SRA is fundamentally about hardware registers, not stores into a
software-defined context. So, it should take a register instead of an offset.
This makes all the unaligned special cases unrepresentable (by design).
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Moves it to the hypervisor leafs.
Before:
```bash
$ FEXBash 'cat /proc/cpuinfo | grep "model name"'
model name : FEX-2404-101-gf9effcb Cortex-A78C
model name : FEX-2404-101-gf9effcb Cortex-A78C
model name : FEX-2404-101-gf9effcb Cortex-A78C
model name : FEX-2404-101-gf9effcb Cortex-A78C
model name : FEX-2404-101-gf9effcb Cortex-X1C
model name : FEX-2404-101-gf9effcb Cortex-X1C
model name : FEX-2404-101-gf9effcb Cortex-X1C
model name : FEX-2404-101-gf9effcb Cortex-X1C
```
After:
```bash
$ FEXBash 'cat /proc/cpuinfo | grep "model name"'
model name : Cortex-A78C
model name : Cortex-A78C
model name : Cortex-A78C
model name : Cortex-A78C
model name : Cortex-X1C
model name : Cortex-X1C
model name : Cortex-X1C
model name : Cortex-X1C
```
Now the FEX string is in the hypervisor functions as a leaf, so if some
utility wants the FEX version they can query that directly
Ex:
```bash
$ ./Bin/FEXInterpreter get_cpuid_fex
Maximum 4000_0001h sub-leaf: 2
We are running under FEX on host: 2
FEX version string is: 'FEX-2404-113-g820494d'
```
We were previously genrating nonsense code if the destination != source:
faddp v2.4s, v4.4s, v4.4s
faddp s2, v4.2s
The result of the first faddp is ignored, so the second merely calculates the
sum of the first 2 sources (not all 4 as needed).
The correct fix is to feed the first add into the second, regardless of the
final destination:
faddp v2.4s, v4.4s, v4.4s
faddp s2, v2.2s
Hit in an ASM test with new RA.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Instead of only enabling enhanced rep movs if software TSO is disabled,
Enable it if software tso is disabled OR memcpysettso is disabled. This
is because now we hit the fast path when memcpysettso is disabled alone
but global TSO is disabled.
Retested Hades and performance was fine in this configuration.
Found out that Far Cry uses this instruction and it is viable to use in
CPL-3. This only returns constant data but its behaviour is a little
quirky.
This instruction has a weird behaviour that the 32-bit operation does an
insert in to the 64-bit destination, which might be an Intel versus AMD
behaviour. I don't have an Intel machine available to test if that
theory is true although. This assumption would match similar behaviour
where segment registers are inserted instead of zext.
Gets the game farther but then it crashes in a `___ascii_strnicmp`
function where the arguments end up being `___ascii_strnicmp(nullptr, "Color", 5);`.
There's quite a few places where the segment offset appending is open-coded
throughout the opcode dispatcher, but we can pull these out into a few
helpers to make the sites a little more compact and declarative.
this ensures we put the StoreNZCV in the right block, which will fix validation
fails later in the series.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Rather than checking the actual EC bitmap in the dispatcher (~6 instrs), this
indirection through the code cache allows just 1 instr for the hot path
of calling repeated EC code/x64 code.
The frontend will provide the return logic via ExitFunctionEC, which
will be jumped to whenever there is an indirect branch/return to an addr
such that RtlIsEcCode(addr) returns true.
Generates flags for a variable shift as a dedicated IR op. This lets us optimize
around it (without generating control flow, relying on deferred flag infra,
etc). And it neatly solves our RA problem for shifts.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
This is something the new shift flag code will do. Backporting the opt since
that's stalled and this reduces the diff.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Alyssa Rosenzweig