steam-frame-nix

Home Manager modules for the Valve Steam Frame: SteamOS on aarch64-linux, standalone home-manager on a non-NixOS system. They work around quirks of the Frame's two graphical sessions (portal config, keyboard layout, VR keyboard, clipboard, Firefox) declaratively, so every change can be reverted by activating an older home-manager generation.

All options live under steamFrame.*. The portal fix and clipboard sync are on by default; everything else is opt-in.

Install

On the Frame (or a Steam Deck), open a terminal (Konsole in the desktop mode / nested desktop) and run:

curl -fsSL https://raw.githubusercontent.com/lhns/steam-frame-nix/main/install.sh | bash -s -- install

sudo needs a password: if you never set one, run passwd first.

What it does:

1. Installs Nix with the NixOS nix-installer (steam-deck planner: the store lives in /home/nix, which survives SteamOS updates; flakes enabled). The read-only root filesystem is unlocked only for the installation. Skipped if Nix already works.
2. Uses the Home Manager configuration in ~/.config/home-manager, or --flake <dir-or-flakeref>. If there is none, it creates one in ~/nix-config from this repo's template (a git repo, linked to ~/.config/home-manager) with your user name filled in.
3. Activates it (home-manager switch); existing dotfiles that conflict are renamed to *.hm-backup-<time>.

Re-running it just switches again. Afterwards, edit ~/nix-config/home.nix and apply it with home-manager switch from a terminal in the nested desktop.

# status: Nix, Home Manager generation, steam-frame-nix services
curl -fsSL https://raw.githubusercontent.com/lhns/steam-frame-nix/main/install.sh | bash -s -- status

# uninstall Home Manager and Nix (--keep-nix keeps Nix)
curl -fsSL https://raw.githubusercontent.com/lhns/steam-frame-nix/main/install.sh | bash -s -- uninstall

The uninstaller first stops the user services Home Manager installed (which also reverts the Steam keyboard patch), runs home-manager uninstall, then removes Nix and per-user Nix state. Your configuration directory, *.hm-backup-<time> files, app data (e.g. ~/.local/share/docker) and Flatpak apps are left alone.

For a manual setup, start a configuration from the template:

nix flake init -t github:lhns/steam-frame-nix

Two sessions

The Frame runs two graphical sessions at once, and most of the workarounds below exist because of the difference between them:

	Steam / VR session	Nested Plasma desktop
Compositor	gamescope	KWin (nested, shown as a VR window)
Displays	X display :0 (apps show as floating VR windows)	own Wayland + Xwayland :2
D-Bus	the outer session bus, /run/user/1000/bus	a private bus
XDG_RUNTIME_DIR	/run/user/1000	its own
systemd user manager	yes	not reachable

Consequences:

• Wallet: there should be exactly one kwalletd6, on the outer bus. Apps started from the desktop would otherwise start a second wallet on the private bus, and secrets saved there are invisible in VR. Launchers can prefix their Exec= line with steamFrame.outerBusEnv (env DBUS_SESSION_BUS_ADDRESS=<outer bus>).
• User services: home-manager's own reloadSystemd step is skipped when switching from the desktop terminal (wrong XDG_RUNTIME_DIR), so steamFrame.userServices talks to the outer user manager directly.
• Launchers: the Steam session's "+" menu only sees ~/.local/share/applications (not ~/.nix-profile/share), so app entries are written there, shadowing Flatpak/package entries under the same ID.

Usage

Requirements: Nix with flakes enabled and standalone home-manager (see Install; nix flake init -t github:lhns/steam-frame-nix creates the two files below).

# flake.nix
{
  inputs = {
    nixpkgs.url = "github:NixOS/nixpkgs/nixos-unstable";
    home-manager = {
      url = "github:nix-community/home-manager";
      inputs.nixpkgs.follows = "nixpkgs";
    };
    steam-frame-nix = {
      url = "github:lhns/steam-frame-nix";
      inputs.nixpkgs.follows = "nixpkgs";
    };
  };

  outputs = { nixpkgs, home-manager, steam-frame-nix, ... }: {
    homeConfigurations.steamos = home-manager.lib.homeManagerConfiguration {
      pkgs = nixpkgs.legacyPackages.aarch64-linux;
      modules = [ steam-frame-nix.homeManagerModules.default ./home.nix ];
    };
  };
}

# home.nix
{ config, ... }: {
  home.username = "steamos";
  home.homeDirectory = "/home/steamos";
  home.stateVersion = "25.11";
  targets.genericLinux.enable = true;

  steamFrame = {
    keyboardLayout = "de";
    steamKeyboardPatch.enable = true;
    firefox.enable = true;
    # Only relevant with Steam Developer Mode on (see hidden-apps below).
    hiddenApps = [ "lxterminal" "cmake-gui" "firewall-config" "renderdoc" ];
  };

  # Example: an app that must use the single wallet on the outer bus.
  # xdg.dataFile."applications/org.example.App.desktop".text = ''
  #   [Desktop Entry]
  #   Type=Application
  #   Name=Example
  #   Exec=${config.steamFrame.outerBusEnv} flatpak run org.example.App %U
  # '';
}

Switch from a terminal in the nested desktop (clipboard-sync is restarted with the desktop's environment):

home-manager switch --flake .#steamos

Individual modules are available as homeManagerModules.{session,portal,keyboard-layout,steam-keyboard-patch,hidden-apps,clipboard-sync,firefox}; default imports all of them.

Steam Developer Mode (a Steam setting, not managed here) makes the "+" menu list every desktop entry, including terminals such as Konsole.

Options

Option	Type	Default	Description
steamFrame.runtimeDir	str	"/run/user/1000"	XDG_RUNTIME_DIR of the outer (Steam/VR) session.
steamFrame.userBus	str	"unix:path=${runtimeDir}/bus"	Outer session D-Bus (user manager, the one kwalletd6).
steamFrame.outerBusEnv	str, read-only	"env DBUS_SESSION_BUS_ADDRESS=${userBus}"	Prefix for launchers that must use the outer bus.
steamFrame.userServices.start	list of str	[ ]	User units started on switch if not running (outer user manager).
steamFrame.userServices.restart	list of str	[ ]	User units restarted on every switch (outer user manager).
steamFrame.userServices.stop	list of str	[ ]	User units stopped on switch if still running, e.g. of a feature just disabled.
steamFrame.portalFix.enable	bool	true	Working portal config for the Steam session (OpenURI).
steamFrame.keyboardLayout	null or str	null	XKB layout for the Steam session, e.g. "de". null = no drop-in (US).
steamFrame.keyboardVariant	null or str	null	XKB variant for the Steam session.
steamFrame.steamKeyboardPatch.enable	bool	false	Runtime patch of Steam's on-screen keyboard: Esc/Ctrl/Alt, separate arrows, real Ctrl/Alt chords and hold, AltGr/non-ASCII characters.
steamFrame.hiddenApps	list of str	[ ]	Desktop entry ids (without .desktop) to hide from the "+" and KDE menus.
steamFrame.clipboardSync.enable	bool	true	Clipboard bridge between the Steam session and the nested desktop.
steamFrame.clipboardSync.package	package	built from dnut/clipboard-sync	The clipboard-sync package.
steamFrame.firefox.enable	bool	false	Launcher for the Flathub Firefox Flatpak (org.mozilla.firefox) with the fixes below.
steamFrame.firefox.vrFullscreenFix	bool	true	Link a user.js with full-screen-api.ignore-widgets into existing profiles.
steamFrame.firefox.desktopProfile	null or str	"desktop"	Separate profile used in the nested desktop; null disables it.

Fixes in detail

Session settings and background services (session.nix)

This module is used by the others; you normally don't set anything here.

Where things live. Background services (systemd user services) and the KDE wallet belong to the Steam session. The nested desktop runs separately and can't see them. runtimeDir and userBus point at the Steam session's runtime directory and message bus, and outerBusEnv is a ready-made prefix for launchers that must reach them, e.g. Exec=${config.steamFrame.outerBusEnv} flatpak run ….

Starting services on switch. When you run home-manager switch from a terminal in the nested desktop, Home Manager can't reach the service manager, prints "User systemd daemon not running" and skips starting or restarting services. So after every switch this module talks to the Steam session's service manager directly: it reloads the service files, then starts the services listed in userServices.start, stops the ones in userServices.stop and restarts the ones in userServices.restart. Other modules fill these lists (e.g. the keyboard patch restarts its helper so a new version takes effect).

Portal (portalFix)

Problem: the Steam Frame image (SteamOS 0.3.0, build 20260922) points the Steam session's xdg-desktop-portal at /usr/share/xdg-desktop-portal/gamescope-portals, which has the holo and gamescope backends but no gamescope-portals.conf. With XDG_DESKTOP_PORTAL_DIR set, the portal reads config only from there, selects no backend and offers no OpenURI: no app in the Steam session can open links.

Fix: an own portal dir in ~/.local/share with links to Valve's .portal files plus a config (default=holo;gamescope), and a drop-in on xdg-desktop-portal.service pointing at it. Only the systemd-managed (outer) portal is affected; the desktop's portal keeps kde-portals.conf.

Remove when SteamOS ships a gamescope-portals.conf (steamFrame.portalFix.enable = false).

Keyboard layout (keyboardLayout, keyboardVariant)

Problem: gamescope and its Xwayland displays use xkbcommon defaults (US) unless XKB_DEFAULT_* is set; KDE's layout setting only affects the nested desktop. ~/.config/environment.d isn't read by the user manager on the Frame.

Fix: a drop-in on gamescope-session.service setting XKB_DEFAULT_LAYOUT (and XKB_DEFAULT_VARIANT). Takes effect the next time the Steam session starts.

Remove when SteamOS applies a layout setting to gamescope.

Steam keyboard patch (steamKeyboardPatch.enable)

Problem: Steam's VR keyboard has hardcoded layouts without Ctrl, Alt or Esc. In VR, Steam can't press real keys (SteamClient.Input.ControllerKeyboardSetKeyState throws "Unknown method"), and its text emulation (ControllerKeyboardSendText) only maps plain ASCII: non-ASCII characters and anything needing AltGr or a dead key on the German keymap (| @ { [ ] } \ ~ ^, backtick, ä ö ü €) come out as 1.

Fix: the steam-keyboard-patch user service (helper.mjs, Node) injects patch.js into Steam's UI at runtime through Steam's CEF DevTools port (127.0.0.1:8080; SteamOS starts Steam with -cef-enable-debugging) and re-injects it after Steam restarts or the keyboard popup is recreated. Steam's files are never modified. Enabling and disabling take effect on home-manager switch, no reboot or Steam restart needed: when the helper stops (service stopped, or the option disabled, which stops it via userServices.stop) it reverts the patch in Steam's running UI (unpatch.js). The service is restarted on every switch (via userServices.restart) so a changed patch is re-injected.

• Bottom row becomes Esc Ctrl Alt [Space] AltGr ← ↑ ↓ → Close. It stays stable with Shift or AltGr active (Steam's stock bottom row moves the close icon with Shift and breaks apart with AltGr).
• AltGr + arrows: ← Pos1 (Home), → Ende (End), ↑ Bild↑ (Page Up), ↓ Bild↓ (Page Down), shown as small hints on the arrow keys. Shift + arrows send real Shift+arrow, for selecting text.
• Ctrl/Alt chords and Esc are pressed with xdotool key on :0, where X focus follows the window selected in VR.
• While Ctrl/Alt is toggled and the keyboard is open, the real modifier is held down (e.g. Ctrl+scroll to zoom).
• Problem characters are typed with xdotool type; everything else still goes through Steam.
• Enter always types Return in app windows. Stock Steam keeps the last focused Steam search box as the keyboard target, so Enter could be labelled "Search" and close the keyboard instead of pressing Return.

Layouts: the extra-character handling (which characters are routed to xdotool, and the keysym names used for umlauts in chords) targets the German (de) keymap. On other layouts it is harmless: those characters are simply typed by xdotool instead of Steam, and Esc/Ctrl/Alt/arrows work regardless.

Security: requests come from Steam's UI JS, so the helper uses an allowlist: Ctrl/Alt chords with a single key, the extra keys (Esc, Del, Home, End, Page Up/Down, arrows), hold/release of Ctrl/Alt, and single non-ASCII or AltGr characters. It cannot type plain ASCII text or press Enter on its own.

Caveat: the patch depends on Steam UI internals, including internal webpack module ids (e.g. 40222 for layouts, 5363 for the keyboard manager). A Steam update can break it; the keys then just don't appear. Tested with Steam client 1790377368.

Remove when Steam's VR keyboard gets these keys itself.

Hidden apps (hiddenApps)

Problem: with Steam Developer Mode on, the "+" menu lists every desktop entry GLib would show, including system tools you never want in VR.

Fix: a user entry with Hidden=true in ~/.local/share/applications masks the system one (also in the KDE menu).

The "+" menu itself always hides executables named steam or vrurlhandler, and unless Developer Mode is on also terminals and similar tools such as konsole, dolphin, vlc, sh and lxterminal (filter in Steam's UI JS). Enable Developer Mode to get Konsole in VR.

Clipboard sync (clipboardSync.enable)

Problem: the Steam session's X displays and the nested desktop have separate clipboards.

Fix: clipboard-sync, built from source with your pkgs (its own flake outputs are x86-only). Started via KDE autostart (phase 2), not systemd: the desktop can't reach the user manager and :2 must exist first. Each switch restarts it if the running binary isn't the current build, so run home-manager switch from a desktop terminal.

Firefox (firefox.*)

Assumes the Flathub Firefox Flatpak (org.mozilla.firefox, stable branch). The launcher's desktop entry shadows the Flatpak's own (same ID), so default-browser associations for org.mozilla.firefox.desktop keep working.

• vrFullscreenFix: real fullscreen is broken in the Steam session: gamescope focuses the fullscreen window but never shows it, so Firefox looks frozen. A user.js with full-screen-api.ignore-widgets makes fullscreen fill only the Firefox window, which in VR can be as large as you like. It is linked into every existing profile on each switch (existing non-symlink user.js files are left alone). Remove when gamescope shows fullscreen X11 windows in VR.
• desktopProfile: the two sessions can't see each other's running Firefox, so a second instance stops at the locked profile. In the nested desktop (XDG_CURRENT_DESKTOP=KDE) the launcher uses a separate profile (without the user.js; fullscreen works there).

Rollback

home-manager generations lists previous generations; run the activate script of the one you want (<store path>/activate).