mitch030504--Wiicompiled_VR_Frame/OPENXR.md

Experimental OpenXR VR

WiiCompiled has an opt-in OpenXR rendering path. The first functional backend is Windows D3D12. It asks the OpenXR runtime for the required GPU before Aurora creates Dawn, then copies each eye on that same D3D12 device and queue into the acquired OpenXR swapchain images. Eye submission stays on the GPU; there is no CPU texture readback and no second graphics device.

This is an experimental renderer, not yet a release-ready VR mode.

Requirements

• A Windows OpenXR runtime selected as the system's active runtime.
• A connected headset supported by that runtime.
• A D3D12-capable GPU and driver accepted by both OpenXR and Dawn.
• A build made with MKW_ENABLE_OPENXR=ON, which defaults on for Windows and off elsewhere while the Vulkan bridge remains capability-gated.

For managed installation, use WheelWizard VR and enable Settings → Other → WiiCompiled (beta) → Enable WiiCompiled OpenXR VR (beta). The launcher sets vr.enabled=true, vr.required=false, and video.graphics_api="d3d12" before each VR launch, preserving other preferences. Its portable configuration lives at RecompVR/UserData/Config.toml beneath WheelWizard's data folder. Normal graphics settings remain in Recomp/UserData/Config.toml. Both backends use the normal installation's effective NAND.

Standalone launches start in VR too: this is the VR build, and required = false makes a failed headset startup fall back to the desktop renderer rather than stop the game. Config.toml is created with the following defaults, and a configuration that never mentions enabled reads the same way:

[vr]
enabled = true
required = false
mirror_view = "normal"
controller_mode = "wii_remote"
frame_interpolation_fps = 0
render_scale = 1.0
world_units_per_meter = 500.0
hud_distance_meters = 2.0
hud_width_meters = 2.4
hud_virtual_screen = true
stop_at_display_copy = true
skip_copy_clears = true
first_person = false
first_person_units_per_meter = 30.0
first_person_head_up_meters = 3.0
first_person_head_forward_meters = 0.0
first_person_head_right_meters = 0.0
first_person_hide_driver = true
first_person_hidden_model = 0
first_person_rotation = "yaw"

To play this installation on the desktop instead, set enabled = false, close the game completely, and start it again. These settings are read only at launch. The in-game F10 settings bar also exposes the enable switch, but a restart is still required.

required = false is the safe default: an absent runtime, disconnected headset, unsupported GPU, or graphics-binding failure is logged and the game continues in ordinary desktop mode. A temporary notification explains the failure; the message remains available under F10 → VR. Set it to true only when a failed VR startup should stop the game with an error.

mirror_view chooses what the desktop window shows while the headset is running: "normal" keeps the ordinary desktop view, "both", "left" and "right" mirror the headset's eyes, and "none" blacks the window out. It is live and can be changed from the F10 settings bar, where it sits directly under the enable switch as Desktop view. Menus reach the headset as a virtual screen carrying the desktop image itself, so there is no separate eye view to mirror there and the three eye choices show that same image; only "none" differs. The F10 bar is drawn over whichever image is chosen, so the setting can always be changed back. Eye mirror modes retain the last eye image when a desktop frame has no new XR packet, so they do not alternate with the normal camera. "none" also stays black between XR packets.

Local multiplayer

During 2-, 3-, and 4-player races, the headset replays Player 1's world in immersive stereo with head tracking. Keep F10 > VR > Desktop view set to Normal (mirror_view = "normal") for the original desktop split-screen layout. No extra multiplayer switch is required. Menus continue to use the virtual screen.

Only headset replay filters the other players' viewports and expands Player 1 to each eye. The desktop split-screen partition (the game's partition_line layout, one-pixel textured picture panes on the split boundaries) and full masks of the other panes are omitted from the eyes; the desktop image keeps them. Player-local HUD viewports follow Player 1; shared orthographic overlays keep their full-screen layout on the virtual screen. Framebuffer effects that sample the desktop split-screen image are omitted from multiplayer eyes, since those textures contain the other cameras too. The local-screen count is sealed with each frame, including retained VR interpolation frames, and a layout change invalidates older XR packets.

Multiplayer uses Player 1's game camera. The optional first-person relocation and model hiding remain single-player-only: guest model visibility changes would also affect the desktop players.

The opt-in stereo_multiplayer_smoke D3D12 test reads back both eye images and the desktop EFB for 1/2/3/4/1-screen transitions with VR interpolation on and off. Actual headset racing still needs visual validation for course effects, HUD layout, pause/resume, and scene transitions.

F10 > VR > VR frame interpolation (experimental) offers Off, Auto, 72, 90, 120 and applies immediately. frame_interpolation_fps stores 0 for Off (the default), 1 for Auto, or the selected rate. The earlier frame_interpolation = true checkbox migrates to Auto. Auto renders at the headset's display deadlines; the numbered choices cap the rate of new stereo frames. They do not change the headset's physical refresh setting. For VDXR with Virtual Desktop set to 90 Hz, select Auto or 90. The menu shows both the detected headset rate and the rate of newly rendered VR frames, excluding repeated images. Menus and other virtual-screen scenes continue at the game's rate; assess interpolation during an immersive race.

VR interpolation is independent of Graphics > Race frame interpolation. The simulation, physics, audio and VI remain at 60 Hz. Scene motion is delayed by one game frame (about 16.7 ms) to interpolate between known transforms; each rendered eye pair uses a fresh predicted head pose. This needs enough GPU headroom to render both eyes at the target rate, and carries the desktop interpolator's experimental artifacts, especially for unmatched or changing geometry.

Refresh detection uses XR_FB_display_refresh_rate when available and the OpenXR predicted display period otherwise. Interpolation requires XR_KHR_win32_convert_performance_counter_time to relate those display deadlines to the game's clock; the menu reports if it is unavailable. The old Eager Frame Heartbeat option has been removed and existing eager_frame_heartbeat settings are ignored. Completed rendering wakes the XR thread immediately. A 50 ms keep-alive still protects pauses and window dragging without eager repeats during rendering.

render_scale scales the per-eye size recommended by the OpenXR runtime. world_units_per_meter controls the scale of headset translation in the game world. hud_distance_meters and hud_width_meters place and size the virtual screen. They are read at launch and govern both the menu screen and the in-race 2D screen, so 2D content keeps its place across the transition. hud_virtual_screen decides whether the race's 2D layer uses that screen; it is live and can be flipped from the F10 settings bar. stop_at_display_copy ends eye replay at the final GXCopyDisp, matching the frame shown on the desktop. skip_copy_clears independently suppresses the EFB reset performed after a copy. Both default on and can be changed live from the F10 settings bar for diagnostics. first_person and the first_person_* values are the first-person camera described below. All four are live and are also exposed in the F10 settings bar.

Controllers

The headset's tracked controllers reach the game through an OpenXR action set synced on the pacing thread (runtime/src/vr/openxr_input.cpp), which feeds a virtual SDL gamepad that Aurora assigns to a port like any other. controller_mode decides what the game finds on that port, and is live from F10 > VR > VR controllers; the game sees a change as a controller reconnection.

"wii_remote", the default, presents them as a Wii Remote with a Nunchuk, the way DolphinXR's OpenXR Wii Remote does, including its default OpenXR Wii Remote profile for the Touch controllers. The port is served through KPAD like a Bluetooth remote (wii_remote_input.cpp), so WPADProbe reports a Nunchuk and the game runs its own Wii Remote + Nunchuk control scheme:

Controller	Wii
Right A	A
Right trigger	B
Right stick up / down	1 / 2
Right stick left / right	− / +
Left stick	Nunchuk stick
Left trigger	Z
Left grip	C
Left menu	HOME
Right controller motion and aim	Wii Remote accelerometer and pointer
Left controller motion	Nunchuk accelerometer

Analog inputs count as pressed past half travel. Right B, left X/Y and the stick clicks are unbound, as in DolphinXR's profile. The game's Wii Remote rumble vibrates both controllers, subject to the ordinary controller-vibration switch.

Motion. Each XR frame the aim and grip poses are located at the measured current time (XR_KHR_win32_convert_performance_counter_time, XR_KHR_convert_timespec_time on Android), not the predicted display time, whose extrapolation sprays fast wrist motion. The grip's linear velocity, averaged with one derived from its position, is differentiated over XrTime into acceleration; gravity is added and the result is expressed in the aim pose's frame. KPAD's accelerometer axes are the aim pose's (x, -y, z) in g: a level controller reads (0, -1, 0), pointing at the floor (0, 0, 1). Readings saturate at ±3.6 g like the remote's sensor, and a controller that loses tracking repeats its last reading. The game's own motion detection (tricks, wheelies) then works on these readings as it would on a remote's.

Pointer. The pointer is absolute, as in DolphinXR: the right controller's aim ray is intersected with the screen the renderer is showing, and the point it meets is where the cursor goes, so there is nothing to recenter. On the menu screen that is the quad layer, hud_width_meters across with the eye texture's aspect, and the pointer spans the game picture inside it (Aurora letterboxes the desktop image into the quad and the picture into the desktop image, so a 4:3 picture keeps its pillarboxes). During a race it is the 2D layer's screen, hud_distance_meters ahead of the latched race origin and turned by the lean-back angle, with the picture's aspect. With hud_virtual_screen = false the race's 2D layer has no fixed place and the pointer is off. The game's own pointer switch (KPADEnableDpd / KPADDisableDpd) is honoured as well.

The hit becomes KPAD's pos (−1..1 across the picture, +y down), horizon (the controller's roll on the screen) and dist (perpendicular distance in metres, so rotating the controller does not change it). Like a real remote's camera, the pointer keeps tracking up to 1.9 half-widths and 1.5 half-heights past the picture's centre; a lost hit or an excursion beyond that holds or pins the cursor for 100 ms before it disappears, so tracking spikes during fast motion do not drop it. Raw IR camera dots in KPADGetUnifiedWpadStatus stay invalid; the game reads the pointer from KPADStatus.

Settings in the headset. Clicking both thumbsticks together opens the settings panel described below; while it is open the controllers operate the panel and the game sees them idle.

"gamepad" keeps the controllers one ordinary gamepad read through PAD as a GameCube controller: A/B → South/East, X/Y → West/North, index triggers → trigger axes, grips → shoulders, thumbsticks → sticks (clicks → stick buttons), left menu → Start. Every binding in the F10 controller menu applies.

Bindings are suggested for oculus/touch_controller (Quest 2, 3 and Pro) and khr/simple_controller. mkw_vr_wii_remote_tests checks the accelerometer frame, the pointer raycast and debounce, the picture placement and the button profile without a headset.

Settings in the headset

The F10 settings bar is only visible on the desktop window, so the same settings are also offered on a panel inside the headset, in menus and during an immersive race alike, including on the Quest. Click both thumbsticks together to open it, and again to close it; the left controller's menu button and the panel's Close button also close it. It can be opened from the desktop as well, with F10 → VR → Show these settings in the headset.

The panel has the F10 bar's menus as tabs (VR, Graphics, Controllers, Audio, Diagnostics) and a Recenter view button. Aim a controller at it: the cursor goes where you aim, a trigger (or A / X) selects and drags sliders, and a thumbstick scrolls. Whichever hand last pulled its trigger does the pointing. Changes apply exactly as they do from the F10 bar, and the two stay in step.

While the panel is open, and until every button has been released after it closes, the game sees the VR controllers idle: no buttons, no pointer and a remote at rest. Nothing reaches the game from the chord, the trigger that clicked Close, or the menu press that closed the panel. The game is not paused, so a race carries on while you change settings. Other controllers (keyboard, desktop gamepads, Bluetooth remotes) are not affected.

The panel sits centred on the virtual screen, three quarters of its width across (1.8 m with the default hud_width_meters). On a menu that is the anchored menu quad; in a race it is the 2D layer's screen, hud_distance_meters ahead of the latched race origin and turned by the lean-back angle, whether or not hud_virtual_screen places the HUD there. Recenter view brings both back in front of you.

How it is drawn: settings_overlay.cpp builds the panel with a second Dear ImGui context of its own, a 1440 × 1080 canvas at twice the desktop menu's scale with its own font atlas, fed by the pointer that openxr_input.cpp publishes through vr/openxr_settings_panel.h. Aurora renders that draw data into a panel texture once per sealed frame and lays it over each eye after the eye is finished (aurora-main/lib/stereo_overlay.cpp): through the eye's frustum and viewFromCenter onto the screen rectangle for an immersive eye (including headset-rate interpolated eyes, which reuse the texture), and as a centred rectangle on a virtual-screen eye image. The eye images the OpenXR backends already submit carry it, so no extra swapchain or composition layer is involved. The ImGui backend keeps a single projection uniform, so the panel's pass is submitted on its own command buffer before the desktop's ImGui pass of the same frame is recorded.

mkw_vr_settings_panel_tests covers the chord, the release latch, selection, scrolling and the canvas mapping; gx_fifo_tests covers where the panel lands in each eye.

The first-person camera

By default the headset sits where Mario Kart's own chase camera sits, and world_units_per_meter of 500 presents the race as a small diorama on a table. Turning on first_person moves the camera to the local driver's head instead, and switches the world scale to first_person_units_per_meter, whose default of 30 is what makes the race read life-size from the seat. It is a matter of taste rather than a property of the game, so the F10 bar exposes it.

The kart is selected through the game's local-screen-to-racer mapping, including online races where your racer is not slot zero. First person requires a locally controlled racer; spectating another racer keeps the game's own camera.

The game's own transforms are never modified. Each guest frame the runtime reads the race camera's view matrix and the player kart's physics pose and derives one affine transform from the recorded view space into the space to render from. That transform is published with the sealed frame, and the renderer composes it onto every perspective draw's model-view matrix, alongside the headset's own per-eye delta. The kart's physics pose is used deliberately, not the animated model: an animated frame would bob and lurch the camera.

first_person_rotation decides where the view's orientation comes from, mirroring DolphinXR's camera-anchor modes. "yaw", the default, keeps the horizon level through a chase-camera tilt or a banked corner. "yaw_pitch" adds the kart's climb, so a slope or a wheelie tips the view while a banked corner still never rolls it. "full" takes the kart's whole orientation, banking included. All three are the same construction from a forward and an up axis, differing only in which pair they take: pairing a forward with world up is what removes roll. The headset always adds free look on top of whichever is chosen, and only the translation onto the head is common to all three.

The head's place in the kart is first_person_head_up_meters and its two companions, measured in the kart's own frame; the F10 sliders exist because the comfortable value is a matter of taste and is best judged from inside the headset.

The mode engages only in a single-screen race, the same content that already qualifies for immersive stereo. Menus, split-screen, and the virtual-screen fallback are unaffected, and so is the desktop mirror, which keeps showing the game's ordinary third-person view. If the kart or camera cannot be read the camera stays where the game put it rather than guessing.

Your own driver sits exactly where your eyes are, so their head would fill the view. first_person_hide_driver removes it. The game applies one draw byte across every model of a kart and to its body, so clearing it outright takes the vehicle along with the driver; first_person_hidden_model names a single model to hide instead. On PAL RMCP01 a kart carries two models and index 0 is the driver, which is the default: the character goes and the vehicle stays. -1 restores the blunt behaviour and hides everything. An index the kart does not have hides nothing, and the log reports how many it has when the mode engages. The F10 bar presents this as two toggles, "Hide driver" and "Hide driver and kart", alongside a button that restores every first-person default. Both settings touch your own kart only, so the other racers are untouched, and the original values are restored when first person stops or the race ends. This is the one place the first-person camera modifies the game rather than only reading it.

One limitation is worth knowing: Mario Kart still culls the scene from its own chase camera, so a wide head turn in first person can reveal the edge of what the game decided to draw. As with the rest of the race instrumentation, the object offsets this reads are specific to the project's supported PAL RMCP01 translation.

Presentation policy

The runtime deliberately fails safe instead of guessing which Mario Kart camera is active:

• Menus, loading screens, unclassified scenes, and multiplayer render on a head-locked virtual screen.
• A PAL RMCP01 race scene switches to immersive stereo only after translated-code observers confirm exactly one distinct race camera for the current GX frame.
• Leaving the race or observing zero or multiple cameras immediately returns presentation to the virtual screen. Session/runtime loss safely tears down XR and continues on the desktop mirror.

Aurora records the original GX frame once and replays it for both OpenXR eyes. Perspective GX draws receive asymmetric headset projections, while the game's 2D layer goes on a fixed virtual screen (see below). Menus and unsafe whole scenes use the virtual-screen path. Head pose is sampled by the OpenXR pacing thread, while Aurora's frame worker consumes a short-lived immutable stereo packet. Each sealed GX frame and immersive packet carry the same policy-generation tag; a mismatch is rendered in mono and the acquired XR frame is canceled, so an asynchronous menu/race transition cannot replay race transforms over unsafe content.

With VR interpolation enabled, Aurora retains each sealed race's command stream and matched previous/current transform uniforms. New OpenXR packets wake the frame worker between game frames. It interpolates at the requested display time, then applies that packet's head pose and the scene anchor to both eyes. Native offscreen effects and the 2D HUD retain their game-frame updates. A mid-frame EFB readback invalidates retained GPU data; a policy-tag mismatch rejects the replay. Missing matches use current transforms, and stalls clamp at the last known pose instead of extrapolating. The ordinary desktop interpolation settings remain independent.

The D3D12 pacing thread retains the last completed projection or virtual-screen layer and resubmits it during stalls, including while moving the desktop window, pausing, or minimizing. The scene freezes until rendering resumes; the compositor can still reproject the retained image for head movement. Repeated layers keep their original render poses and field of view, paired with the new compositor display time. Two pairs of eye swapchains keep the retained image separate from pending or canceled rendering (at the cost of additional GPU memory). Unencoded packets can be withdrawn after 50 ms; encoded work retains its images while the pacing thread continues submitting the last completed layer. A stall alone no longer requests desktop fallback after 250 ms.

Before the first valid image, when OpenXR requests no rendering, or after a session/reference-space change invalidates the retained content, frames can still have no layers. Actual runtime or GPU submission failures retain the safe teardown path. This does not detect black images rendered by the game itself, and cannot keep submitting if the entire process or XR runtime is suspended. All OpenXR session and swapchain calls remain on their owning thread.

The race's 2D layer

The minimap, race position, item roulette, lap times and the rest of the game's orthographic layer would otherwise be stretched across each eye's entire field of view. With hud_virtual_screen on they are instead placed on a rectangle fixed in the recorded camera's own frame, hud_distance_meters ahead of it and hud_width_meters across, its height following the aspect ratio the game is presenting at. The screen stays where the camera puts it, so looking around moves the view across it rather than dragging it along.

An orthographic GX projection is affine, so the draw's clip position is already its position on the flat frame. Replay folds three further steps into that same projection matrix, one per eye: the draw viewport into full-frame coordinates, the frame position onto the screen rectangle, and the screen through that eye's view and OpenXR frustum. The draw's own position matrices are left alone.

Depth uses the equivalent of DolphinXR's Exact Screen Depth path. A replay-only shader variant carries the draw's original GX depth through a flat-interpolated value and explicitly writes it at the fragment, including the draw's recorded viewport depth range. The reprojected geometry itself is parked at mid-depth for clipping. This avoids the view-dependent perspective-divide rounding that otherwise breaks equal-depth LEQUAL ordering and causes overlapping menu/HUD elements to z-fight.

Two classes of draw are deliberately left on their recorded transforms: native framebuffer effects (bloom and the rest of the post-processing chain, recognised by sampling a freshly produced, reduced or blended-back EFB copy), which belong to the rendered image rather than to the game's 2D layer, and any draw whose matrix is not actually affine. Retained one-shot EFB bakes such as Mario Kart Wii's minimap are treated as game art and remain eligible for the screen. A reprojected 2D draw uses the full eye viewport and scissor because its recorded rectangle no longer describes where it ended up; its original viewport is folded into the projection instead.

Diagnostics

F10 > Diagnostics holds two bug-report aids.

OpenXR diagnostic logging is off by default. When it is off, each hook on the pacing thread is one atomic test. It applies immediately and is remembered as:

[diagnostics]
openxr_logging = false

When it is on, console.log receives lines tagged [runtime] [xr-diag] (runtime/src/vr/openxr_diagnostics.cpp). They cover both the D3D12 and the Vulkan backend.

• Session description. Written when logging starts and again for every new OpenXR session. It gives the runtime and system names and versions, vendor id, tracking support, backend, reference space, blend mode, enabled extensions, recommended and maximum eye sizes, render_scale, swapchain sizes, display period, and the VR frame interpolation setting.
• View geometry. Written on the first located views and again whenever they change by more than 0.5° or 0.5 mm. It gives per-eye FOV half-angles, the eye cant (the angle between the two eyes' forward axes: 0 for parallel displays, non-zero for canted ones such as Pimax without parallel projections), and the IPD.
• A one-second summary. Timings are median/worst in milliseconds; for end-margin, worst is the minimum.

Field	Meaning
Hz, cycles	Display rate from the predicted display period; compositor cycles (xrWaitFrame/xrEndFrame pairs, repeats included).
skipped-slots	Display slots the predicted display time jumped over: the runtime throttled or dropped frames.
late	Frames whose xrEndFrame came after their predicted display time (needs XR_KHR_win32_convert_performance_counter_time or XR_KHR_convert_timespec_time).
layers new/repeat/empty	Cycles ending with a newly rendered layer, the retained layer again, or no layer at all (black).
discarded, layer-rejected	Retained layers dropped by a session or reference-space change; rendered layers not submitted (invalid pose or views, failed release).
wait-frame, open, end-call	Time blocked in xrWaitFrame, from xrBeginFrame to xrEndFrame, and inside xrEndFrame.
end-margin, end-gap	Predicted display time minus the xrEndFrame time; interval between xrEndFrame calls.
pickup, render	Stereo packet published until Aurora's frame worker takes it (without interpolation this includes waiting for the next 60 Hz game frame); taken until the eye copy is submitted.
acquire, release	Swapchain image acquire+wait and release.
keepalive	Retained-layer repeats while Aurora was still encoding past the 50 ms keep-alive.
packet-unused, packet-rejected, submit-failed	Packets no game frame took within 50 ms; packets Aurora took but rendered mono (content tag or transform check); failed stereo copies.
interp-skip	Cycles the VR interpolation rate cap chose not to render.
frames immersive/screen	Cycles per presentation mode; not-rendered counts cycles without views to render.
no-orientation, no-position	Cycles whose head orientation or position was not valid.
suppressed	Event lines dropped by the rate limit.

• Event lines. At most 8 per second; the rest are counted in suppressed. They report late frames, skipped display slots, stalls (more than 2.5 display periods, and at least 25 ms, between xrEndFrame calls), empty frames and their reason, discarded retained layers, rejected layers, withdrawn or rejected packets, failed submissions, and head-tracking loss and recovery. Reference-space change events are never rate-limited.
• Presentation changes. While logging is on, every [mkw-vr] presentation= transition is logged, not just the first 16.

Export Logs opens the system folder picker. It then creates a WiiCompiled-logs-YYYYMMDD-HHMMSS folder at the chosen location, containing:

• Logs/: every retained run folder, the current session included. The runtime prunes run folders after four days.
• Config.toml.
• export-info.txt: the export time, the exporting process id (whose run folder ends in _pid<id>), and the OpenXR state.

The current console.log is copied through a shared-read stream while it is still being written. The copy runs on SDL's dialog thread (runtime/src/log_export.cpp), and the outcome is shown under the button. mkw_openxr_diagnostics_tests and mkw_log_export_tests cover both without a headset.

Backend status

Backend	Status
Windows D3D12	Implemented: same-adapter, same-device asynchronous OpenXR submission.
Android Vulkan (Meta Quest)	Implemented and running on a Quest 3: the OpenXR side owns its own Vulkan device (XR_KHR_vulkan_enable2, XR_KHR_vulkan_enable fallback) and shares eyes with Dawn through AHardwareBuffers ordered by sync-fd fences. Controllers arrive through OpenXR actions as a virtual SDL gamepad. See docs/quest-port.md.
Linux Vulkan	Not wired. The pinned Dawn package does not expose a native Vulkan device, and the AHardwareBuffer bridge is Android-only; a dma-buf/opaque-fd variant of the same design would cover desktop Linux.
Other platforms	Not wired yet.

Both bindings share openxr_integration.cpp: the pacing thread, policy evaluation, the retained-layer protocol and the head-pose maths are compiled once against the neutral types in vr/openxr_backend.h, and only the backend class differs per platform.

Interpolation validation

Probe-sized EFB readbacks retain completed pixels in host memory and publish them only inside the next compatible GXCopyTex call. GPU completion callbacks must not write to guest RAM: a race restart can reuse a freed probe buffer for RaceCamera, and a late 4x4 Z24X8 tile then turns its rotation fields into NaNs and triggers triangular.h / PPCHalt. The optional Windows GPU test efb_ram_lifetime_smoke exercises that allocation reuse and format/size changes. It fails with the former callback write and passes with deferred publication.

The GX tests cover retained transform endpoints with desktop interpolation off and continuous sampling at 72/90/120 Hz. mkw_frame_interpolation_pacing_tests covers fixed-rate scheduling, live changes, stalls and configuration migration; mkw_openxr_replay_tests exercises swapchain ownership and retained-layer submission without a headset.

For a Windows GPU check, configure Aurora with its tests enabled and AURORA_GPU_SMOKE_TESTS=ON, then build/run stereo_frame_worker_smoke. This feeds the actual renderer a 60 Hz GX stream and an independent 90 Hz stereo provider. The development check produced 359 new stereo submissions in 4 seconds (89.7 FPS). This verifies submission cadence, not full-race performance or visual quality on a headset. Pass a draw count, for example stereo_frame_worker_smoke 2000, to stress uniform preparation and renderer/producer overlap; stereo_frame_worker_smoke 2000 0 checks native stereo with interpolation Off. Use stereo_frame_worker_smoke 1000 1 1 to exercise ten-matrix palettes and their larger uniform history, or stereo_frame_worker_smoke 1000 2 1 to switch interpolation On/Off during recording. The test compositor discards obsolete ticks and uses high-resolution waits on Windows, keeping missed ticks from accumulating into bursts. It pre-warms the next game frame like the runtime and excludes the first 60 frames from timing so shader compilation and initial resource allocation do not skew steady-state results. The test checks that the producer stays above 55 FPS as well as checking headset submissions; replaying an old scene more often must not hide a slowed simulation. Validate actual races in VDXR at 90 Hz with Auto/90 selected, including race entry/exit, first person, recentering and pauses.

Stereo uniform calculations use cached CPU memory, followed by a single write into the upload buffer. Reading or modifying matrices directly in D3D12 upload memory can be extremely slow, especially with many character draws; see Microsoft's Map guidance. Retained interpolation reserves eye ranges at seal time and fills them once at the headset sample time. VR interpolation also releases the producer after sealing so eye encoding can overlap the next game frame, as it does with desktop interpolation.

When VR interpolation is enabled at batch start, uniform recording also uses cached CPU memory. Matching and history capture read that buffer, then the used prefix is copied to the mapped upload buffer before unmapping. The backing choice stays fixed until the batch ends, including mid-frame flushes, so live setting changes cannot invalidate pending tasks.

Current limitations

• Only the project's supported PAL RMCP01 translation has race instrumentation addresses.
• The tracked controllers are always Player 1's Wii Remote; there is no left-handed swap, and only the Touch and simple controller profiles have suggested bindings. The Wii Remote presentation still needs headset validation: cursor direction and roll, trick/wheelie motion, rumble strength and the HOME Menu.
• The Quest build (android/, docs/quest-port.md) runs on a Quest 3 through menus and races. Lifecycle events and performance (about 43 game FPS) are still open. Apple visionOS packaging is not implemented.
• Scene-specific comfort options, culling fixes and replay/spectator classification are future work.
• The headset settings panel is drawn into the eye images rather than submitted as its own quad layer, so its text is resampled once more than a compositor layer's would be. It has no laser beam, only the cursor on the panel itself, and text fields cannot be typed into without a keyboard.
• The desktop window remains available as a mirror/fallback.

OpenXR diagnostics are written to the normal run log under %LOCALAPPDATA%\WiiCompiled\Logs. Search for OpenXR when reporting a startup or submission failure.