When a guest executable is invoked through two or more levels of symlink,
FEX expands $ORIGIN in its DT_RPATH/DT_RUNPATH to the directory of the
intermediate symlink rather than the directory of the fully-resolved binary.
Libraries referenced relative to $ORIGIN then fail to load.
This PR fixes the issue by continuously chasing the symlinks until we find
the actual executable name.
As long as the hash is smaller than 64-bits we can just return the bits
encoded directly. Codegen slightly changes with this packed
representation, but doesn't really matter.
Also removes ICacheLineSize as that doesn't actually affect codegen for
us. Once we add 27 more HostFeatures we can switch the hash over to
XXH3.
Serializes code blocks to disk - only blocks coming from known regions, for now
Disabled by default, key and versioning still needs work, but works for testing
We really don't want to do this, but in the case that the AF_UNIX path
is longer than the 108-byte limit that sun_path provides we don't really
have a choice. The alternative choice would be to switch /entirely/ away
from AF_UNIX and instead use pipes. We need a bandage fix for now, so
throw the socket in to a temp folder if the path is too long.
Because these compile options change codegen, we need to make sure these
are runtime selected rather than compile-time selected. Will reduce
code-cache variance.
If the simulator was selected, we would still capture CTR and MIDR on
the host AArch64 system. Potentially modifying codegen in unexpected
ways.
Ensure we return 0/0 like under x86 with simulator to simulate
"unknown".
This optimization was only written for Ampere1A where it showed a
noticable performance improvement in #5321. On Cortex it didn't matter.
Turns out this actually hits a bad case on Oryon CPUs where `dc zva` is
actually dramatically slower in the face of memory barriers and
overlapping stores in flight.
So now just detect Ampere and only use the optimization on that hardware
and send everyone else down the regular path.
microbench A1A:
```
Cycle counter frequency: 1000000000
Cycle counter granularity: 20
ns in cycle: 1
suite: memory
Test, Total Cycles, Iterations, Cycles Average, Iter Time Average, iterations/Second
dc zva - vzeroupper, 723390880, 363855872, 1.99, 1.99 nanosecond, 502986534.75
dc zva - vzeroall, 571708060, 161742848, 3.53, 3.53 nanosecond, 282911610.52
dc zva (stp emu) - vzeroupper, 541543980, 107872256, 5.02, 5.02 nanosecond, 199193897.42
dc zva (stp emu) - vzeroall, 722548940, 71958528, 10.04, 10.04 nanosecond, 99589832.63
```
microbench X2E:
```
Cycle counter frequency: 19200000
Cycle counter granularity: 1
ns in cycle: 52.083333333333336
suite: memory
Test, Total Cycles, Iterations, Cycles Average, Iter Time Average, iterations/Second
dc zva - memset 0, 12065162, 49, 246227.80, 12.82 millisecond, 77.98
dc zva - vzeroupper, 12098598, 4325376, 2.80, 145.68 nanosecond, 6864201.89
dc zva - vzeroall, 12031459, 4325376, 2.78, 144.87 nanosecond, 6902506.11
dc zva (stp emu) - vzeroupper, 13899441, 363855872, 0.04, 1.99 nanosecond, 502612496.60
dc zva (stp emu) - vzeroall, 12389283, 161742848, 0.08, 3.99 nanosecond, 250657175.37
```
- RNDRRS is still broken on this CPU
- Fault granularity checking needs to use loads
- stlxp does monitor check before alignment check, use loads for all
for consistency
- Fault granularity is still 16B which matches LSE2 requirements.
- X2E still only ships a 19.2Mhz cycle counter, so still only
ARMv9.0-a hardware
- Adds product name to CPUID
- Oryon-3 being CPU PartID 2 isn't a mistake.
- No distinction between Oryon-1 and Oryon-2, both are partid 1.
cpuinfo:
```
processor : 0
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm jscvt fcma lrcpc dcpop sha3 sm3 sm4 asimddp sha512 sve asimdfhm uscat ilrcpc flagm ssbs sb paca pacg dcpodp sve2 sveaes svesha3 svesm4 flagm2 frint svei8mm svebf16 i8mm bf16 rng ecv afp rpres
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x1
CPU part : 0x002
CPU revision : 1
```
This wasn't quite wired up exactly how we wanted it. It was previously
matching against the opaque file config handle, which can be anything.
Instead compare it to the appname that now gets passed over to it for
matching.
This allows us to do the following:
```
{
"Config": {
"ProfileStats": "1",
"X87ReducedPrecision": "1",
"TSOEnabled": "1",
"VectorTSOEnabled": "0",
"MemcpySetTSOEnabled": "0",
"HalfBarrierTSOEnabled":"1",
"MaxInst": "500",
"Multiblock": "1"
},
"AppOverrides" : {
"setup*" : {
"Comment": [
"292030 - The Witcher 3: Wild Hunt"
],
"X87ReducedPrecision": "0"
}
}
}
```
Based on #121 which needs to get merged first.
Code Review
Code Review: Class deletion
Add support for question mark and plus mark in regex, supply testing for star
Added more characters to the regex alphabets, add more test case
Added support for regex matching of configs, awaiting reviews
Rename variable to CamelCase
Addresses PR reviews
Remove unnecessary features and test cases
Rewrite to naive regex with dp
Addresses PR reviews
Build fixes
Code Review
Fixes b4a87d8c0b
`FEX_APP_CONFIG_LOCATION` wasn't overriding paths properly anymore once
that commit landed. Instead legacy `~/.fex-emu/` path would get returned
if it existed first.
Ensures that it returns first, before `STEAM_COMPAT_DATA_PATH` even.
Uses ALIAS targets to propagate include directories to targets rather
than polluting the preprocessor with an extra include directory it
usually doesn't need.
Signed-off-by: crueter <crueter@eden-emu.dev>
Previously, FEX would use `$HOME/.fex-emu` for its data and config if
`XDG_CONFIG_HOME` and/or `XDG_DATA_HOME` were unset. This doesn't follow
XDG, so instead we do a fallback to `$HOME/.config` and
`$HOME/.local/share` respectively if XDG env vars are unset. Also,
pre-emptively creates those directories since `~/.local/share` and
`~/.config` existing is technically not a guarantee if XDG dirs are unset.
Signed-off-by: crueter <crueter@eden-emu.dev>
This is fundamentally a frontend only problem, and also Linux only.
Moves it to the frontend where it belongs.
There's likely more things in Allocator.cpp that can be moved to the
frontend but this is the first thing.
NFC
I may have gotten carried away.
- I missed some stuff for end parenthesis because I accidentally
searched within project files instead of the entire directory (so some
thunk/test/windows stuff was missed), cleaned those up.
- `INTERFACE`, `PUBLIC`, `PRIVATE`, `RUNTIME`, `LIBRARY` should be on
the same line as the target name. (I should really invest in making a
style guide...)
- Some short statements were unnecessarily split across multiple
lines--cleaned those up
- Made a common `LinkerGC` module that applies gc-sections etc. to a
target in Release mode
- Usually for functions you want to have something on the first line,
e.g. `FILES`/`DIRECTORY` for install, or the target/a positional
argument, etc etc. Not always though, notably for some custom_command
calls
TODO:
- What's with the `list(APPEND LIBS...)` stuff? It's used really
inconsistently, sometimes not at all, sometimes it looks like there're
duplicates? A more thorough cleanup is in order there.
Signed-off-by: crueter <crueter@eden-emu.dev>
- Do compiler/architecture checks EARLY, don't waste time doing random
configuration stuff if the user can't even compile in the first place
- MSVC is unsupported, I assume? So add a check to disallow. There's
literally no MSVC or MSC_VER checks anywhere, so...
- Rather than using the MSVC architecture definitions, use our own
`ARCHITECTURE_arm64` et al. Hijacking existing "standard" definitions
is a very bad idea. Also makes it more readable in CMake
- Change the x86 host check to `x86|amd64`. Some systems still refer to
themselves as x86 despite being 64-bit for... reasons, and I saw one a
very long time ago that referred to it as amd64. This should
basically never come up, nor is it really relevant given that FEX is
for arm64... but it kinda annoyed me so whatever.
TODOs:
- Should we check `CMAKE_SIZEOF_VOID_P (equal) 64`? I don't think anyone
is even trying to compile this thing on armv7 or older, but might as
well? maybe?
- What's the status of *BSD, Solaris, macOS? Technically macOS does
support Wine, not sure about the others.
Signed-off-by: crueter <crueter@eden-emu.dev>
- Some CMake LSPs have aneurysms when you put the end parenthesis on a
different line. Annoying? Yes, but this is all we can really do about
it for now.
- `set`, `option`, and `message` should not have spaces before their
opening parenthesis.
Signed-off-by: crueter <crueter@eden-emu.dev>
CMake has had the `MINGW` builtin to describe MinGW targets since at
least version 3.2, so it can safely be used. This variable is also set
for the MSYS2 environments, so CLANGARM64 also correctly sets `MINGW`.
Note that this depends on https://github.com/FEX-Emu/jemalloc/pull/11.
Signed-off-by: crueter <crueter@eden-emu.dev>
Windows caches can only really work safely if they are exclusive to a
prefix due to the state for things like sharing modes that is tied to
the per-prefix wineserver and codemaps encoding prefix-local paths for
system DLLs.
Ben Niu