FRAME_ALIAS the server started with stays on the list after switching
away, so it can be picked again.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A batch of dropped files stays with the headset it was dropped on, and
stops if the app switches.
- Removing or moving the address in use reroutes at once; a headset with no
addresses reaches nothing rather than whatever ~/.ssh/config says.
- A late answer to an older device-list request is ignored.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Removing every headset leaves none in use (commands fail at once) instead of
falling back to the `frame` alias.
- ssh goes to the IP that answered for IPv6 too, with a link-local address's
interface (verified: frame.local over fe80::…%en9 on the real Frame).
- Find results only show in the panel of the headset they were for.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
