Settings: HANDS_SWAP_SIDES defaults to auto, and old untouched configs move to it

frametop.conf.example said HANDS_SWAP_SIDES=0, and desktops.sh copies it on a fresh install, so every new install forced ft-camd's side camera names and turned the hand tracker's own side check off. Some SteamVR restarts swap those names, and then hands land beside their cutouts and recordings are mislabelled. The example now says auto. scripts/conf-migrate.sh, run by install.sh and hands/rec/install.sh, replaces the old line only where it's still exactly as the example wrote it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hands: label side cameras by the hands when a forced HANDS_SWAP_SIDES disagrees
2026-10-06 01:00:06 +02:00 · 2026-10-05 16:54:03 -06:00 · 2026-10-05 16:54:03 -06:00 · 2026-10-05 14:46:35 -06:00 · 2026-10-05 14:38:43 -06:00 · 2026-10-05 14:34:49 -06:00
51 changed files with 3024 additions and 142 deletions
@@ -26,7 +26,7 @@ A Steam Frame is someone's personal headset, and they may be wearing it while yo

 - Don't kill or restart `gamescope`, `steam`, `vrserver`, `vrcompositor`, the gamescope session, or the Frametop desktop without asking. Each one ends or disrupts whatever is happening in VR.
 - Don't run host `sudo`, `steamos-readonly disable`, `steamos-devmode` changes, pacman installs, or reboots without explicit approval. Three installers need host `sudo`, and they ask for it: the Bluetooth fixes (`setup/bluetooth/install.sh`), hand tracking (`hands/run.sh install` and `caps`, which set ft-camd's file capabilities with `setcap`), and our own eye tracker's frame grabber (`gaze/tracker/install.sh`).
- Write only inside the repo, `/tmp`, and the container unless told otherwise. The installers are the exception: they write the user services, launchers, and the SteamVR driver into the home folder. The Bluetooth fixes and the eye tracker's frame grabber also install root-owned files and system services under `/etc` (`/etc/steamframe`, `/etc/frametop`, `/etc/systemd/system`).
+- Write only inside the repo, `/tmp`, and the container unless told otherwise. The installers are the exception: they write the user services, launchers, and the SteamVR driver into the home folder. The Bluetooth fixes and the eye tracker's frame grabber also install root-owned files and system services under `/etc` (`/etc/steamframe`, `/etc/frametop`, `/etc/systemd/system`). When an installer starts writing something new outside the repo, add it to `uninstall.sh` too: users uninstall with that script, not with each installer's `uninstall`.
 - Never copy `.netrc`, SSH keys, or Steam config off the Frame or into this repo.

 ## SteamOS updates
@@ -57,6 +57,7 @@ If you work in the desktop for long stretches, or leave the headset on a stand,
 | While carrying a screen, sweep its laser across your other controller's ring, then let go | Pins it to that wrist, at its size and distance, as you hold it when you let go; it shows while you see its front. Grab its bar to adjust it (it stays pinned); sweep across the ring again to take it off |
 | Set a screen to On your head (Frametop Display Settings, Visibility & pins) | Pins it to your head where it is, like a HUD. Grab its bar to move it; it stays on your head |
 | Meta+Shift+R in the desktop | Puts the screens back in their layout (also in the menu as Reset Screen Layout, and mappable to a mouse button) |
+| Meta+Alt+Tab, or Meta+Alt+Shift+Tab | Spins every screen and floating window around you together, like a lazy susan, so the next one on your right (or left) glides to straight ahead, with the pointer and typing going to it. Their arrangement stays the same: the room turns instead of you. Tap again to keep going; Meta+Shift+R puts the screens back. Pinned screens stay where they are |
 | Meta+Shift+H in the desktop | Hides or shows all screens (also in the menu as Hide/Show Screens, and mappable). The Visibility & pins tab of Frametop Display Settings can instead show them only with the dashboard open, or while you look at your wrist |
 | Tap Meta, on any keyboard | Opens the Steam menu in the SteamVR dashboard, or closes the dashboard, wherever you are. The desktop's launcher is still on the taskbar and Alt+F1. Change it in Frametop Input Settings (Keyboard page), where any key combination or modifier tap can do a Frametop or Steam action, open a profile, or run a command of your own |
 | Switch a screen to Hidden (Frametop Display Settings, Visibility & pins → Screens shown) | Hides just that screen until you switch it back, whatever the other visibility settings say; new windows that would open on it float instead |
@@ -170,23 +171,22 @@ Or by hand: `cd ~/frametop && git pull && ./install.sh`.

 ## Uninstall

+In a terminal on the headset, run:
+
 ```
-./desktops.sh uninstall                # the launcher's Desktop entry goes back to the stock desktop
-./desktops.sh relay uninstall
-pointer/helper/run.sh uninstall
-power/run.sh uninstall
-pointer/driver/install.sh uninstall    # then restart SteamVR
-input-settings/install.sh uninstall
-display-settings/install.sh uninstall
-remote/install.sh uninstall
-setup/bluetooth/install.sh uninstall   # if you installed the Bluetooth fixes
-hands/run.sh uninstall                 # if you installed hand tracking by hand
-gaze/run.sh uninstall                  # if you installed the gaze service
-gaze/tracker/install.sh uninstall      # if you installed our own eye tracker's frame grabber
-gaze/probe/install.sh uninstall        # if you installed the gaze probe
+curl -fsSL https://deejanuz.github.io/frametop/uninstall.sh | bash
 ```

-Your settings stay: `~/.config/frametop.conf`, `frametop-input.json` (button maps and key combinations), `frametop-layout.json` (the layout and profiles), `frametop-float.json`, and `frametop-remote/` in `~/.config`, and the gaze calibration in `~/.local/state/frametop/gaze`. So does the desktop's own Plasma setup, in `~/.config/frametop`. Delete them too for a clean slate.
+It works in two steps, so it never takes away the keyboard, mouse, or desktop you're using while it runs:
+
+1. It stops Frametop from starting. Launch a program → Desktop opens the stock desktop again, and Frametop's services, its SteamVR driver, its menu entries, and the system files of our eye tracker and the Bluetooth fixes are removed (those need your `sudo` password). Everything running now keeps running until you restart the headset, and it offers to restart it for you.
+2. After the restart, run the same command again. It deletes the code in `~/frametop`, and asks whether to delete your settings, any eye or hand recordings, and the build container (1–2 GB) too.
+
+To see what it would do without changing anything, add `-s -- --dry-run` after `bash`. If the code isn't in `~/frametop`, add `-s -- --dir <folder>`. From the repo, the same script is `./uninstall.sh`.
+
+Don't delete `~/frametop` by hand before you uninstall and restart: the desktop and the input relay run from it, and without it Launch a program → Desktop no longer opens anything. If you've already deleted it, the command above still works, since it doesn't need the repo.
+
+Unless you ask for them to go, your settings stay: `~/.config/frametop.conf`, `frametop-input.json` (button maps and key combinations), `frametop-layout.json` (the layout and profiles), `frametop-float.json`, and `frametop-remote/` in `~/.config`, the gaze calibration in `~/.local/state/frametop`, and the desktop's own Plasma setup in `~/.config/frametop`. A later install picks them up again.

 ## How it works

@@ -196,6 +196,7 @@ A Plasma session runs nested inside ft-screens (`screens/`), a small Wayland com
 | --- | --- |
 | `get.sh` | The one-line installer: picks stable or experimental, clones or updates the repo, and runs `install.sh`. |
 | `install.sh` | The one-step installer. Safe to re-run. |
+| `uninstall.sh` | The uninstaller: run it, restart the headset, and run it again. It doesn't need the rest of the repo. |
 | `desktops.sh` | Start, stop, and configure the desktop, and install the input relay. |
 | `screens/` | ft-screens, the compositor (wlroots and OpenVR). |
 | `session/` | The desktop session script and its config example. |
@@ -3,7 +3,7 @@ Type=Application
 Name=Reset Screen Layout
 GenericName=Put the VR desktop's screens back in their layout
 Comment=Float the screens and arrange them in the layout from Frametop Display Settings
-Exec=@REPO@/layout/ft-layout apply
+Exec=@REPO@/layout/ft-layout-reset
 Icon=view-restore
 Categories=Settings;
 Keywords=display;screen;layout;arrange;reset;steamvr;frametop;
@@ -3,7 +3,7 @@ Type=Application
 Name=Hide/Show Screens
 GenericName=Hide or show the VR desktop's screens
 Comment=Hide the screens (and SteamVR's laser) for a VR game; press again to bring them back
-Exec=@REPO@/layout/ft-layout toggle
+Exec=@REPO@/layout/ft-hide-show
 Icon=view-visible
 Categories=Settings;
 Keywords=display;screen;hide;show;steamvr;frametop;
@@ -38,7 +38,7 @@ The curved layout chains screens edge to edge, like monitors on a desk: the midd

 A resize handle has to be able to shrink a screen from any direction, so the dragged corner follows the laser along the screen's diagonal rather than taking the larger of its horizontal and vertical reach. Pushing and pulling a carried screen moves it along the line from your head, because the 3D mouse's virtual controller sits just in front of the bar, below the screen's centre, so the line from the device points mostly upward.

-Wherever ft-screens needs to know where a laser points (showing the controls, the resize tab, the roll knob), it uses the laser's own pose, the render model's `tip` component, rather than the controller's pose. On the Frame's controllers the tip points 40° below the pose's forward axis, so rays from the pose missed what the laser was actually on. The 3D mouse's virtual controller has no tip, and its laser runs along its pose.
+Wherever ft-screens needs to know where a laser points (showing the controls, the resize tab, the roll knob), it uses the laser's own pose, the render model's `tip` component, rather than the controller's pose. On the Frame's controllers the tip points 40° below the pose's forward axis, so rays from the pose missed what the laser was actually on. The 3D mouse's virtual controller has no tip, and its laser runs along its pose. ft-screens reads the tip with `GetComponentState`: `GetComponentStateForDevicePath` without an input source handle fails for every component while a VR game runs, so in games the rays came from the pose, 40° too high.

 `ComputeOverlayIntersection` ignores `SetOverlayIntersectionMask`, and a control can't be allowed to cover part of its screen, so the resize tab sits entirely outside the corner.

@@ -62,7 +62,7 @@ A profile's screen part is the custom arrangement under a name: each screen's po

 `IVRApplications::GetCurrentSceneProcessId()` is 0 when no game is running (the Frame's home environment isn't a scene app) and the game's process ID while one is. ft-screens checks it twice a second, turns the flag off while a game runs, and by default hides the screens unless the dashboard is open. Flatscreen games run inside Steam's gamescope overlay and aren't scene apps, which is why "only with the dashboard open" is offered as a controller setting.

-The reset button needs to work in a game, where the screens have the flag off. So ft-screens turns the flag on for that button's overlay alone while a hand controller aims within about one button's width of it, and off half a second after the aim leaves a zone twice as wide. ft-screens finds the aim from the controllers' laser poses, which it reads anyway to show the controls, so it doesn't need SteamVR's laser to be on first. The game loses the controllers only while you aim at the button.
+In a game, Frametop's panels work like SteamVR's own floating windows: point a controller at one and its laser comes on, point away and the game has the controllers again. ft-screens turns the flag on for a panel while a hand controller's laser pose meets it, its controls, or a floating window's popups. It finds that from the poses it already reads to show the controls, so SteamVR's laser doesn't have to be on first. Leaving takes a margin two control-sizes wide and 0.3 s, a drag or a held button keeps the flag on, and the keyboard, a single overlay, uses SteamVR's `ComputeOverlayIntersection`. The 3D mouse doesn't need any of this: it has its own laser mode.

 ## Floating windows

@@ -133,7 +133,7 @@ A few overlays need special handling:

 Head follow is experimental and off by default. It works, but it's only lightly tested, and the feel is mostly a matter of its settings; polishing it is left open. With it on (`POINTER_FOLLOW=1`, or a mouse button mapped to Head follow on/off), the cursor rides on a reference direction, where you were facing when your head last settled, and keeps its offset from it. The mouse can put the cursor anywhere up to `POINTER_FOLLOW_REACH` (70 degrees) from the reference, a corner of your view included. While your head stays within `POINTER_LEASH_DEG` of the reference, nothing moves on its own. Once your head has been past the leash for `POINTER_LEASH_DELAY` (0.2 s, so a glance out and back doesn't count), the reference eases to where you're facing (time constant `POINTER_LEASH_RETURN`, 0.2 s), never falling further behind than the leash, and the cursor ends up back where it was in your view. Then it waits for the leash again. Two earlier versions didn't work out. Moving the reference only while your head pulled at the end of the leash left it up to the leash off after you turned back, and getting it centred again meant overshooting with your head. Easing it toward your facing all the time moved the cursor on every small head movement. A leash of 0 makes the reference your facing direction, so the cursor is locked to your view, and mouse movement shifts it within the view. Head roll is ignored, so tilting your head doesn't swing the cursor around. While the left button is held the cursor stays put in the room, so your head can't nudge a click or a drag. When you let go, it carries on from where it is instead of jumping.

-Gaze mode is experimental and off by default (`POINTER_GAZE=1`, the Gaze page of Frametop Input Settings, `gaze/ft-gazectl on`, or a mouse button or key combination mapped to Gaze pointer on/off). It's MAGIC pointing (Zhai, Morimoto and Ihde, 1999): the pointer goes where you look, and the mouse does the last bit. The gaze service (`gaze/ft-gazed`) sends the helper the corrected gaze at 90 Hz (from one eye while the tracker has lost the other), and while the gaze has the pointer, the cursor ray is that gaze from the eye. The pointer is aimed at the gaze each frame, not steered toward it, so nothing can pile up. An earlier try in the gaze probe steered the pointer with relative moves, and lost it when the pointer went idle or a controller had the laser. By default (`POINTER_GAZE_MOUSE_MOVE=held`, the Gaze page's Mouse movement switch) moving the mouse does nothing while the gaze has the pointer: it moves the pointer only while a button is held, as a correction. A bumped or drifting mouse can't pull the pointer off what you're looking at, and every mouse move is a correction, so the lessons aren't polluted by mouse moves to somewhere else (they used to be kept out by an 8 degree limit, which also dropped real corrections when the tracker was further off). With the gaze stale for a second, in a game, or with the headset off, the mouse moves the pointer as usual; with `free`, moving the mouse takes the pointer from the gaze. A left press while the gaze has the pointer isn't sent at once: the pointer stops where the gaze put it, you drag it onto what you meant with the button still down (panels only see it hover), and the release clicks there. Clicking at once clicked wherever the gaze was, often the wrong thing, before you could correct it. The drag is the correction. Snapping the pointer onto buttons and links is deferred: it needs accessibility (AT-SPI) on in the Frametop session, where it's off (no registry runs), plus app restarts, and it makes Chromium and Electron apps use more CPU. A press held still for `POINTER_GAZE_HOLD` (0.5 s) becomes a real press, so drags still work: hold, then move. The right button works the same way, with the right click on the release, and pressing it while the left press is held back starts a drag where the pointer is, like Meta+J then Meta+K. That drag lasts while either button (or key) is held, so a second right press, or a second Meta+K, is free to pan and tilt the panel being dragged; with the keyboard, the head turns it. Outside games the pointer then stays: the mouse going idle doesn't release it. A moving controller still releases it, as without gaze. Gaze mode is a mouse and keyboard feature: Steam reads the Frame controllers itself, outside SteamVR's bindings, so controller clicks at the gaze kept knocking SteamVR out of laser mode (see `docs/gaze-controllers.md`). Keyboard clicks (Meta+J, Meta+K) hold the dot still in your view while the keys are down, so the head, not the mouse, does the last bit; a quick tap clicks where the dot was at the press, since the head moves as you hit the keys. The relay hides Meta from the desktop as soon as such a combination fires, because KWin takes Meta with a mouse button as a window move or resize, which swallowed the clicks. The dot shows all the time by default. With `POINTER_GAZE_DOT=moving` it shows only while the mouse moves it (`POINTER_GAZE_SHOW`), while a press is held, and as a pulse for each click; otherwise it's transparent, so the laser still lands on it. Looking more than `POINTER_GAZE_RETAKE` (5 degrees) away from it, with the mouse still, gives it back, so small eye movements around the pointer don't pull it off what you're doing. A mouse nudge before a click whose correction is within `POINTER_GAZE_NUDGE_MAX` (55 degrees, half of what the headset shows across) is sent to the gaze service as a lesson: you were looking at where you clicked when the mouse took over, so the nudge is the eye tracker's error there. Using it is what calibrates it. A one-dot check in a panel fixed to the headset tops that up when the headset goes on, when our tracker thinks it moved, and when a correction is past that limit (the tracker is far off, so a click there isn't trusted as a lesson), and the full calibration and the headset fit check run in the same panel, so everything a user does to calibrate happens in one place in the headset; the gaze probe, a fullscreen GTK app, is the development tool. The limit was 8 degrees, which dropped every correction while our tracker was 12 off. Its dots sit at known directions from the headset, so the panel needs no screen geometry. The quick check's dot takes the gaze once it has held still, so what the tracker says doesn't have to be close for the capture to work. The full calibration's and the five-dot check's dots wait for a click while you look at the dot (a left click or Meta+J), because a steady gaze isn't always on the dot, and take the gaze held still up to the click; a right click or MetLine truncated
+Gaze mode is experimental and off by default (`POINTER_GAZE=1`, the Gaze page of Frametop Input Settings, `gaze/ft-gazectl on`, or a mouse button or key combination mapped to Gaze pointer on/off). It's MAGIC pointing (Zhai, Morimoto and Ihde, 1999): the pointer goes where you look, and the mouse does the last bit. The gaze service (`gaze/ft-gazed`) sends the helper the corrected gaze at 90 Hz (from one eye while the tracker has lost the other), and while the gaze has the pointer, the cursor ray is that gaze from the eye. The pointer is aimed at the gaze each frame, not steered toward it, so nothing can pile up. An earlier try in the gaze probe steered the pointer with relative moves, and lost it when the pointer went idle or a controller had the laser. By default (`POINTER_GAZE_MOUSE_MOVE=held`, the Gaze page's Mouse movement switch) moving the mouse does nothing while the gaze has the pointer: it moves the pointer only while a button is held, as a correction. A bumped or drifting mouse can't pull the pointer off what you're looking at, and every mouse move is a correction, so the lessons aren't polluted by mouse moves to somewhere else (they used to be kept out by an 8 degree limit, which also dropped real corrections when the tracker was further off). With the gaze stale for a second, in a game, or with the headset off, the mouse moves the pointer as usual; with `free`, moving the mouse takes the pointer from the gaze. A left press while the gaze has the pointer isn't sent at once: the pointer stops where the gaze put it, you drag it onto what you meant with the button still down (panels only see it hover), and the release clicks there. Clicking at once clicked wherever the gaze was, often the wrong thing, before you could correct it. The drag is the correction. Snapping the pointer onto buttons and links is deferred: the session now starts an AT-SPI registry, but apps still need to expose useful accessibility trees (and may need restarting), and it makes Chromium and Electron apps use more CPU. A press held still for `POINTER_GAZE_HOLD` (0.5 s) becomes a real press, so drags still work: hold, then move. The right button works the same way, with the right click on the release, and pressing it while the left press is held back starts a drag where the pointer is, like Meta+J then Meta+K. That drag lasts while either button (or key) is held, so a second right press, or a second Meta+K, is free to pan and tilt the panel being dragged; with the keyboard, the head turns it. Outside games the pointer then stays: the mouse going idle doesn't release it. A moving controller still releases it, as without gaze. Gaze mode is a mouse and keyboard feature: Steam reads the Frame controllers itself, outside SteamVR's bindings, so controller clicks at the gaze kept knocking SteamVR out of laser mode (see `docs/gaze-controllers.md`). Keyboard clicks (Meta+J, Meta+K) hold the dot still in your view while the keys are down, so the head, not the mouse, does the last bit; a quick tap clicks where the dot was at the press, since the head moves as you hit the keys. The relay hides Meta from the desktop as soon as such a combination fires, because KWin takes Meta with a mouse button as a window move or resize, which swallowed the clicks. The dot shows all the time by default. With `POINTER_GAZE_DOT=moving` it shows only while the mouse moves it (`POINTER_GAZE_SHOW`), while a press is held, and as a pulse for each click; otherwise it's transparent, so the laser still lands on it. Looking more than `POINTER_GAZE_RETAKE` (5 degrees) away from it, with the mouse still, gives it back, so small eye movements around the pointer don't pull it off what you're doing. A mouse nudge before a click whose correction is within `POINTER_GAZE_NUDGE_MAX` (55 degrees, half of what the headset shows across) is sent to the gaze service as a lesson: you were looking at where you clicked when the mouse took over, so the nudge is the eye tracker's error there. Using it is what calibrates it. A one-dot check in a panel fixed to the headset tops that up when the headset goes on, when our tracker thinks it moved, and when a correction is past that limit (the tracker is far off, so a click there isn't trusted as a lesson), and the full calibration and the headset fit check run in the same panel, so everything a user does to calibrate happens in one place in the headset; the gaze probe, a fullscreen GTK app, is the development tool. The limit was 8 degrees, which dropped every correction while our tracker was 12 off. Its dots sit at known directions from the headset, so the panel needs no screen geometry. The quick check's dot takes the gaze once it has held still, so what the tracker says doesn't have to be close for the capture to work. The full calibration's and the five-dot check's dots wait for a click while you look at the dot (a left click or Meta+J), because a steady gaze isn't always on the dot, and take the gaze held still up to the click; a rightLine truncated

 Replacing a loaded driver's files, as re-running the installer used to do, leaves SteamVR honoring the virtual controller's hand role but not its laser claim: the dashboard pointer stays unassigned until SteamVR restarts. The driver installer now leaves an unchanged driver in place.

@@ -169,10 +169,22 @@ The Frame controllers can be mapped like mouse buttons, but they aren't input de

 ## The desktop session

-The session is modeled on SteamOS's `steamos-nested-desktop` and runs beside it. It has its own runtime directory, config (`~/.config/frametop`), and state, so it never disturbs the stock desktop's layout or panels. It runs on a private D-Bus from `dbus-run-session`, which has two consequences. KDE only launches apps in systemd scopes when systemd is on the session bus, so everything started in the desktop lands in its systemd unit, and stopping the unit would kill all of it; `session/keep-apps.sh` moves those programs out first. And tools that need the real user bus, like podman and `distrobox-host-exec`, have to be pointed at it explicitly.
+The session is modeled on SteamOS's `steamos-nested-desktop` and runs beside it. It has its own runtime directory, config (`~/.config/frametop`), and state, so it never disturbs the stock desktop's layout or panels. It runs on a private D-Bus from `dbus-run-session`, which has two consequences. KDE only launches apps in systemd scopes when systemd is on the session bus, so everything started in the desktop lands in its systemd unit, and stopping the unit would kill all of it; `session/keep-apps.sh` moves those programs out first. And tools that need the real user bus, like podman and `distrobox-host-exec`, have to be pointed at it explicitly. Its own config folder also hides SteamVR's path registry (`~/.config/openvr/openvrpaths.vrpath`) from everything started in it: OpenVR programs there fail with `VRInitError_Init_PathRegistryNotFound`, and `vrpathreg adddriver` writes a new registry under `~/.config/frametop/openvr` that has no SteamVR in it and that SteamVR never reads. So Frametop's scripts run SteamVR's tools with `XDG_CONFIG_HOME=~/.config`.

 The VR launcher starts the session from the Steam client, and the client's environment came along: `LD_LIBRARY_PATH` pointing at Steam's own runtime, whose `libavcodec` has no H.264 decoder, so VLC in the desktop couldn't play most videos, plus the client's overlay and launch settings. The session script drops the client's variables before it starts anything. SteamOS's global Mesa settings (`/usr/share/deckard/mesavars.sh`) stay, and the gamescope session's Vulkan layer (`ENABLE_GAMESCOPE_WSI`) is only kept for the gamescope backend.

+### Nested accessibility
+
+The session drops an inherited `AT_SPI_BUS_ADDRESS`, so apps cannot accidentally use the host desktop's registry. It autostarts `session/ft-atspi` in Plasma phase 2, after KWin has set the nested display environment. The helper gets the live accessibility address from `org.a11y.Bus` on the private session bus, preserves any existing registry owner, updates the accessibility bus's activation environment, and tries `StartServiceByName` first.
+
+On SteamOS 0.3.0 with at-spi2-core 2.52.0, the native launcher can choose dbus-broker because its process belongs to a systemd user unit. Registry activation then fails: this desktop's private session bus does not have a systemd activation manager. In that case the helper starts only `at-spi2-registryd` on the already-existing accessibility bus. The registry refuses duplicate ownership. Unlike native activation's `--use-gnome-session`, the fallback does not try to register with GNOME's session manager; that flag did not explain the observed native activation failure.
+
+The fallback registry does not exit merely when its bus disconnects in the isolated SteamOS test. Its small watcher checks both private buses every 5 seconds, and terminates and reaps only the child it started when either bus disappears or the watcher is stopped. Each check runs `gdbus` twice; once a second, that cost about 1% of a core. `keep-apps.sh` keeps the watcher in the desktop unit when `desktops.sh start` runs the desktop as `frametop-desktop`. Started from the VR launcher, the desktop runs in steam.service, which doesn't stop with it, so there the watcher is the only thing that stops the registry. There is no second accessibility bus, global systemd environment update, process-name kill, or host registry replacement. Missing accessibility files or bus errors are nonfatal; the desktop still starts. Toolkit-specific accessibility opt-ins and pointer snapping are separate work.
+
+Run the isolated checks on the host with `/usr/bin/python3 session/test/test_accessibility.py`. They use private D-Bus buses, Xvfb and a GTK3 app, never the production display or input. Native activation uses a small `org.a11y.Bus` test provider pointing to a real private dbus-daemon with the installed registry service; the SteamOS fallback uses the installed bus launcher and broker. The tests check real app-tree discovery, existing owners, concurrent starts, session stop/restart, and teardown. They require test-only PyGObject (Gio and GTK3), Xvfb, and at-spi2-core; the runtime helper uses Python's standard library and the existing host `gdbus`. Actual Plasma autostart and VR desktop restart still require an approved hardware test.
+
+### Other session behavior
+
 Steam, not systemd, suspends the Frame: after `system_idle_suspend_ac_sec` (an hour by default) without input on AC power, it logs `Switching to power state: k_ESystemPowerState_Sleep` and suspends, even while charging. It's a Steam setting (Settings → Power → When Plugged In and Idle → Sleep after), which the Stay awake while plugged in switch in Frametop Display Settings sets to Never. SteamVR's standby, which turns the displays off when the headset comes off, is separate; see below.

 Flatpak apps need `XDG_DATA_DIRS` to include Flatpak's exports, or Plasma opens Discover instead of launching them, so the session sources `/etc/profile.d/flatpak.sh`.
@@ -185,6 +197,8 @@ KWin renders with OpenGL through zink on Turnip, Vulkan on the same GPU vrcompos

 The nested session also runs the system's XDG autostart entries, being a KDE session. Discover's update notifier started `plasma-discover --mode update` in it (520 to 620 MB resident and about 9% of a core, plus `flatpak-system-helper` and AppStream downloads), and IBus started a daemon, the kimpanel panel and its GTK extension that nothing can use: KWin hands text input to the one input method it starts (`ft-textinput`), and the session drops `QT_IM_MODULE`, `GTK_IM_MODULE` and `XMODIFIERS`. The session hides both for this desktop only, with `Hidden=true` copies in its own autostart folder. The geoclue demo agent stays: it's what answers apps' location requests to Geoclue outside GNOME, and it costs nothing while idle. Orca's entry only starts in GNOME-family desktops.

+Plasma 6.2.5 keeps each panel on a screen number (`lastScreen` in `plasma-org.kde.plasma.desktop-appletsrc`), and the numbers rank the enabled outputs by priority, so 0 is the primary screen. A panel whose number is past the screen count gets no view, and Plasma never moves it: the remap it runs at every start only moves a panel whose number has no desktop, and this desktop keeps a desktop for every output it has seen, spares included. So the taskbar was lost when the number of screens went down, and once it was found saved on a spare output, number 8 of a desktop with three screens ([#18](https://github.com/DeeJanuz/frametop/issues/18)). Before Plasma starts, the session runs `session/fix-panels.py`, which moves any panel numbered past the screen count, with its system tray's containment, to screen 0, keeping its widgets and settings. A panel stays put when screen 0 already has one on that edge, and comes back by itself if the screens do. The file is backed up to `<file>.ft-bak` first. Plasma's scripting can't do this while it runs (`panel.screen` is read-only in 6.2.5), so a lost taskbar comes back at the desktop's next start. `scripts/doctor.sh` and `scripts/report.sh` list the panels and their screens.
+
 Remote desktop is a chain (krdp, then FreeRDP inside Xvnc) because nothing on SteamOS serves KWin over VNC directly. Kept connected all the time, it cost about a core with nobody watching: krdpserver 55 to 78% (it encodes H.264 in software with openh264: VA-API finds no driver for the Frame's GPU in the container), FreeRDP 16 to 27%, Xvnc 6 to 11%, and the bridge's layout check every 5 seconds another 4%. krdp creates its screencast session per RDP connection and drops it when the connection closes (`SessionController::onNewConnection` in krdp 6.7), so an idle krdpserver costs nothing and can stay up; only the RDP connection has to go. The bridge connects FreeRDP when a VNC client appears and disconnects 45 seconds after the last one leaves. Xvnc has no hook for its clients, so the bridge counts established connections to its port with `ss`, woken early by Xvnc's log output; looking with `ss` once a second cost about 0.9% of a core in bash, against about 0.1% this way. `Xvnc -inetd` from a systemd socket would start a server per connection and lose sharing between viewers. The layout check (`ft-layout remote-view`, which scans `/proc` for plasmashell and runs `kscreen-doctor -j`) now runs only while FreeRDP runs, and then only after `kwinoutputconfig.json` or `frametop-layout.json` changes, with one check a minute in case a change touched neither.

 Program names stay within 15 characters, because Linux truncates process names there and the scripts find programs with `pgrep -x` and `pkill -x`. That's why the prefix is `ft-`.
@@ -224,6 +238,5 @@ On the Frame, SteamVR is part of the OS image (`/opt/steamvr`, the `deckard-stea

 - A controller button that shows the screens during a game. Games own the controllers, so this needs SteamVR input actions for ft-screens.
 - Drawing KWin's cursor on the screens.
- Plasma can lose its panels when the number of screens goes down, because they're saved against a screen that no longer exists. Removing `plasma-org.kde.plasma.desktop-appletsrc` and `plasmashellrc` from `~/.config/frametop` brings the default panels back.
 - Frame pacing and GPU cost with several busy screens haven't been measured.
 - Real standby on a stand, with rendering and tracking paused, not just the backlight off. SteamVR has no call for it, and its activity level follows the proximity sensor.
@@ -18,6 +18,8 @@ desktops.sh start | stop | restart | status | log [lines]

 When the VR launcher starts the desktop, it inherits the Steam client's environment. The session script drops the client's runtime from it (`LD_LIBRARY_PATH`, the `STEAM_*` settings, and the Steam overlay's Vulkan layer), so apps in the desktop use the system's libraries, including its video codecs, just as they would after a normal login.

+The nested session also starts an AT-SPI accessibility registry through `session/ft-atspi` in Plasma's autostart. It discovers the bus from this session, ignores an inherited host accessibility address, and leaves an existing registry alone. Accessibility errors do not stop the desktop. This supplies the registry infrastructure for apps that expose AT-SPI trees; it does not enable gaze snapping or force Chromium/Electron accessibility. After an approved desktop restart, an AT-SPI-aware app should be visible on the nested bus. See [design.md](design.md#nested-accessibility) for native activation, fallback lifecycle, and the isolated test command.
+
 KWin's blur and background contrast effects and its animations are off in this desktop, because KWin draws on the headset's GPU, which SteamVR needs. The session script turns them off once, the first time it starts (it leaves a setting you already have alone, and marks it done in `~/.config/frametop/frametoprc`), so turning them back on sticks. In the Frametop desktop, System Settings → Window Management → Desktop Effects has Blur and Background Contrast, and General Behavior has Animation speed. Or from a terminal, then restart the desktop:

 ```
@@ -44,7 +46,7 @@ Every screen is an overlay named `frametop.screen.N` with five controls:
 - `.curve` bends the screen into a cylinder around you, using your current distance as the radius, or makes it flat again.
 - `.roll` rolls the screen when you drag it sideways, like a knob. It snaps level within 2.5°, and scrolling on it turns 5° per notch.
 - `.resize`, the tab on the bottom right corner, sets the width. Screens go down to 15 cm wide.
- `.reset`, left of the bar, puts every screen back in its layout around where you are now, like Meta+Shift+R (`ft-layout apply`). In a VR game, where the screens leave the controllers to the game, aiming a controller at it turns SteamVR's laser on for that button alone, so the trigger clicks it; the game gets the controllers back half a second after you aim away.
+- `.reset`, left of the bar, puts every screen back in its layout around where you are now, like Meta+Shift+R (`ft-layout apply`).

 The controls are sized from both the screen's width and its distance from you, follow the surface of a curved screen, and stay invisible until a laser or the 3D mouse's cursor lands on one or comes within about 1.5 times a button's size of it. While invisible they're still there, fully transparent, so SteamVR's laser can find them. They're translucent until a laser is on them, like SteamVR's own window controls.

@@ -62,7 +64,7 @@ The Visibility & pins tab of Frametop Display Settings decides when the screens
 In the last three modes the hotkey shows the screens anyway. A screen can also be hidden on its own (Screens shown on the same tab, or `ft-layout hide N`): it stays hidden whatever the mode or the hotkey says, until it's shown again there. Windows on it stay put, and a new window that would open on it floats instead (ft-floatd). Profiles use this to show only some screens. Two more settings on the same tab cover VR games, which ft-screens detects as SteamVR scene apps:

 - During VR games, the Always mode hides the screens unless the dashboard is open (the default), or leaves them up.
- Controllers on the screens. Visible screens can keep SteamVR's laser mouse on, so controllers work them with the dashboard closed, but that also takes the controllers away from a game. By default this is off while a VR game runs, and the 3D mouse or the dashboard works the screens. The other choices are always on, or only with the dashboard open, which also suits flatscreen games since they aren't scene apps.
+- Controllers on the screens. Visible screens can keep SteamVR's laser mouse on, so controllers work them with the dashboard closed, but that also takes the controllers away from a game. By default this is off while a VR game runs, and the 3D mouse or the dashboard works the screens. Pointing a controller at a screen, a floating window, or the keyboard still turns its laser on, like SteamVR's own floating windows, and pointing away gives the game the controllers back. The other choices are always on, or only with the dashboard open, which also suits flatscreen games since they aren't scene apps.

 Input from the lasers reaches KWin through ft-screens' own seat. Keys come from the input relay, from pass-through keyboards and any key a pointer device passes through. Typing follows your last click: after a click on a screen it goes to the desktop, even with the SteamVR dashboard open, and after a mouse click on any other panel (the dashboard, Steam, an app like Spotify) it goes there instead. While it goes to the desktop, the relay grabs pass-through keyboards so gamescope, which reads every keyboard itself, doesn't type them into the Steam app too. A program that watches every keyboard for a hotkey loses a grabbed one; with `SHARE_KEYS=1` in `~/.config/frametop.conf`, their keys also go to `@frametop_keys` for it. That's off by default, since any local process that binds the name first would get everything typed into the desktop. Hidden screens don't take typing.

@@ -134,7 +136,7 @@ A Kirigami app with a Python backend, in the Plasma menu under Settings. It runs
 - Buttons maps a pointer device's buttons. Choose Capture a button, press the button or key, then pick an action: a click, back, scroll, toggle dashboard, recenter, pointer on or off, head follow on or off, gaze pointer on or off, gaze precision, gaze drag, gaze quick check, faster or slower, reset the screen layout, hide or show the screens, open or close the keyboard, float a window in VR or put it back, put all floating windows back, pause or resume Frametop ([Pausing for VR games](#pausing-for-vr-games)), Open profile NAME (one per profile, [profiles.md](profiles.md)), pass the key through, or nothing. Devices with saved mappings are listed even while they're asleep.
 - Controllers maps the Frame controllers' buttons (every button but the system button) to the same actions, except passing a key through and the gaze actions: gaze mode is a mouse and keyboard feature ([gaze-controllers.md](gaze-controllers.md)). Capture a button and press it on a controller, or pick it from the list. The controllers aren't input devices on the host; only SteamVR sees them. So the pointer helper reads them with SteamVR input (`pointer/helper/vrbuttons.h`, `pointer/helper/actions/`) and sends presses to the relay (`vrbtn right/a 1`), which does the mapped action. The helper only takes the buttons that are mapped (the relay tells it with `vrbind`), at an overlay-global priority, and only while no game (scene application) runs, so games keep every button; with In games on (`controller_in_games`), a mapped button is taken from games too. That needs SteamVR's "Enable global input from overlays (Experimental)" setting (`steamvr/globalActionSetPriority`), which the page's Global input switch turns on and off. Mappings are saved as `controller_buttons` in `~/.config/frametop-input.json`.
 - Game optimization has the pause for VR games: its state with Pause now or Resume, whether VR games pause Frametop by themselves, the controller gesture (one or two buttons, pressed once or twice; one button always takes two presses), what happens to the desktop, and the sound. They're saved as `pause_auto`, `pause_gesture`, `pause_desktop`, and `pause_sound` in `~/.config/frametop-input.json`. See [Pausing for VR games](#pausing-for-vr-games).
- Keyboard sets when Frametop's keyboard opens: whenever a text field is selected; only while no pass-through keyboard is connected (the default; keyboards other programs make through uinput, like frame-voice's, don't count); only with a mouse or controller button mapped to Open/close keyboard; or never, which turns the button off too. Keep it open (on by default, `vr_keyboard_persist`) leaves it open after the text field loses focus. The mode is saved as `vr_keyboard` in `~/.config/frametop-input.json`, and the page lists the keyboards that count as connected. Its Key combinations section maps modifiers plus a key, or one modifier tapped on its own, on any keyboard, to any action but passing a key through or nothing, or to Run a command…: a command line the input relay runs with `sh -c` when you press the keys (`command:CMD`). The command runs as the relay's user service, outside the desktop's session, with `layout/`, `float/` and `steam/` on its `PATH` (so `ft-layout use Work` or `ft-float launch org.kde.dolphin` work as they are), and its output goes to the relay's journal. The gaze clicks (Gaze left click and Gaze right click) only go on key combinations. The defaults are a Meta tap (open the Steam menu, or close the dashboard), Meta+J (gaze left click), Meta+K (gaze right click), and Meta+Shift+F (float window in VR or put it back); remove them or add others there. A tap is a press and release with no other key, mouse button, or scroll in between; a bound one sends the desktop F24 before the release, so Plasma's launcher doesn't open on it. The combination's last key isn't typed, and the modifiers still reach the app; while typing goes to Steam rather than the desktop, keyboards aren't grabbed, so Steam or the game sees the keys too. They're saved as `key_bindings` in the same file; a file with its own list, even an empty one, gets no defaults.
+- Keyboard sets when Frametop's keyboard opens: whenever a text field is selected; only while no pass-through keyboard is connected (the default; keyboards other programs make through uinput, like frame-voice's, don't count); only with a mouse or controller button mapped to Open/close keyboard; or never, which turns the button off too. Keep it open (on by default, `vr_keyboard_persist`) leaves it open after the text field loses focus. The mode is saved as `vr_keyboard` in `~/.config/frametop-input.json`, and the page lists the keyboards that count as connected. Its Key combinations section maps modifiers plus a key, or one modifier tapped on its own, on any keyboard, to any action but passing a key through or nothing, or to Run a command…: a command line the input relay runs with `sh -c` when you press the keys (`command:CMD`). The command runs as the relay's user service, outside the desktop's session, with `layout/`, `float/` and `steam/` on its `PATH` (so `ft-layout use Work` or `ft-float launch org.kde.dolphin` work as they are), and its output goes to the relay's journal. The gaze clicks (Gaze left click and Gaze right click) only go on key combinations. The defaults are a Meta tap (open the Steam menu, or close the dashboard), Meta+J (gaze left click), Meta+K (gaze right click), Meta+Shift+F (float window in VR or put it back), and Meta+Alt+Tab and Meta+Alt+Shift+Tab (spin the panels: every screen and floating window turns about your head, so the next one on the right or left comes to the front; ft-screens' `spin next|prev|<degrees>`); remove them or add others there. A tap is a press and release with no other key, mouse button, or scroll in between; a bound one sends the desktop F24 before the release, so Plasma's launcher doesn't open on it. The combination's last key isn't typed, and the modifiers still reach the app; while typing goes to Steam rather than the desktop, keyboards aren't grabbed, so Steam or the game sees the keys too. They're saved as `key_bindings` in the same file; a file with its own list, even an empty one, gets no defaults.
 - Pointer has a Head follow switch and sliders for the pointer settings, which apply immediately, and a Recenter button.
 - Ignored panels lists the SteamVR overlays that are showing, grouped by app (the first two parts of the overlay key, such as `sasaken.frame-perf-overlay`), from the pointer helper (`overlays`). Tick a panel, or Ignore the whole app, and the pointer passes through it to what's behind. It's for panels you only look at, like a performance overlay that follows your view. The list is saved as `POINTER_IGNORE` in `~/.config/frametop.conf`: comma-separated overlay keys, where a shell pattern like `vendor.app*` covers a whole app, including panels it opens later. The helper reloads at once. Frametop's own screens aren't listed, and entries for apps that aren't open are listed below, to remove.
 - Gaze has the gaze pointer switch (on now and from now on; a mapped button toggles it until the helper restarts), what the mouse's left button and movement do, the gaze dot, the eye tracker and eye bias, the gaze mode sliders, the gaze service's state (headset, samples per second, how often the tracker is losing each eye, the calibration, the nudges learned), and Quick check, Calibrate, and Check headset fit (each in a panel in the headset), Reload calibration, and Forget nudges. The gaze probe, a development tool, is in the page's overflow menu.
@@ -261,7 +263,7 @@ Your hands show over the screens: where a tracked hand is between an eye and a s
 - `ft-camd` borrows XRService's camera buffers and publishes the four IR tracking cameras to `/run/user/UID/frametop-hands/cam-ring`. It runs on the host as `frametop-camd.service`, with file capabilities that `hands/run.sh install` sets through sudo, and it drops them once set up. A rebuild clears them: `hands/run.sh caps`.
 - `ft-hands` runs in the `dev` container as `frametop-hands.service`. It finds and triangulates the hands, and publishes `hands` (read by ft-screens' cutouts) and `gestures` (pinches and grips, read by the pointer helper) next to the ring.
 - The install leaves both off, and they don't start with SteamVR. `ft-handsctl on` starts them while SteamVR runs, and `ft-handsctl off` stops them; they also stop with SteamVR. The install links `ft-handsctl` into `~/.local/bin`. `ft-handsctl status` and `ft-handsctl log` (or `hands/run.sh status` and `log`) show how they're doing, `ft-handsctl cutouts on|off` turns just the cutouts off, and `ft-handsctl gestures` shows pinches and grips live.
- Settings in `~/.config/frametop.conf`: `HANDS_SWAP_SIDES` (after some SteamVR restarts the side cameras' names come out swapped, and hands land beside the holes; `hands/tools/check_sides.py --ring` tells), `HANDS_CPUS`, the cameras it tracks with (`HANDS_CAMERAS`, `HANDS_BRIGHT`, `HANDS_BRIGHT_ON`, `HANDS_BRIGHT_OFF`, `HANDS_COLOR_LEFT`, `HANDS_COLOR_CROP`), and the pointer helper's `POINTER_HANDS`, `POINTER_PINCH_GAIN`, `POINTER_PINCH_DEADZONE`, `POINTER_GRIP_GAIN`, `POINTER_GRIP_BELOW`, and `POINTER_PINCH_TYPING`. The example config explains each.
+- Settings in `~/.config/frametop.conf`: `HANDS_SWAP_SIDES` (`auto`, the default: ft-hands tells from the hands when some SteamVR restart has swapped the side cameras' names, and fixes them; `0` or `1` force them, and `hands/tools/check_sides.py --ring` tells which is right), `HANDS_CPUS`, the cameras it tracks with (`HANDS_CAMERAS`, `HANDS_BRIGHT`, `HANDS_BRIGHT_ON`, `HANDS_BRIGHT_OFF`, `HANDS_COLOR_LEFT`, `HANDS_COLOR_CROP`), and the pointer helper's `POINTER_HANDS`, `POINTER_PINCH_GAIN`, `POINTER_PINCH_DEADZONE`, `POINTER_GRIP_GAIN`, `POINTER_GRIP_BELOW`, and `POINTER_PINCH_TYPING`. The example config explains each.

 Details, options, and the recording and replay tools are in [hands/README.md](../hands/README.md).

@@ -378,6 +378,17 @@ function run(c) {
        case "activate":
            if (w) workspace.activeWindow = w;
            break;
+        case "activate-output": {  // the top window on that output (a spin brought it to the front)
+            const order = workspace.stackingOrder;
+            for (let i = order.length - 1; i >= 0; --i) {
+                const o = order[i];
+                if (o.deleted || o.minimized || o.hidden || !o.managed || !o.output) continue;
+                if (o.output.name !== c.output || !o.normalWindow || o.popupWindow) continue;
+                workspace.activeWindow = o;
+                break;
+            }
+            break;
+        }
        case "minimize":
            if (w) w.minimized = c.on;
            break;
@@ -18,6 +18,8 @@ command-line side). Replies go to the sender:
  ("float pointer" is the float key: the window under the pointer, else the active one,
  floated or docked; the input relay sends it for float_toggle, and "dock all" for dock_all)
  dock N | close N | resize N W H | scale N STEPS                      (ft-screens, N = its screen)
+  front N   (ft-screens: a spin brought panel N to the front: make its window, or the top one
+            on a screen, KWin's active window)

 Spare outputs are WL-<screens> .. WL-<screens + slots - 1>. A floating window's output is its
 frame plus a margin on each side (FLOAT_MARGIN pixels), so menus have room; the panel shows
@@ -1063,6 +1065,13 @@ class Daemon:
            for f in list(self.floats.values()):
                self.dock(f)
            return "ok"
+        if cmd == "front" and len(rest) == 1 and rest[0].isdigit():
+            f = self.by_panel(int(rest[0]))
+            if f:
+                self.command(cmd="activate", id=f.id)
+            else:  # a screen: its output is WL-<N - 1>
+                self.command(cmd="activate-output", output=f"WL-{int(rest[0]) - 1}")
+            return "ok"
        if cmd in ("dock", "close", "resize", "scale") and rest and rest[0].isdigit():
            f = self.by_panel(int(rest[0]))
            if not f:
@@ -33,7 +33,7 @@ Gaze as an input method for the whole desktop, without replacing anything of Ste
 - **The mouse only corrects** (the default; the Gaze page's Mouse movement switch, `POINTER_GAZE_MOUSE_MOVE=held`): while the gaze has the pointer, moving the mouse does nothing. The buttons work like Meta+J and Meta+K: press and hold one and the pointer stops where you look; move the mouse onto what you meant and let go to click there (a left or a right click). Held still for half a second, a press is a real one (to drag). Once you've moved, the left button alone only clicks: press the right one while still holding the left to start a drag there; it lasts while either button is held. Press the right one again (a double right click, the left still held) to pan and tilt what you're dragging, as a right press does during any drag. A bumped or drifting mouse can't pull the pointer away, and every mouse move is a correction, so the tracker only learns from real ones. With the gaze stale for a second (the tracker stopped, eyes lost), in a game, or with the headset off, the mouse moves the pointer as usual. `free` (the switch off) lets the mouse take the pointer any time.
 - **Keyboard clicks** (Meta+J left, Meta+K right; other key combinations on the Keyboard page of Input Settings): tap to click where you look. A quick tap (let go within 0.25 s, `POINTER_KEY_TAP`) clicks where the dot was when you pressed, whatever your head did, and tells the gaze service it was right there. Hold instead, and the dot stays put in your view: turn your head until it sits on what you meant, and let go to click there (the correction is a lesson, as with the mouse, under the same limit: past `POINTER_GAZE_NUDGE_MAX` it opens the quick check instead). Hold still for half a second to press for real, then turn your head to drag. With Meta+J held, Meta+K presses where the dot is now, so you can correct first and then drag; the drag lasts while either key is held. Meta+K during a Meta+J drag (again, after starting it with Meta+K: a double Meta+K) pans and tilts what you're dragging while it's held: turn your head to turn it.
 - **Learning from nudges:** if the mouse took the pointer from the gaze and moved it (0.2 degrees or more, and the correction within `POINTER_GAZE_NUDGE_MAX`: 55 degrees by default, half of the 109 the headset shows across, and 1 to 110; the same limit for mouse, keyboard, and pinch clicks) before you clicked, or you dragged a held press that far, you were nudging it onto what you looked at. The helper sends that as a lesson, from the raw gaze when the mouse took over to where you clicked, and ft-gazed learns it. So using it is what calibrates it. The raw gaze is one ft-gazed sent, so it also finds when that look was, and what each eye read then. With SteamVR, each eye learns its own error. With our tracker, the look goes to it as a click, like the probe's, and it relearns how the headset sits on your face. After the headset was off, your first nudge and click there resets that (the quick check's dot does the same). A correction past `POINTER_GAZE_NUDGE_MAX` isn't learned: the helper asks ft-gazed for the quick check instead ("recheck", after its 2-minute cooldown). Tested on our tracker's 409 clicks since its Sep 29 calibration: a one-dot check set from any one of them put the next 2 minutes' clicks within 15 degrees (99% within 4.2) and the next 10 minutes' within 25 (the far ones after the headset moved), so the check gets back well under it. The limit used to be 8 degrees, and live on 2026-10-01 our tracker was 12 off after the headset went on, so every correction was dropped. One lesson moves the whole correction by only a third of what it measured (more near where it was taken), since in the first live test one 6 degree lesson moved everything and put the next target 7 degrees off. `ft-gazectl status` shows the lessons, and `ft-gazectl forget` drops them.
- **Checks and calibration in the headset** (`gaze/gazecheck.py`, shown by `gaze/panel/ft-gazepanel`, a panel fixed to the headset that ft-gazed runs): a one-dot quick check opens when you put the headset on (SteamVR's tracker sees your eyes for 3 s after none for 3 s; its "HMD on" log line can't say, since it repeats every minute or so and can stay on for hours with nobody in the headset), when our tracker asks for a click (its "reseat", when the headset may sit differently), at most once every 2 minutes, and from Quick check on the Gaze page. Look at the dot: it takes your gaze once it has held still for 0.6 s (the steadiness counts, not where the tracker puts it, so it works however far off it is), or at once with a left click or Meta+J; a right click or Meta+K closes it, and ignoring it changes nothing. It also runs when a click's correction was past `POINTER_GAZE_NUDGE_MAX`. The dot is still and the ring fills in quarters, so the panel is drawn again only a few times per dot. If the first 3 lessons after it are still over 2 degrees off, five dots follow. The full calibration (Calibrate on the Gaze page, or by itself whenever gaze mode is on without one and your eyes are seen) is the probe's: three rounds, dark, medium and bright, of the middle and a ring around it, in a panel 64 degrees wide, with Frametop's screens hidden. Its dots (and the five-dot check's) wait for a click: look at the dot and left click or press Meta+J, and the gaze held still up to then is taken. A dot that isn't taken says why, on an orange line over the instructions: with SteamVR's tracker, what dropped most of that look's samples (an eye lost, a blink, the two eyes disagreeing); with ours, its reply (an eye seen in too few frames, or moving). A dot gets two tries, then it's skipped. A calibration left with under two thirds of its dots fails and names the most common reason, as the Gaze page does after it. A click that has taken nothing after 1.5 s says what it waits for: the gaze to hold still, or an eye tracker that isn't sending. Capturing whenever the gaze held still sometimes took a look that wasn't on the dot. The panel draws into three shared buffers SteamVR imported once, as Frametop's keyboard does: uploading each picture anew (SetOverlayRaw) flickered, and in one live test left the headset showing an old picture. Quitting it while there's still no calibration turns gaze mode off; turning it on again reopens it. One that closes otherwise unfinished (ignored for 2 minutes, too few dots) opens again after the headset comes off and on. Why gaze mode, on, can't work yet goes in the service's status as `checks.problem`, which the Gaze page shows under the Gaze pointer switch. For our tracker a check is a click and the calibration is its own (calib-point per dot); for SteamVR's, a check is a lesson for each eye and the calibration replaces calibration.json, and the lessons start over. Checks go to `checks.jsonl`.
+- **Checks and calibration in the headset** (`gaze/gazecheck.py`, shown by `gaze/panel/ft-gazepanel`, a panel fixed to the headset that ft-gazed runs): a one-dot quick check opens when you put the headset on (SteamVR's tracker sees your eyes for 3 s after none for 3 s; its "HMD on" log line can't say, since it repeats every minute or so and can stay on for hours with nobody in the headset), when our tracker asks for a click (its "reseat", when the headset may sit differently), at most once every 2 minutes, and from Quick check on the Gaze page. Look at the dot: it takes your gaze once it has held still for 0.6 s (the steadiness counts, not where the tracker puts it, so it works however far off it is), or at once with a left click or Meta+J; a right click or Meta+K closes it, and ignoring it changes nothing. It also runs when a click's correction was past `POINTER_GAZE_NUDGE_MAX`. The dot is still and the ring fills in quarters, so the panel is drawn again only a few times per dot. If the first 3 lessons after it are still over 2 degrees off, five dots follow. The full calibration (Calibrate on the Gaze page, or by itself whenever gaze mode is on without one and your eyes are seen) is the probe's: three rounds, dark, medium and bright, of the middle and a ring around it, in a panel 64 degrees wide, with Frametop's screens hidden. Its dots (and the five-dot check's) wait for a click: look at the dot and left click or press Meta+J, and the gaze held still up to then is taken. Our tracker's first calibration has no gaze to go on, since ft-eyes maps pupils to a gaze only once it has a calibration: it opens once SteamVR's tracker sees an eye and ft-eyes answers, and a click takes the 0.6 s up to it, as long as ft-eyes saw each pupil held still then (before 2026-10-05 it waited for a gaze, so a fresh install could never calibrate ours). A dot that isn't taken says why, on an orange line over the instructions: with SteamVR's tracker, what dropped most of that look's samples (an eye lost, a blink, the two eyes disagreeing); with ours, its reply (an eye seen in too few frames, or moving). A dot gets two tries, then it's skipped. A calibration left with under two thirds of its dots fails and names the most common reason, as the Gaze page does after it. A click that has taken nothing after 1.5 s says what it waits for: the gaze to hold still, or an eye tracker that isn't sending. Capturing whenever the gaze held still sometimes took a look that wasn't on the dot. The panel draws into three shared buffers SteamVR imported once, as Frametop's keyboard does: uploading each picture anew (SetOverlayRaw) flickered, and in one live test left the headset showing an old picture. Quitting it while there's still no calibration turns gaze mode off; turning it on again reopens it. One that closes otherwise unfinished (ignored for 2 minutes, too few dots) opens again after the headset comes off and on. Why gaze mode, on, can't work yet goes in the service's status as `checks.problem`, which the Gaze page shows under the Gaze pointer switch. For our tracker a check is a click and the calibration is its own (calib-point per dot); for SteamVR's, a check is a lesson for each eye and the calibration replaces calibration.json, and the lessons start over. Checks go to `checks.jsonl`.
 - Nothing writes to SteamVR, its eye tracker, or its files: ft-gaze maps the eye tracker's shared memory read-only. With no fresh gaze (a blink, the service stopped, the headset off), the pointer stays where it is, and the mouse works as always.
 - **Idle while the gaze isn't used:** ft-gaze and our own tracker run only while gaze mode is on and someone wears the headset (the pointer helper says both: SteamVR drops the headset's activity level as soon as it comes off), while a check or the calibration is open or asked for, or while the Gaze page of Frametop Input Settings is open (it renews a `wake` lease). 30 seconds after the last use they stop, and our frame grabber goes idle with our tracker. With our tracker, that saves over half a core: on 2026-10-02, with gaze mode off, ft-eyes took about 60% of a core, and ft-eyegrab, ft-gaze and ft-gazed 3 to 4% each. A check asked for while it idles starts the tracker and opens once it sends. When the gaze is used again, it takes a few seconds to come back, and our tracker's first click re-seats it, as after the headset was off: so the quick check opens when gaze mode comes on after the service idled, as it does when you put the headset on. `ft-gazectl status` says `"awake"`, and `"idle"` says why it isn't. A stand that covers the proximity sensor makes the headset seem worn, so with gaze mode on it doesn't idle there.

@@ -48,6 +48,13 @@ click with nothing taken after ACCEPT_WAIT, and a failed calibration names its m
 reason there and in the status. A right click or Meta+K ("calquit") closes the panel. The pointer hides meanwhile ("calpanel 1",
 renewed every second; the helper shows it again by itself when that stops).

+Our tracker's first calibration: before it has one, ft-eyes publishes no gaze (it maps pupils
+to a gaze only with a calibration), so there's no gaze to hold still. Its calibration runs
+anyway ("blind"): someone in the headset (SteamVR's tracker sees an eye) and ft-eyes answering
+are enough to start it, each dot stands in for the gaze, and a click takes the CHECK_WINDOW up
+to it. ft-eyes then checks that each pupil was seen and held still in that window (calib-point)
+and says why not. Without this, a fresh install could never calibrate our tracker.
+
 What a capture teaches:
  our tracker   quick and five: a click ("click T YAW PITCH", like a pointer lesson); full:
                calib-start, a calib-point for each dot, calib-fit (its calibration)
@@ -336,9 +343,17 @@ class Checks:
        return time.monotonic() - self.seen_at < within

    def can_run(self):
-        """Someone's in the headset and the tracker is sending."""
+        """Someone's in the headset and the tracker is sending. Our tracker sends no gaze before
+        its first calibration: then ft-eyes answering (calibrated() is False only once it has)
+        is enough, since the calibration is what it needs (see "first calibration" at the top)."""
+        if self.blind():
+            return self.eyes_seen()
        return self.eyes_seen() and time.monotonic() - self.svc.last_sample < 2

+    def blind(self):
+        """Our tracker is in use, running, and not calibrated yet: it has no gaze to send."""
+        return self.svc.kind == "own" and self.calibrated() is False
+
    def on_gaze_on(self):
        self.full_armed = True
        self.need_full("gaze mode came on without a calibration")
@@ -356,7 +371,7 @@ class Checks:
        if not self.can_run() and self.svc.waking():
            return  # the tracker is still starting (the service idled)
        if not self.can_run():
-            why = ("the eye tracker isn't sending" if now - self.svc.last_sample >= 2
+            why = ("the eye tracker isn't sending" if now - self.svc.last_sample >= 2 and not self.blind()
                   else "no eyes seen (is the headset on?)")
        elif now < self.full_retry_at:
            return
@@ -408,6 +423,9 @@ class Checks:
        if not self.can_run():
            return "error the headset is off or the tracker isn't sending"
        own = svc.kind == "own"
+        blind = self.blind()
+        if blind and kind != "full":
+            return "error our tracker isn't calibrated yet: use Calibrate"
        if kind == "full" and own:
            reply = ask(EYES, "calib-start", 3.0)
            if not reply.startswith("ok"):
@@ -416,8 +434,10 @@ class Checks:
        now = time.monotonic()
        self.check = {"kind": kind, "reason": reason, "own": own, "dots": check_dots(kind, own), "i": 0,
                      "started": now, "shown": now, "run": [], "accept": False, "done_at": None, "tries": 0,
-                      "skipped": 0, "captured": 0, "points": {}, "reasons": {}, "fit_reasons": set(), "note": ""}
-        log(f"{kind} check: {reason}")
+                      "skipped": 0, "captured": 0, "points": {}, "reasons": {}, "fit_reasons": set(), "note": "",
+                      "blind": blind}
+        log(f"{kind} check: {reason}" + (" (our tracker's first: no gaze yet, so each click takes the look "
+                                         "up to it)" if blind else ""))
        if kind == "full":
            st = ask(SCREENS, "state", 0.5).split()
            if len(st) >= 3 and st[0] == "ok":
@@ -519,6 +539,12 @@ class Checks:
            return
        if c["own"]:
            src = s["src"].get("own") or {}
+            if c["blind"]:
+                # Our tracker's first calibration: no gaze yet, so the dot stands in for it (the
+                # gaze can't seem to move) and a click takes the look up to it. ft-eyes checks
+                # the pupils held still (see the top).
+                yaw, pitch, _ = c["dots"][c["i"]]
+                src = {"hy": yaw, "hp": pitch}
        else:
            src = s["src"].get("mmap1") or {}
            if "hy" not in src:
@@ -868,7 +894,11 @@ class Checks:
            self.back_since = None  # gone again before DON_DELAY
        elif self.back_since is not None and now - self.back_since >= DON_DELAY:
            self.away, self.back_since = False, None
-            self.full_armed = True  # a calibration that closed unfinished opens again
+            if not self.check:
+                # A calibration that closed unfinished opens again. Not one still open: gaze mode
+                # coming on wakes our tracker, so its eyes come back just as the calibration
+                # opens, and re-arming then opened a second one when the first ended.
+                self.full_armed = True
            self.auto_quick("the headset went on")
        if svc.kind == "own" and now - svc.own_at < 5:
            reseat = any(e.get("reseat") for e in (svc.own.get("eyes") or {}).values())
@@ -0,0 +1,238 @@
+#!/usr/bin/env python3
+"""Offline test of our own eye tracker's first calibration (gaze/gazecheck.py, "blind"): before
+it has a calibration, ft-eyes publishes no gaze, and the calibration must still open and take
+its dots. Until 2026-10-05 it couldn't: a fresh install that chose our tracker never calibrated.
+
+Runs ft-gazed's Service with its sockets renamed and HOME in a temp folder (state and settings
+go there), a fake pointer helper (gaze mode on, headset worn), a fake ft-gaze (SteamVR sees both
+eyes; "own" is {"ok":0}, as with an uncalibrated ft-eyes), a fake ft-eyes control socket, and no
+panel (a stand-in process). Nothing reaches the live gaze service, the pointer helper, ft-eyes,
+or SteamVR, so it's safe next to them.
+
+  gaze/test/first-calibration-test.py
+"""
+import os
+import tempfile
+
+HOME = tempfile.mkdtemp(prefix="ft-gaze-first-cal-test-")
+os.environ["HOME"] = HOME  # before gazecal: its STATE, and frametop.conf, follow HOME
+
+import importlib.machinery  # noqa: E402
+import importlib.util  # noqa: E402
+import json  # noqa: E402
+import selectors  # noqa: E402
+import shutil  # noqa: E402
+import socket  # noqa: E402
+import subprocess  # noqa: E402
+import sys  # noqa: E402
+import threading  # noqa: E402
+import time  # noqa: E402
+
+HERE = os.path.dirname(os.path.abspath(__file__))
+GAZE = os.path.join(HERE, "..")
+sys.path.insert(0, GAZE)
+loader = importlib.machinery.SourceFileLoader("ftgazed", os.path.join(GAZE, "ft-gazed"))
+gazed = importlib.util.module_from_spec(importlib.util.spec_from_loader("ftgazed", loader))
+loader.exec_module(gazed)
+import gazecheck  # noqa: E402  (the module ft-gazed imported)
+
+tag = f"ft_gaze_first_cal_test_{os.getpid()}"
+gazed.ME = f"\0{tag}_gazed"
+gazed.POINTER = gazecheck.POINTER = f"\0{tag}_helper"
+gazecheck.SCREENS = f"\0{tag}_screens"
+gazecheck.PANEL = f"\0{tag}_panel"
+gazed.EYES_SOCKET = gazecheck.EYES = f"\0{tag}_eyes"
+gazed.read_settings = lambda: ("own", "auto", "auto", 55.0)
+DOTS = 3
+real_dots = gazecheck.check_dots
+gazecheck.check_dots = lambda kind, own: real_dots(kind, own)[:DOTS]  # a short calibration
+logs = []
+gazed.log = gazecheck.log = lambda msg: logs.append(msg)
+
+# The fake ft-gaze: 90 samples a second, SteamVR sees both eyes, no gaze from ours.
+FAKE = os.path.join(HOME, "ft-gaze")
+with open(FAKE, "w") as f:
+    f.write('''import json, os, select, sys, time
+while True:
+    if select.select([sys.stdin], [], [], 1 / 90)[0]:
+        if not os.read(0, 4096):
+            break
+    print(json.dumps({"t": time.monotonic(), "src": {"mmap1": {"hy": 1.0, "hp": 2.0, "unc": [0.001, 0.001],
+          "open": [0.8, 0.8]}, "own": {"ok": 0}}}), flush=True)
+''')
+SLEEPER = [sys.executable, "-c", "import sys; sys.stdin.read()"]  # quits when its stdin closes
+
+
+def start_helper(self):
+    """ft-gaze, straight from here instead of the dev container."""
+    self.proc = subprocess.Popen([sys.executable, FAKE], stdin=subprocess.PIPE, stdout=subprocess.PIPE,
+                                 stderr=subprocess.PIPE)
+    self.proc_sources = self.wanted_sources()
+    os.set_blocking(self.proc.stdout.fileno(), False)
+    os.set_blocking(self.proc.stderr.fileno(), False)
+    self.sel.register(self.proc.stdout, selectors.EVENT_READ, "stdout")
+    self.sel.register(self.proc.stderr, selectors.EVENT_READ, "stderr")
+    self.buf = b""
+
+
+def start_eyes(self):
+    """ft-eyes' process: a stand-in. Its control socket is the fake below."""
+    self.eyes_proc = subprocess.Popen(SLEEPER, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
+    os.set_blocking(self.eyes_proc.stderr.fileno(), False)
+    self.sel.register(self.eyes_proc.stderr, selectors.EVENT_READ, "eyes")
+
+
+def start_panel(self):
+    self.panel_proc = subprocess.Popen(SLEEPER, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
+    os.set_blocking(self.panel_proc.stderr.fileno(), False)
+    self.sel.register(self.panel_proc.stderr, selectors.EVENT_READ, "panel")
+
+
+gazed.Service.start_helper = start_helper
+gazed.Service.start_eyes = start_eyes
+gazecheck.Checks.start_panel = start_panel
+
+# The fake ft-eyes: uncalibrated until calib-fit. "fail" answers the next calib-point with that.
+eyes_state = {"cal": None, "points": [], "fail": None}
+eyes = socket.socket(socket.AF_UNIX, socket.SOCK_DGRAM)
+eyes.bind(gazed.EYES_SOCKET)
+eyes.settimeout(0.2)
+
+
+def eyes_answer():
+    while True:
+        try:
+            data, addr = eyes.recvfrom(512)
+        except socket.timeout:
+            continue
+        except OSError:
+            return
+        w = data.decode().split()
+        if w[0] == "status":
+            reply = json.dumps({"calibration": eyes_state["cal"], "calibrating": False, "dots": 0,
+                                "eyes": {"right": {"reseat": False}, "left": {"reseat": False}}})
+        elif w[0] == "calib-start":
+            eyes_state["points"] = []
+            reply = "ok"
+        elif w[0] == "calib-point":
+            eyes_state["points"].append(tuple(map(float, w[1:5])))
+            reply, eyes_state["fail"] = eyes_state["fail"] or "ok 50 50 1.00 1.00", None
+        elif w[0] == "calib-fit":
+            eyes_state["cal"] = {"made": "test", "dots": len(eyes_state["points"])}
+            reply = f"ok {len(eyes_state['points'])} dots"
+        else:
+            reply = f"fail unknown command {w[0]}"
+        if addr:
+            eyes.sendto(reply.encode(), addr)
+
+
+threading.Thread(target=eyes_answer, daemon=True).start()
+
+helper_state = {"reply": "ok off worn", "heard": []}
+helper = socket.socket(socket.AF_UNIX, socket.SOCK_DGRAM)
+helper.bind(gazed.POINTER)
+helper.settimeout(0.2)
+
+
+def helper_answer():
+    while True:
+        try:
+            data, addr = helper.recvfrom(512)
+        except socket.timeout:
+            continue
+        except OSError:
+            return
+        if data.startswith(b"gaze ?") and addr:
+            helper.sendto(helper_state["reply"].encode(), addr)
+        else:
+            helper_state["heard"].append(data.decode())
+
+
+threading.Thread(target=helper_answer, daemon=True).start()
+svc = gazed.Service(None, False, gazed.POINTER)
+threading.Thread(target=svc.run, daemon=True).start()
+ctl = socket.socket(socket.AF_UNIX, socket.SOCK_DGRAM)
+ctl.bind("")
+ctl.settimeout(3)
+
+
+def ask(cmd):
+    ctl.sendto(cmd.encode(), gazed.ME)
+    return ctl.recv(65536).decode()
+
+
+failures = []
+
+
+def check(label, got, want):
+    ok = got == want
+    print(("ok    " if ok else "FAIL  ") + label + ("" if ok else f": got {got!r}, want {want!r}"), flush=True)
+    if not ok:
+        failures.append(label)
+
+
+def wait(cond, seconds):
+    end = time.monotonic() + seconds
+    while time.monotonic() < end:
+        if cond():
+            return True
+        time.sleep(0.05)
+    return cond()
+
+
+def check_state():
+    return svc.checks.check or {}
+
+
+def take_dot(i):
+    """Wait for dot i to settle, then click: is it taken?"""
+    wait(lambda: check_state().get("i") == i and not check_state().get("done_at"), 3)
+    time.sleep(gazecheck.CHECK_SETTLE + gazecheck.CHECK_WINDOW + 0.1)
+    before = check_state().get("captured", 0)
+    ask("calaccept")
+    return wait(lambda: check_state().get("captured", 0) > before, 2)
+
+
+check("gaze mode off, Gaze page open (wake): ours runs, uncalibrated", ask("wake 60"), "ok")
+check("the service knows ours has no calibration", wait(lambda: svc.checks.calibrated() is False, 6), True)
+check("a quick check is refused while ours has no calibration", svc.checks.start("quick", "test"),
+      "error our tracker isn't calibrated yet: use Calibrate")
+helper_state["reply"] = "ok on worn"
+check("gaze mode on: the calibration opens by itself", wait(lambda: check_state().get("kind") == "full", 6), True)
+check("it runs blind (no gaze from ours yet)", check_state().get("blind"), True)
+check("nothing says it can't open", any("can't open" in m for m in logs), False)
+# Live 2026-10-05: turning gaze mode on woke our tracker, and the calibration opened before
+# DON_DELAY of eyes had passed, so "the headset went on" came while it was open. That re-armed
+# it, and a second calibration opened as soon as the first ended.
+svc.checks.away, svc.checks.back_since = True, None
+
+check("dot 1: a click takes it", take_dot(0), True)
+check("the headset went on while it was open",
+      wait(lambda: not svc.checks.away, gazecheck.DON_DELAY + 2) and bool(svc.checks.check), True)
+t0, t1, yaw, pitch = eyes_state["points"][0]
+dot = gazecheck.check_dots("full", True)[0]
+check("its window is the look up to the click (about CHECK_WINDOW)",
+      abs((t1 - t0) - gazecheck.CHECK_WINDOW) < 0.15, True)
+check("ft-eyes got that dot's direction", (round(yaw, 3), round(pitch, 3)), (round(dot[0], 3), round(dot[1], 3)))
+
+eyes_state["fail"] = "fail the left eye was seen in only 3 frames"
+wait(lambda: check_state().get("i") == 1 and not check_state().get("done_at"), 3)
+time.sleep(gazecheck.CHECK_SETTLE + gazecheck.CHECK_WINDOW + 0.1)
+ask("calaccept")
+check("ft-eyes refusing a dot: its reason reaches the panel's note",
+      wait(lambda: "left eye in only 3 frames" in check_state().get("note", ""), 2), True)
+check("dot 2, second try: taken", take_dot(1), True)
+check("dot 3: taken", take_dot(2), True)
+
+check("all dots: ours fits its calibration (calib-fit)",
+      wait(lambda: eyes_state["cal"] is not None and not svc.checks.check, 4), True)
+check("the service sees it calibrated", wait(lambda: svc.checks.calibrated() is True, 4), True)
+check("and gaze mode stays on", "gaze off" in helper_state["heard"], False)
+check("and no second calibration opens", wait(lambda: svc.checks.check is not None, 3), False)
+check("one calibration in the log", sum(m.startswith("full check:") for m in logs), 1)
+
+print("FAILED: " + ", ".join(failures) if failures else "all passed", flush=True)
+svc.running = False
+time.sleep(0.7)
+shutil.rmtree(HOME, ignore_errors=True)
+os._exit(1 if failures else 0)
@@ -9,6 +9,7 @@
 # Options (piped, they go after "bash -s --"):
 #   --stable        the main branch: tested releases (the default for a new install)
 #   --experimental  the experimental branch: the newest features, less tested
+#   --branch NAME   another branch, such as a fix to test before it's released
 #   --dir DIR       where the repo goes (default ~/frametop)
 #   --clone-only    get or update the repo, but don't run install.sh
 #   --yes, --no-bluetooth   passed to install.sh (--yes also answers this script's question:
@@ -17,7 +18,7 @@ set -euo pipefail

 usage() {
  cat <<'EOF'
-usage: get.sh [--stable | --experimental] [--dir DIR] [--clone-only] [--yes] [--no-bluetooth]
+usage: get.sh [--stable | --experimental | --branch NAME] [--dir DIR] [--clone-only] [--yes] [--no-bluetooth]
 piped: curl -fsSL https://deejanuz.github.io/frametop/get.sh | bash -s -- [options]
 EOF
 }
@@ -31,6 +32,7 @@ main() {
    case $1 in
      --stable) branch=main ;;
      --experimental) branch=experimental ;;
+      --branch) branch=${2:?--branch needs a branch name}; shift ;;
      --dir) dir=${2:?--dir needs a folder}; shift ;;
      --clone-only) clone_only=1 ;;
      --yes) yes=1; pass+=("$1") ;;
@@ -80,6 +82,11 @@ main() {
    fi
  fi

+  if ! git ls-remote --exit-code --heads "$repo" "$branch" >/dev/null; then
+    echo "Frametop has no branch called $branch (or GitHub can't be reached)." >&2
+    return 1
+  fi
+
  if [ ! -e "$dir" ]; then
    echo "Cloning Frametop ($branch) into $dir"
    git clone --branch "$branch" "$repo" "$dir"
@@ -0,0 +1,68 @@
+---
+title: Install the Frametop Hand Recorder
+---
+
+# Install the Frametop Hand Recorder
+
+The Hand Recorder records your hands with the Steam Frame's tracking cameras for Frametop's open hand dataset ([DeeJanuz/frametop-hands](https://huggingface.co/datasets/DeeJanuz/frametop-hands) on Hugging Face). These are the Konsole commands to install it.
+
+> **Fixed in Frametop 0.2.1 (October 5, 2026):** the recorder now works on headsets without the Arcturus color passthrough module too. If you installed it earlier and the camera check stopped with "Not all of the headset's tracking cameras are running (ft-camd publishes only 2 of 4 mono cameras ...)", run the commands under [Update](#update).
+
+Join the [Frametop Discord](https://discord.gg/W3X9f7z3Bc) for questions and help with recording.
+
+For now the recorder runs inside Frametop's desktop, so these steps install Frametop first. A standalone recorder that runs from the SteamVR dashboard without Frametop is planned.
+
+## Before you start
+
+- You must be 18 or older, and for now you can't take part if you live in Illinois, Texas or Washington (USA). The [consent text](https://github.com/DeeJanuz/frametop/blob/main/hands/rec/CONSENT.md) explains what's recorded and what you agree to. The recorder shows it again before your first session.
+- You need a Steam Frame on the stable SteamOS release (not the beta), an internet connection, and a keyboard (Bluetooth, or the on-screen one).
+- You need a `sudo` password. If you've never set one, run `passwd` in Konsole first.
+- Recordings are several gigabytes per round, and uploading one needs about the same again free while it runs. `df -h ~` shows your free space.
+
+## Open Konsole
+
+1. In the launcher, choose Launch a program → Desktop.
+2. In the application menu, open System → Konsole.
+
+## 1. Install Frametop
+
+```
+curl -fsSL https://deejanuz.github.io/frametop/get.sh | bash -s -- --stable
+```
+
+This clones Frametop into `~/frametop` and runs its installer. The first run downloads 1–2 GB. The installer asks a few questions (gaze mode, the eye tracker, the Bluetooth fixes); the defaults are fine. At the end SteamVR restarts, which closes Konsole. If Frametop is already installed, this updates it.
+
+## 2. Install the Hand Recorder
+
+After SteamVR restarts, choose Launch a program → Desktop again, open Konsole, and run:
+
+```
+~/frametop/hands/rec/install.sh
+```
+
+This builds the camera broker, the hand tracker and the headset panel (the first build takes a few minutes), asks for your `sudo` password once to let the camera broker read the cameras, and adds Frametop Hand Recorder to the application menu.
+
+## 3. Record
+
+Open Frametop Hand Recorder from the desktop's application menu. It walks you through the consent text, a short checklist, the recording, a review of what you recorded, and the upload to Hugging Face. Nothing leaves the headset until you press Upload.
+
+## Update
+
+```
+curl -fsSL https://deejanuz.github.io/frametop/get.sh | bash -s -- --stable
+~/frametop/hands/rec/install.sh
+```
+
+Run the second command after SteamVR has restarted, as in the install.
+
+## Uninstall
+
+```
+~/frametop/hands/rec/install.sh uninstall
+```
+
+This removes the menu entry. Your recordings stay in `~/.local/share/frametop/hands/contrib`; delete that folder to remove them. To remove Frametop as well, follow [Uninstall](https://github.com/DeeJanuz/frametop#uninstall) in the README.
+
+## Help
+
+Ask in the [Frametop Discord](https://discord.gg/W3X9f7z3Bc), the [Frametop issues](https://github.com/DeeJanuz/frametop/issues), or the dataset's [discussion page](https://huggingface.co/datasets/DeeJanuz/frametop-hands/discussions). All three are public.
@@ -36,7 +36,7 @@ hands/run.sh uninstall

 Settings in `~/.config/frametop.conf` (`FT_<name>` in the environment overrides them), read when ft-camd and ft-hands start:

- `HANDS_SWAP_SIDES=auto` (the default): ft-hands tells from the hands which side camera is which, and corrects ft-camd's names when they're backwards (see "Which camera is which" below). `1` forces them exchanged and `0` forces ft-camd's names; ft-hands still checks and logs a warning if the hands disagree.
+- `HANDS_SWAP_SIDES=auto` (the default): ft-hands tells from the hands which side camera is which, and corrects ft-camd's names when they're backwards (see "Which camera is which" below). `1` forces them exchanged and `0` forces ft-camd's names; ft-hands still checks, and if the hands disagree it logs a warning and publishes the hands' answer as the truth (`sides.json`), so recordings are labelled right. The example config said `0` until 2026-10-05; `scripts/conf-migrate.sh` (run by `install.sh` and `hands/rec/install.sh`) turns that untouched line into `auto`.
 - `HANDS_CPUS=5,6,7`: the CPUs the model threads run on (below).
 - `HANDS_CAMERAS` (`auto`), `HANDS_BRIGHT` (`all`), `HANDS_BRIGHT_ON` (40), `HANDS_BRIGHT_OFF` (25): which cameras ft-hands tracks with, as `--cams`, `--bright`, `--bright-on` and `--bright-off` (see ft-hands). `HANDS_CAMERAS=mono` also keeps ft-camd off the colour cameras.
 - `HANDS_COLOR_LEFT` (`color_video0`), `HANDS_COLOR_CROP` (`subtract`): how the colour module's calibration maps onto its images, as `--color-left` and `--color-crop`.
@@ -56,13 +56,19 @@ ANSI = re.compile(r"\x1b\[[0-9;]*m")
 STAMP = re.compile(r"^\w{3} \w{3} \d{2} \d{4} (\d{2}:\d{2}:\d{2})\.\d+ (\w+): ?(.*)$")
 # Lines worth reading; anything else is skipped before the regexes (the log grows by MBs a day).
 KEYS = ("FPGA", "VCINT", "Created", "TrackingCameraInit", "Closing tracking camera", "Streaming",
-        "systemd suspend", "systemd resume", "XRService logging to", "Exiting XRService")
+        "systemd suspend", "systemd resume", "XRService logging to", "Exiting XRService", "ISP ")
+# XRService's numbering of its tracking cameras (the TrackingCameraInit index): ft-hands names
+# them this way too (track/main.cpp, cameras_from_xrservice_log).
+NAMES = ("slam_left", "slam_right", "upper_left", "upper_right")
 RE_PASSTHRU = re.compile(r"Passthrough connected but FPGA is (\S+) - loading VCINT")
 RE_INTERLEAVE = re.compile(r"Upper cameras FPGA interleaving support: (\d)")
 RE_TASKS = re.compile(r"Created (\d+) tasks \((\d+) tracking, (\d+) passthrough\)")
 RE_INIT = re.compile(r"TrackingCameraInit: index: (\d+)\. video device: /dev/video(\d+)")
 RE_STREAM = re.compile(r"Streaming resumed \(FPGA: (\S+), VC interleaving: (\w+)\)")
 RE_STATE = re.compile(r"FPGA state check: (\S+)")
+# Without the colour module XRService runs the side cameras through the ISP, as NV12 on other
+# capture pipes (vfe0 and vfe1), and the upper pair on vfe3 and vfe4.
+RE_ISP = re.compile(r"ISP (enabled|disabled) for tracking cameras")


 class LogState:
@@ -85,7 +91,7 @@ class LogState:
    def _new_episode(self, t):
        self.closed = False
        self.episode = {"start": t, "fpga_before": "", "vcint": "", "interleave": None, "tasks": None,
-                        "inits": {}, "stream": "", "failure": "", "evidence": []}
+                        "inits": {}, "stream": "", "isp": None, "failure": "", "evidence": []}
        if self.closed_at:
            self.episode["evidence"].append(self.closed_at)

@@ -146,6 +152,12 @@ class LogState:
            ep["interleave"] = int(m.group(1))
            ep["evidence"].append(short)
            return
+        m = RE_ISP.search(text)
+        if m:
+            ep = self._ep(t)
+            ep["isp"] = m.group(1) == "enabled"
+            ep["evidence"].append(short)
+            return
        m = RE_TASKS.search(text)
        if m:
            ep = self._ep(t)
@@ -184,6 +196,12 @@ class LogState:
        got = tuple(self.nodes[i] for i in (2, 3) if i in self.nodes)
        return got if len(got) == 2 else UPPER_NODES

+    def camera_map(self):
+        """{calibration name: /dev/videoN's N} from the latest camera start's TrackingCameraInit
+        lines (the whole log's when that start has none yet)."""
+        inits = (self.episode or {}).get("inits") or self.nodes
+        return {NAMES[i]: node for i, node in sorted(inits.items()) if 0 <= i < len(NAMES)}
+
    def tracking_nodes(self):
        got = tuple(self.nodes[i] for i in range(TRACKING) if i in self.nodes)
        return got if len(got) == TRACKING else SIDE_NODES + UPPER_NODES
@@ -353,7 +371,9 @@ def check(log=None, proc=True, ring=True, ring_path=None):
        status, reason = "unknown", "no XRService log in %s" % LOG_DIR
    out = {"log": path, "xrservice": None, "ring": None,
           "episode": state.snapshot()["episode"] if state else {},
-           "failure": state.snapshot()["failure"] if state else ""}
+           "failure": state.snapshot()["failure"] if state else "",
+           "map": {name: {"node": n, "pipe": pipe_name(n)} for name, n in state.camera_map().items()} if state else {},
+           "ring_missing": []}

    if proc:
        if pid is None:
@@ -389,13 +409,30 @@ def check(log=None, proc=True, ring=True, ring_path=None):
            evidence.append("ft-camd (pid %d, %s): %d mono cameras: %s" % (
                r["writer_pid"], "running" if r["alive"] else "stale ring", len(r["mono"]), names))
            if r["alive"] and len(r["mono"]) < TRACKING and status == "ok":
-                status, reason = "degraded", ("ft-camd publishes only %d of %d mono cameras (it started while "
-                                              "they were missing: restart it)" % (len(r["mono"]), TRACKING))
+                have = {c["node"] for c in r["mono"]}
+                want = state.tracking_nodes() if state else SIDE_NODES + UPPER_NODES
+                out["ring_missing"] = [n for n in want if n not in have]
+                status, reason = "degraded", ("ft-camd publishes only %d of %d mono cameras, missing %s" % (
+                    len(r["mono"]), TRACKING, " ".join("video%d" % n for n in out["ring_missing"]) or "?"))
    out.update(status=status, reason=reason, evidence=evidence,
               summary="ok" if status == "ok" else "%s: %s" % (status, reason))
    return out


+def pipe_name(node):
+    """The capture pipe behind /dev/videoN (msm_vfe3_video0 and so on), or ""."""
+    try:
+        with open("/sys/class/video4linux/video%d/name" % node) as f:
+            return f.read().strip()
+    except OSError:
+        return ""
+
+
+def is_ring_short(result):
+    """XRService runs all the tracking cameras, but ft-camd doesn't publish them all."""
+    return bool(result) and result.get("status") == "degraded" and bool(result.get("ring_missing"))
+
+
 def is_vcint_failure(result):
    return bool(result) and result.get("status") == "degraded" and result.get("reason") == VCINT_REASON

@@ -379,9 +379,15 @@ static bool resolve_block(cam_t *c)
    return true;
 }

+/*
+ * Through the ISP (no colour module), the near-black exposures come out all zeros,
+ * the same every time, so their dequeues change no buffer and get no votes. Such
+ * an index is left unmapped (slot -1): on_frame counts its frames as dark without
+ * reading them. Most of a camera's indices silent means it isn't streaming yet.
+ */
 static bool resolve_each(cam_t *c)
 {
-    int depth = c->maxindex + 1;
+    int depth = c->maxindex + 1, silent = 0;
    bool taken[MAX_SLOTS] = { false };

    for (int i = 0; i < depth; i++) {
@@ -396,6 +402,12 @@ static bool resolve_each(cam_t *c)
            }
        }

+        if (c->nobs[i] >= 3 && v1 <= 0.2 * c->nobs[i]) {
+            c->slot_of[i] = -1;
+            silent++;
+            continue;
+        }
+
        if (c->nobs[i] < 3 || best < 0 || taken[best] || v1 < 0.8 * c->nobs[i] || v2 > 0.3 * c->nobs[i])
            return false;

@@ -403,9 +415,14 @@ static bool resolve_each(cam_t *c)
        c->slot_of[i] = best;
    }

+    if (silent * 2 > depth)
+        return false;
+
    printf("%s: queue depth %d, buffers mapped one by one:", c->slug, depth);
    for (int i = 0; i < depth; i++)
-        printf(" %d", c->slot_of[i]);
+        c->slot_of[i] < 0 ? printf(" -") : printf(" %d", c->slot_of[i]);
+    if (silent)
+        printf(" (- : %d indices whose frames are all zeros, skipped as dark)", silent);
    printf("\n");
    return true;
 }
@@ -677,6 +694,12 @@ static void on_frame(cam_t *c, int64_t index, uint32_t seq, uint64_t ts, uint64_

    int slot = c->slot_of[index];

+    if (slot < 0) {     /* an index whose frames are all zeros (resolve_each): a dark one */
+        c->dark++;
+        c->rc->dropped++;
+        return;
+    }
+
    /* color runs at 60 fps: skip frames early enough that the asked rate holds, before any sync */
    if (c->color && color_fps > 0 && evtime - c->last_pub_ns < (uint64_t)(1e9 / color_fps) - 3000000) {
        c->paced++;
@@ -544,22 +544,26 @@ static void probe_cameras(xr_state_t *st)
 /*
 * qcom-camss can report bytesperline as the visible width while the VFE
 * writes a larger aligned pitch. sizeimage is right, so derive the pitch.
+ * For NV12, plane 0 normally holds the chroma rows after the luma (the side
+ * cameras through the ISP: 1056 wide, 1152 bytes a row); if it's too small for
+ * that, it holds the luma alone.
 */
 unsigned xr_camera_stride(const xr_camera_t *c)
 {
    if (!c->height || !c->planesize[0])
        return c->bytesperline ? c->bytesperline : c->width;

-    double bpp = 1.0;
-
-    if (c->pixfmt == V4L2_PIX_FMT_NV12 || c->pixfmt == V4L2_PIX_FMT_NV21)
-        bpp = 1.5;
-
-    unsigned s = (unsigned)((double)c->planesize[0] / ((double)c->height * bpp));
+    bool yuv = c->pixfmt == V4L2_PIX_FMT_NV12 || c->pixfmt == V4L2_PIX_FMT_NV21;
+    unsigned s = (unsigned)((double)c->planesize[0] / ((double)c->height * (yuv ? 1.5 : 1.0)));

    if (s >= c->width && s <= c->width * 4)
        return s;

+    s = (unsigned)(c->planesize[0] / c->height);
+
+    if (yuv && s >= c->width && s <= c->width * 4)
+        return s;
+
    return c->bytesperline ? c->bytesperline : c->width;
 }

@@ -591,7 +595,20 @@ void xr_camera_layout(const xr_camera_t *c, xr_layout_t *l)
    l->pitch = xr_camera_stride(c);
    l->width = c->width < l->pitch ? c->width : l->pitch;

-    if (c->pixfmt == V4L2_PIX_FMT_NV12 || c->pixfmt == V4L2_PIX_FMT_NV21) {
+    /*
+     * Without the colour module, XRService runs the side cameras through the
+     * ISP ("ISP enabled for tracking cameras (main VFE available)" in its log),
+     * and they come out NV12. They're mono sensors, so the luma is the image.
+     */
+    bool yuv = c->pixfmt == V4L2_PIX_FMT_NV12 || c->pixfmt == V4L2_PIX_FMT_NV21;
+
+    if (yuv && c->role && !strcmp(c->role, "tracking")) {
+        l->fmt  = XR_FMT_GREY8;
+        l->rows = c->height;
+        return;
+    }
+
+    if (yuv) {
        l->fmt  = XR_FMT_NV12;
        l->rows = c->height + c->height / 2;
    } else {
@@ -29,7 +29,7 @@ Every part runs in the dev container, as ft-hands and Input Settings do. The hos
 - **A tracking ft-hands** gives feedback through the hands file: which hands are seen, the palm's distance, the index tip. If none is running, the session starts `ft-hands --no-gestures --status 0` (unit `frametop-handrec-hands.service`). An ft-hands already running is used as it is.
 - **A recording ft-hands** runs once per recording part: `ft-hands --record-only --record DIR --record-for SECONDS --record-hz 10 --status 0 --sides auto|0|1` (below, "Side cameras"). It runs as a plain child process of the session, ended with SIGTERM when the part ends. SIGTERM ends ft-hands' loop, and `Recorder` writes out its queue when it's destroyed. In step mode (below) a part is one step's countdown and hold, so a take has one part per step (about 40 in the hand poses); in auto mode a take is one part, plus one more after each pause. `--record-for` is only a safety net.
  - Why a process per part rather than one kept alive and paused: measured in the dev container with `ft-ringplay`'s ring (2026-10-02), `ft-hands --record-only` writes its first set 16-27 ms after it starts and ends 4-6 ms after SIGTERM, so a new part costs nothing the 3 s countdown doesn't cover. Every reader already takes parts in order (`takes.py`, `validate.py` through the export's single stream, the labeller's `fhl_io.py`, numbering `sets-10.bin` after `sets-9.bin`), ft-hands needs no new control, and nothing is written while a step waits. Before the hold starts the session checks that the part has written a set (`Recorder.has_data`, up to 3 s more), so the hold is recorded from its first frame.
- **Side cameras.** ft-camd can name the two side cameras the wrong way round (hands/README.md, "Which camera is which"). The tracking ft-hands decides from the hands within about 2 s of them being in view (`HANDS_SWAP_SIDES=auto`, hands/track/sides.h) and publishes that in `/run/user/UID/frametop-hands/sides.json`. The session reads it (`sides.py`, `read_live`) and stores it in session.json `"sides"`. Each later part is recorded named right (`--sides 1` or `0`). Parts recorded before the decision use ft-camd's names (`--sides auto`; a record-only ft-hands can't tell), and readers rename them (`sides.py`). Each part's `names_swapped` goes into take.json `"parts"`. Without a tracking ft-hands nothing decides: `"swapped": null`, the names stay as recorded, and the maintainer's check (`hub_review check`, check_sides on a few sets per take) tells. `takes.py sides SESSION --set swapped|named` records a decision by hand.
+- **Side cameras.** ft-camd can name the two side cameras the wrong way round (hands/README.md, "Which camera is which"). The tracking ft-hands decides from the hands within about 2 s of them being in view (`HANDS_SWAP_SIDES=auto`, hands/track/sides.h) and publishes that in `/run/user/UID/frametop-hands/sides.json`. With `HANDS_SWAP_SIDES` forced to `0` or `1`, the hands still decide what's published once they disagree (state `"forced, disagrees"`; `read_live` also corrects an ft-hands built before that). The session reads it (`sides.py`, `read_live`) and stores it in session.json `"sides"`. Each later part is recorded named right (`--sides 1` or `0`). Parts recorded before the decision use ft-camd's names (`--sides auto`; a record-only ft-hands can't tell), and readers rename them (`sides.py`). Each part's `names_swapped` goes into take.json `"parts"`. Without a tracking ft-hands nothing decides: `"swapped": null`, the names stay as recorded, and the maintainer's check (`hub_review check`, check_sides on a few sets per take) tells. `takes.py sides SESSION --set swapped|named` records a decision by hand.
 - **ft-handpanel** runs as a child process with `--watch-stdin`. It shows the panel and logs poses during each take.
 - **The headset button's reader** is a thread of the session (`ButtonReader`, below), not a process.

@@ -457,11 +457,12 @@ class Backend(QObject):
        """Start stays off: the check found the cameras degraded (unless --ignore-cameras)."""
        return not self._ignore_cameras and self._camera.get("status") == "degraded"

-    def _check_now(self):
+    def _check_now(self, repair=False):
+        """repair (off this thread only: it may restart ft-camd, up to 15 s): see session.camera_check."""
        mod = self._runner()
        if not mod or self._session_options.get("dry_run"):
            return {"status": "unknown", "summary": "not checked (dry run)", "reason": "dry run", "evidence": []}
-        return mod.camera_check()
+        return mod.camera_check(repair=repair)

    @Slot()
    def checkCameras(self):
@@ -470,7 +471,7 @@ class Backend(QObject):
            return
        self._camera_busy = True
        self.cameraChanged.emit()
-        self._thread(lambda: self._cameraArrived.emit(self._check_now()))
+        self._thread(lambda: self._cameraArrived.emit(self._check_now(repair=True)))

    def _on_camera(self, result):
        self._camera = result
@@ -499,7 +500,7 @@ class Backend(QObject):
                end = time.monotonic() + RECHECK_FOR_S
                time.sleep(RECHECK_S * 2)
                while time.monotonic() < end:
-                    result = self._check_now()
+                    result = self._check_now(repair=True)
                    # Done once a new XRService (a new log) has opened its cameras, ok or not.
                    if result.get("status") in ("ok", "degraded") and result.get("log") != before:
                        break
@@ -23,6 +23,7 @@ case ${1:-install} in
    "$root/hands/rec/build.sh"
    echo "== 4/4 ft-camd's capabilities (asks for your password) and the menu entry"
    "$root/hands/run.sh" caps
+    "$root/scripts/conf-migrate.sh"   # HANDS_SWAP_SIDES=0, the old default, becomes auto
    fill_template "$root/hands/rec/ft-handrec.desktop" |
      on_frame "mkdir -p ~/.local/share/applications && cat > $entry"
    echo
@@ -1153,11 +1153,33 @@ def _steamvr_version():
    return ""


-def camera_check():
-    """camcheck.check() (the XRService log, its open cameras where readable, ft-camd's ring);
-    never raises: a failure is "unknown"."""
+_camd_restarted = set()   # ft-camd pids camera_check(repair=True) has restarted: once each
+
+
+def _unit_pid(unit):
+    r = subprocess.run(host_command("systemctl", "--user", "show", "-p", "MainPID", "--value", unit),
+                       capture_output=True, text=True, timeout=30)
    try:
-        return camcheck.check()
+        return int(r.stdout.strip() or 0)
+    except ValueError:
+        return 0
+
+
+def camera_check(repair=False):
+    """camcheck.check() (the XRService log, its open cameras where readable, ft-camd's ring);
+    never raises: a failure is "unknown". repair (the window, never during a session): when
+    XRService runs every tracking camera but the recorder's own ft-camd doesn't publish them all
+    (it started while some were missing), restart it, once per ft-camd, and check again."""
+    try:
+        r = camcheck.check()
+        pid = (r.get("ring") or {}).get("writer_pid")
+        if repair and camcheck.is_ring_short(r) and pid not in _camd_restarted and _unit_pid(CAMD_UNIT) == pid:
+            _camd_restarted.add(pid)
+            stop_unit(CAMD_UNIT)
+            start_camd()
+            r = camcheck.check()
+            r["evidence"].append("restarted ft-camd (pid %d) because it published only some of the cameras" % pid)
+        return r
    except Exception as e:
        return {"status": "unknown", "summary": "unknown: the camera check failed (%s)" % e,
                "reason": str(e), "evidence": []}
@@ -1169,6 +1191,10 @@ def camera_text(result):
        return ""
    if camcheck.is_vcint_failure(result):
        return camcheck.USER_TEXT
+    if camcheck.is_ring_short(result):
+        return ("The headset's tracking cameras are all running, but the recorder can't read some of them (%s). "
+                "Close the Hand Recorder, run ~/frametop/hands/rec/install.sh again, and open it again. If that "
+                "doesn't help, ask in the Frametop Discord." % result.get("reason", ""))
    return ("Not all of the headset's tracking cameras are running (%s). Restart SteamVR, or restart the "
            "headset if that doesn't fix it." % result.get("reason", ""))

@@ -1451,6 +1477,10 @@ class Session:
        cam = self._status.get("camera")
        if cam:
            self._session_json["camera"] = {"status": cam.get("status"), "reason": cam.get("reason", "")}
+            # which device each calibrated camera was (XRService's numbering) and whether XRService
+            # ran the side cameras through the ISP (no colour module): to check the names later
+            self._session_json["device"]["camera_map"] = cam.get("map") or {}
+            self._session_json["device"]["isp"] = (cam.get("episode") or {}).get("isp")
        if self.dry_run:
            self._session_json["dry_run"] = True
        if self.speed != 1:
@@ -1545,6 +1575,9 @@ class Session:
        self._save_session()
        self._log("side cameras: %s (%s, %s)" % ("SWAPPED" if swapped else "as named", new["decided_by"],
                                                  json.dumps(new["evidence"])))
+        if new["state"] == "forced, disagrees":
+            self._log("side cameras: HANDS_SWAP_SIDES in ~/.config/frametop.conf forces names the hands say are "
+                      "backwards; the recording goes by the hands. Set HANDS_SWAP_SIDES=auto.")

    def _sides_swapped(self):
        """session.json's decision: True, False, or None (not known yet)."""
@@ -125,4 +125,9 @@ def read_live(path=None, ring_path=None, now_ns=None):
                return None
        except OSError:
            return None
+    if (s.get("state") == "forced, disagrees" and s.get("swapped") is not None
+            and bool(s["swapped"]) == bool(s.get("names_swapped"))):
+        # An ft-hands built before 2026-10-06 kept a forced HANDS_SWAP_SIDES as the truth even
+        # when the hands disagreed. The hands are right: the truth is the other way round.
+        s = dict(s, swapped=not s["swapped"], decided_by="auto")
    return s
@@ -91,6 +91,29 @@ class RulesTest(unittest.TestCase):
        finally:
            shutil.rmtree(d)

+    def test_read_live_forced(self):
+        """HANDS_SWAP_SIDES=0 forced and the hands disagree: the hands are the truth, whether
+        ft-hands published them (built after 2026-10-06) or kept the forced value (before)."""
+        d = tempfile.mkdtemp()
+        try:
+            path = os.path.join(d, "sides.json")
+
+            def live(**kw):
+                s = dict(pid=1, ring_ino=0, mode="0", names_swapped=False,
+                         updated_ns=time.clock_gettime_ns(time.CLOCK_MONOTONIC), **kw)
+                with open(path, "w") as f:
+                    json.dump(s, f)
+                return sides.read_live(path)
+
+            self.assertEqual(live(state="forced", swapped=False, decided_by="config")["swapped"], False)
+            self.assertEqual(live(state="forced, agrees", swapped=False, decided_by="config")["swapped"], False)
+            old = live(state="forced, disagrees", swapped=False, decided_by="config")
+            self.assertEqual((old["swapped"], old["decided_by"]), (True, "auto"))
+            new = live(state="forced, disagrees", swapped=True, decided_by="auto")
+            self.assertEqual((new["swapped"], new["decided_by"]), (True, "auto"))
+        finally:
+            shutil.rmtree(d)
+

 class TakesTest(unittest.TestCase):
    """A swapped session: one take's parts recorded before the decision (ft-camd's names) and
@@ -226,6 +249,22 @@ class SessionSidesTest(unittest.TestCase):
        self.assertTrue(s._session_json["sides"]["reversed_from"]["swapped"])
        self.assertFalse(takes.read_json(os.path.join(self.tmp, "session.json"))["sides"]["swapped"])

+    def test_read_sides_forced(self):
+        """PR #4 on the dataset: HANDS_SWAP_SIDES=0 from the old example config, and the hands
+        disagree. The session takes the hands' answer, not the forced one."""
+        s = session.Session(os.path.join(self.tmp, "base"), {}, {}, "room", self.script, dry_run=True,
+                            hands_dir=self.tmp)
+        s.session_dir = self.tmp
+        s._session_json = {"sides": {"swapped": None}}
+        self.live(mode="0", state="forced", swapped=False, decided_by="config", names_swapped=False, evidence=None)
+        s._read_sides(force=True)
+        self.assertIs(s._sides_swapped(), False)
+        self.live(mode="0", state="forced, disagrees", swapped=False, decided_by="config", names_swapped=False)
+        s._read_sides(force=True)
+        self.assertIs(s._sides_swapped(), True)
+        self.assertEqual(s._session_json["sides"]["decided_by"], "auto")
+        self.assertEqual(s._session_json["sides"]["reversed_from"]["decided_by"], "config")
+
    def test_recorder_parts(self):
        calls = []

@@ -66,6 +66,22 @@ RESUME_OK = [L("12:30:00", "[SystemdInhibitor] Received systemd resume notificat
             for i, n in enumerate((9, 13, 6, 7))] + \
            [L("12:30:02", "[DeckardCaptureSource] Streaming resumed (FPGA: VCINT, VC interleaving: enabled)")]
 EXIT = [L("13:00:00", "XRService - main thread exiting"), L("13:00:00", "Exiting XRService")]
+# The colour module unplugged while SteamVR runs (2026-10-05 12:42): XRService reopens the
+# cameras with the side pair through the ISP on vfe0 and vfe1 (NV12); VCINT stays loaded, so the
+# upper pair stays on vfe2.
+UNPLUG = [L("12:42:25", "Received passthrough camera connection event (connected=0)"),
+          L("12:42:25", "[DeckardCaptureSource] Closing tracking camera interfaces camerasToUse: 1111"),
+          L("12:42:26", "FPGA state check: VCINT (register value: 0x00021211)"),
+          L("12:42:26", "Upper cameras FPGA interleaving support: 1 (Driver features available = 1 | VCINT loaded = 1)"),
+          L("12:42:26", "[buildMediaCtlSetupTasks] ISP enabled for tracking cameras (main VFE available)"),
+          L("12:42:26", "[buildMediaCtlSetupTasks] Created 4 tasks (4 tracking, 0 passthrough)")] + \
+         [L("12:42:26", "TrackingCameraInit: index: %d. video device: /dev/video%d. v4l subdevice: x" % (i, n))
+          for i, n in enumerate((0, 3, 6, 7))]
+# Started without the module (FrameEyeCameraFeed's layout): the upper pair on vfe3 and vfe4.
+NO_MODULE = [L("10:00:02", "[buildMediaCtlSetupTasks] ISP enabled for tracking cameras (main VFE available)"),
+             L("10:00:02", "[buildMediaCtlSetupTasks] Created 4 tasks (4 tracking, 0 passthrough)")] + \
+            [L("10:00:03", "TrackingCameraInit: index: %d. video device: /dev/video%d. v4l subdevice: x" % (i, n))
+             for i, n in enumerate((0, 3, 9, 13))]


 def state(lines):
@@ -128,6 +144,23 @@ class SyntheticLogs(unittest.TestCase):
        self.assertEqual(status, "degraded")
        self.assertEqual(reason, "only 2 of 4 tracking cameras running")

+    def test_camera_map_with_module(self):
+        st = state(START + GOOD_OPEN)
+        self.assertEqual(st.camera_map(), {"slam_left": 9, "slam_right": 13, "upper_left": 6, "upper_right": 7})
+
+    def test_module_unplugged(self):
+        st = state(START + GOOD_OPEN + UNPLUG)
+        self.assertEqual(st.verdict()[0], "ok")
+        self.assertIs(st.episode["isp"], True)
+        self.assertEqual(st.camera_map(), {"slam_left": 0, "slam_right": 3, "upper_left": 6, "upper_right": 7})
+        self.assertEqual(st.tracking_nodes(), (0, 3, 6, 7))
+
+    def test_started_without_module(self):
+        st = state(START + NO_MODULE)
+        self.assertEqual(st.verdict()[0], "ok")
+        self.assertEqual(st.camera_map(), {"slam_left": 0, "slam_right": 3, "upper_left": 9, "upper_right": 13})
+        self.assertEqual(st.upper_nodes(), (9, 13))
+
    def test_exited_and_empty(self):
        self.assertEqual(state(START + GOOD_OPEN + EXIT).verdict()[0], "unknown")
        self.assertEqual(state([]).verdict()[0], "unknown")
@@ -223,9 +256,9 @@ class RealLog(unittest.TestCase):
        self.assertEqual(out.getvalue().split("\n")[0], "ok")


-def make_ring(path, mono_names, alive=True):
+def make_ring(path, mono_names, alive=True, nodes=None):
    """A ring header as ft-camd writes it (camd/fhring.h), no frames."""
-    cams = [(b"og01a1b", n.encode(), 9 + i) for i, n in enumerate(mono_names)]
+    cams = [(b"og01a1b", n.encode(), nodes[i] if nodes else 9 + i) for i, n in enumerate(mono_names)]
    hb = time.clock_gettime_ns(time.CLOCK_MONOTONIC) if alive else 1
    data = bytearray(camcheck.RING_HDR.pack(b"FHRING01", 1, 0, len(cams), 0, 0, 4242, 0))
    struct.pack_into("<Q", data, 40, hb)
@@ -252,6 +285,19 @@ class Ring(unittest.TestCase):
        self.assertEqual(r["status"], "degraded")
        self.assertIn("ft-camd publishes only 2 of 4", r["reason"])

+    def test_ring_missing_the_side_cameras(self):
+        # an ft-camd from before NV12 support, without the colour module: only the upper pair
+        with open(self.log, "w") as f:
+            f.write("\n".join(START + NO_MODULE) + "\n")
+        make_ring(self.ring, ["og0ve10_5-003e_video9", "og0ve10_5-0060_video13"], nodes=[9, 13])
+        r = camcheck.check(log=self.log, proc=False, ring_path=self.ring)
+        self.assertEqual(r["status"], "degraded")
+        self.assertEqual(r["ring_missing"], [0, 3])
+        self.assertIn("missing video0 video3", r["reason"])
+        self.assertTrue(camcheck.is_ring_short(r))
+        self.assertFalse(camcheck.is_vcint_failure(r))
+        self.assertEqual(r["map"]["slam_left"]["node"], 0)
+
    def test_four_cameras_in_ring(self):
        make_ring(self.ring, ["a_video9", "b_video13", "c_video6", "d_video7", "a_video9_dk"])
        r = camcheck.check(log=self.log, proc=False, ring_path=self.ring)
@@ -34,8 +34,28 @@ from tools.show_set import index, read_set  # noqa: E402
 from tools import calib  # noqa: E402


-PIPES = {'msm_vfe3_video0': 'slam_left', 'msm_vfe4_video0': 'slam_right',    # as ft-hands maps them
+PIPES = {'msm_vfe3_video0': 'slam_left', 'msm_vfe4_video0': 'slam_right',    # with the colour module
         'msm_vfe2_video0': 'upper_left', 'msm_vfe2_video1': 'upper_right'}
+
+
+def ring_names():
+    """{/dev/videoN's N: calibration name} as ft-hands names them: by XRService's log
+    (camcheck.py), else by capture pipe (PIPES)."""
+    import camcheck
+    try:
+        by_log = {node: name for name, node in camcheck.read_log(camcheck.newest_log()).camera_map().items()}
+    except (OSError, ValueError):
+        by_log = {}
+    if by_log:
+        return by_log
+    out = {}
+    for path in os.listdir('/sys/class/video4linux'):
+        if path.startswith('video'):
+            with open('/sys/class/video4linux/%s/name' % path) as f:
+                name = PIPES.get(f.read().strip())
+            if name:
+                out[int(path[5:])] = name
+    return out
 PAIRS = {'side': ('slam_left', 'slam_right'), 'upper': ('upper_left', 'upper_right')}


@@ -100,8 +120,9 @@ def live_pairs(count, names=PAIRS['side']):
    if not ring.alive():
        sys.exit('ft-camd isn\'t running (no heartbeat)')
    cams = {}
+    names_of = ring_names()
    for c in ring.cams:
-        name = PIPES.get(open('/sys/class/video4linux/video%d/name' % c.node).read().strip())
+        name = names_of.get(c.node)
        if name and not c.name.endswith('-dark'):
            cams[name] = c
    for k in range(count):
@@ -27,7 +27,8 @@
 // default) tells from the hands it tracks (track/sides.h): once it's sure, it exchanges the two
 // cameras if they're backwards (the tracked views move with their images), and checks once
 // more. 0 and 1 force the naming (1: exchanged; --swap-sides is --sides 1); it still checks,
-// and warns if the hands disagree. The decision is published in /run/user/UID/frametop-hands/sides.json (see
+// and if the hands disagree it warns and publishes what the hands say as the truth ("swapped"),
+// so recordings are labelled right while tracking keeps the forced names. The decision is published in /run/user/UID/frametop-hands/sides.json (see
 // write_sides below) and, for recordings, in DIR/sides.json. --record-only can't tell (it tracks
 // nothing): under auto it records the ring's names as they are.
 //
@@ -63,7 +64,34 @@ namespace {

 volatile std::sig_atomic_t g_stop = 0, g_record = 0;

-// which calibrated camera each capture pipe carries (XRService's fixed routing)
+// Which calibrated camera each video device carries. XRService numbers its tracking cameras
+// (index 0 to 3: slam_left, slam_right, upper_left, upper_right) and logs the device each one
+// opened ("TrackingCameraInit: index: 0. video device: /dev/video9"). The devices depend on
+// the colour module: with it, the side cameras are on vfe3 and vfe4 and the upper pair on
+// vfe2; without it, XRService runs the side cameras through the ISP on vfe0 and vfe1, and the
+// upper pair on vfe3 and vfe4. So the running XRService's log decides; when it can't be read,
+// the capture pipes as they are with the module. {} if the log has no cameras.
+std::map<int, std::string> cameras_from_xrservice_log() {
+    static const char *const names[] = {"slam_left", "slam_right", "upper_left", "upper_right"};
+    const char *home = std::getenv("HOME");
+    std::ifstream in(std::string(home ? home : "") + "/.local/share/Steam/logs/xrservice.txt");
+    const std::string key = "TrackingCameraInit: index: ";
+    std::map<int, int> node_of;   // index -> N of /dev/videoN, from the latest camera start
+    std::string line;
+    while (std::getline(in, line)) {
+        if (line.find("XRService logging to") != std::string::npos) node_of.clear();
+        const auto at = line.find(key);
+        int index = -1, node = -1;
+        if (at != std::string::npos &&
+            std::sscanf(line.c_str() + at + key.size(), "%d. video device: /dev/video%d", &index, &node) == 2 &&
+            index >= 0 && index < 4)
+            node_of[index] = node;
+    }
+    std::map<int, std::string> out;
+    for (auto &[index, node] : node_of) out[node] = names[index];
+    return out;
+}
+
 const char *camera_for_pipe(int node) {
    char path[64], name[64] = "";
    std::snprintf(path, sizeof path, "/sys/class/video4linux/video%d/name", node);
@@ -302,6 +330,7 @@ int main(int argc, char **argv) {
    double decided_after_s = -1;
    if (sides_mode != "auto") truth = names_swapped, decided_by = sides_from, sides_state = "forced";
    std::string rec_dir;
+    std::string cams_json;   // which device each calibrated camera is (set below), for the sides files
    std::vector<std::pair<size_t, bool>> rec_names;   // from which recorded set on, names_swapped was what
    // DIR/sides.json beside a recording's sets.bin: how its side cameras are named. A set's
    // names are right when its names_swapped equals swapped (null: not known when recorded).
@@ -312,7 +341,8 @@ int main(int argc, char **argv) {
        write_file(rec_dir + "/sides.json",
                   "{\"swapped\": " + json_bool(truth) + ", \"decided_by\": " + json_str(truth ? decided_by : "") +
                       ", \"names_swapped\": [" + runs + "]" +
-                       (decision_evidence.empty() ? "" : ", \"evidence\": " + decision_evidence) + "}\n");
+                       (decision_evidence.empty() ? "" : ", \"evidence\": " + decision_evidence) +
+                       (cams_json.empty() ? "" : ", \"cameras\": " + cams_json) + "}\n");
    };
    auto start_recording = [&](const std::string &dir, std::string &e) {
        rec = std::make_unique<Recorder>();
@@ -340,19 +370,42 @@ int main(int argc, char **argv) {
    // (--with-color). Recorded names hold 15 characters, so "upper_right_dark" wouldn't fit.
    std::map<std::string, int> dark;
    std::map<std::string, Camera> used;
+    // ft-camd's cameras by XRService's numbering, else by capture pipe (see camera_for_pipe);
+    // ft-ringplay's (no device) by the name it gives
+    const std::map<int, std::string> by_log = cameras_from_xrservice_log();
+    const char *named_by = by_log.empty() ? "capture pipe" : "XRService's log";
    for (int i = 0; i < ring.cameras(); ++i) {
-        if (ring.camera(i).flags & FH_CAM_COLOR) {
-            const std::string name = "color_video" + std::to_string(ring.camera(i).node);
+        const fh_ring_cam_t &rc = ring.camera(i);
+        if (rc.flags & FH_CAM_COLOR) {
+            const std::string name = "color_video" + std::to_string(rc.node);
            dark[name] = i, color[name] = i;
            continue;
        }
-        // ft-camd's cameras by capture pipe; ft-ringplay's (no device) by the name it gives
-        const char *name = camera_for_pipe(ring.camera(i).node);
-        if (!name && ring.camera(i).node < 0) name = ring.camera(i).name;
-        if (!name || !calib.count(name)) continue;
-        if (ring.camera(i).flags & FH_CAM_DARK) dark[std::string(name) + "_dk"] = i;
-        else index[name] = i, used[name] = calib[name];
+        const auto it = by_log.find(rc.node);
+        const char *name = rc.node < 0                ? rc.name
+                           : !by_log.empty()          ? (it == by_log.end() ? nullptr : it->second.c_str())
+                                                      : camera_for_pipe(rc.node);
+        if (!name || !calib.count(name)) {
+            if (!(rc.flags & FH_CAM_DARK)) std::fprintf(stderr, "video%d (%s): not one of the calibrated cameras, left out\n", rc.node, rc.name);
+            continue;
+        }
+        if (int(rc.width) != calib[name].width || int(rc.height) != calib[name].height) {
+            std::fprintf(stderr, "video%d (%s) is %ux%u, but %s is calibrated at %dx%d: left out\n", rc.node, rc.name,
+                         rc.width, rc.height, name, calib[name].width, calib[name].height);
+            continue;
+        }
+        if (rc.flags & FH_CAM_DARK) {
+            dark[std::string(name) + "_dk"] = i;
+        } else if (index.count(name)) {
+            std::fprintf(stderr, "video%d (%s) would be %s too (video%d is): left out\n", rc.node, rc.name, name,
+                         ring.camera(index[name]).node);
+        } else {
+            index[name] = i, used[name] = calib[name];
+            cams_json += std::string(cams_json.empty() ? "" : ", ") + json_str(name) + ": {\"node\": " +
+                         std::to_string(rc.node) + ", \"ring\": " + json_str(rc.name) + "}";
+        }
    }
+    cams_json = "{\"named_by\": " + json_str(named_by) + ", \"cameras\": {" + cams_json + "}}";
    // ft-camd tells the side cameras' buffers apart by XRService's allocation order, which
    // some XRService restarts reverse (see the top).
    const bool have_sides = index.count("slam_left") && index.count("slam_right");
@@ -397,7 +450,7 @@ int main(int argc, char **argv) {
    }
    const bool switching = automatic && !color.empty();
    Cams mode = switching || color.empty() ? Cams::Mono : fixed;
-    std::printf("cameras:");
+    std::printf("cameras (by %s):", named_by);
    for (auto &[name, i] : index) std::printf(" %s=video%d", name.c_str(), ring.camera(i).node);
    for (auto &[name, i] : color) std::printf(" %s", name.c_str());
    std::printf("  tracking with %s%s  models: %s%s, %d threads on CPUs", cams_name(mode),
@@ -446,6 +499,7 @@ int main(int argc, char **argv) {
                       ", \"decided_after_s\": " + std::to_string(decided_after_s) +
                       ", \"evidence\": " + (decision_evidence.empty() ? "null" : decision_evidence) +
                       ", \"checking\": " + (checking ? side_check.json() : "null") +
+                       ", \"cameras\": " + (cams_json.empty() ? "null" : cams_json) +
                       ", \"updated_ns\": " + std::to_string(mono_ns()) + "}\n");
    };
    write_sides();
@@ -454,14 +508,16 @@ int main(int argc, char **argv) {
        const bool backwards = v == SideCheck::Swapped;   // relative to the names as they are now
        const double after = (now - start) / 1e9;
        const std::string ev = side_check.json(), text = side_check.summary();
-        if (sides_mode != "auto") {   // forced: only say so
+        if (sides_mode != "auto") {   // forced: the names stay; if the hands disagree, they're the truth
            const std::string what = (sides_from == "option" ? "--sides " : "HANDS_SWAP_SIDES=") + sides_mode;
            if (backwards)
                std::printf("side cameras: %s looks WRONG: the hands say the side cameras are the other way round (%s). "
-                            "Use auto.\n", what.c_str(), text.c_str());
+                            "Tracking keeps the forced names; recordings are labelled by the hands. Use auto.\n",
+                            what.c_str(), text.c_str());
            else
                std::printf("side cameras: %s agrees with the hands (%s)\n", what.c_str(), text.c_str());
            sides_state = backwards ? "forced, disagrees" : "forced, agrees";
+            if (backwards) truth = !names_swapped, decided_by = "auto", decided_after_s = after;
            decision_evidence = ev;
            checking = false;
        } else if (side_round == 0 || backwards) {
@@ -77,6 +77,8 @@ ACTION_LABELS = {
    "screens_toggle": "Hide/show desktop screens", "keyboard_toggle": "Open/close keyboard",
    "float_toggle": "Float window in VR / put it back", "dock_all": "Put all floating windows back",
    "pause_toggle": "Pause/resume Frametop (for VR games)",
+    "spin_next": "Spin the panels: next one on the right to the front",
+    "spin_prev": "Spin the panels: next one on the left to the front",
    "key": "Pass through as key",
    "none": "Do nothing",
 }
@@ -163,9 +165,10 @@ GAZE_MOUSE = {"precision": "Gaze precision: hold to steer with the mouse, releas
 MODIFIER_CODES = {29: 29, 97: 29, 42: 42, 54: 42, 56: 56, 100: 56, 125: 125, 126: 125}
 MODIFIER_NAMES = {29: "Ctrl", 42: "Shift", 56: "Alt", 125: "Meta"}
 # What a rules file without "key_bindings" gets (the relay's DEFAULT_KEY_BINDINGS): a Meta tap
-# opens Steam's menu, Meta+J and Meta+K click at the gaze, Meta+Shift+F floats a window.
+# opens Steam's menu, Meta+J and Meta+K click at the gaze, Meta+Shift+F floats a window,
+# Meta+Alt+Tab and Meta+Alt+Shift+Tab spin the panels.
 DEFAULT_KEY_BINDINGS = {"125": "steam_menu", "125+36": "gaze_left", "125+37": "gaze_right",
-                        "42+125+33": "float_toggle"}
+                        "42+125+33": "float_toggle", "56+125+15": "spin_next", "42+56+125+15": "spin_prev"}


 def key_bindings(rules):
@@ -30,7 +30,9 @@ gaze_quickcal = the gaze service's one-dot check ("quickcal" to @ft_gazed), sens
 layout_reset = put the desktop screens back in their saved layout, screens_toggle = hide or show the desktop screens,
 keyboard_toggle = open or close Frametop's keyboard, float_toggle = float the desktop window under the
 pointer (else the active one) in VR, or put it back if it floats, dock_all = put every floating
-window back (both to ft-floatd, @frametop_float), profile:NAME = switch to that profile (ft-layout
+window back (both to ft-floatd, @frametop_float), spin_next and spin_prev = turn every panel in the
+room about your head so the next one to the right or left comes to the front (ft-screens' "spin",
+Meta+Alt+Tab and Meta+Alt+Shift+Tab by default), profile:NAME = switch to that profile (ft-layout
 use NAME: its screens and apps; docs/profiles.md), steam_menu = open the SteamVR dashboard on
 Steam's menu, or close the dashboard (steam/ft-steam menu, through Steam's UI), pause_toggle =
 pause Frametop for a VR game, or resume it (game_pause.py), command:CMD = run
@@ -152,10 +154,10 @@ REL_X, REL_Y, REL_WHEEL, REL_MAX = 0x00, 0x01, 0x08, 0x0F
 SCROLLS = {0x06, REL_WHEEL, 0x0B, 0x0C}  # REL_HWHEEL, REL_WHEEL and their _HI_RES
 BTN_LEFT, BTN_RIGHT, BTN_MIDDLE, BTN_SIDE, BTN_EXTRA = 0x110, 0x111, 0x112, 0x113, 0x114
 KEY_LEFTMETA, KEY_RIGHTMETA = 125, 126
-KEY_VOLUMEDOWN, KEY_VOLUMEUP = 114, 115
-# Volume keys are remapped to KEY_MACRO29 and KEY_MACRO30: above 255, so X11 can't
-# carry them, and bound to nothing in the default keymap.
-VOLUME_STANDIN = {KEY_VOLUMEUP: 0x2AC, KEY_VOLUMEDOWN: 0x2AD}
+KEY_MUTE, KEY_VOLUMEDOWN, KEY_VOLUMEUP = 113, 114, 115
+# Volume keys are remapped to KEY_MACRO28, KEY_MACRO29 and KEY_MACRO30: above 255, so X11
+# can't carry them, and bound to nothing in the default keymap.
+VOLUME_STANDIN = {KEY_MUTE: 0x2AB, KEY_VOLUMEUP: 0x2AC, KEY_VOLUMEDOWN: 0x2AD}
 VOLUME_ORIGINAL = {v: k for k, v in VOLUME_STANDIN.items()}
 VOLUME_CODES = set(VOLUME_STANDIN) | set(VOLUME_ORIGINAL)
 BUS_USB, BUS_BLUETOOTH, BUS_VIRTUAL = 0x03, 0x05, 0x06
@@ -209,14 +211,16 @@ RULES_PATH = os.path.expanduser("~/.config/frametop-input.json")
 ACTIONS = ("left", "right", "middle", "back", "scroll_up", "scroll_down", "dashboard", "recenter",
           "pointer_toggle", "follow_toggle", "gaze_toggle", "gaze_precision", "gaze_drag", "gaze_left", "gaze_right",
           "gaze_quickcal", "sens_up", "sens_down", "layout_reset", "screens_toggle", "keyboard_toggle", "float_toggle",
-           "dock_all", "steam_menu", "pause_toggle", "key", "none")
+           "dock_all", "spin_next", "spin_prev", "steam_menu", "pause_toggle", "key", "none")
 # Gaze mode is a mouse feature: these never come from a controller button (docs/gaze-controllers.md).
 GAZE_ACTIONS = ("gaze_toggle", "gaze_precision", "gaze_drag", "gaze_left", "gaze_right", "gaze_quickcal")
 # Key combinations a rules file without "key_bindings" gets: a Meta tap opens Steam's menu, Meta+J
 # and Meta+K click at the gaze (free on the Frametop desktop, and apps don't use Meta),
-# Meta+Shift+F floats a window.
+# Meta+Shift+F floats a window, and Meta+Alt+Tab and Meta+Alt+Shift+Tab spin the panels around
+# you (ft-screens' lazy susan); not Meta+Tab, which is Cmd+Tab on a Mac reached through a remote
+# desktop like RustDesk.
 DEFAULT_KEY_BINDINGS = {"125": "steam_menu", "125+36": "gaze_left", "125+37": "gaze_right",
-                        "42+125+33": "float_toggle"}
+                        "42+125+33": "float_toggle", "56+125+15": "spin_next", "42+56+125+15": "spin_prev"}
 KEY_F24 = 194  # sent to the desktop with a Meta combination (see the top)
 # Key combinations ("key_bindings"): modifiers, each side's code folded into the left one's.
 MODIFIERS = {29: 29, 97: 29, 42: 42, 54: 42, 56: 56, 100: 56, 125: 125, 126: 125}
@@ -232,6 +236,9 @@ GAZED = "\0ft_gazed"
 FLOAT = "\0frametop_float"  # ft-floatd, floating windows in the Frametop desktop
 # Actions for ft-floatd ("float_toggle", "dock_all"): they don't need pointer mode.
 FLOAT_ACTIONS = {"float_toggle": b"float pointer", "dock_all": b"dock all"}
+# Actions for ft-screens: spin_next and spin_prev turn every panel in the room about your head,
+# so the next one to the right or left comes to the front. They don't need pointer mode either.
+SCREENS_ACTIONS = {"spin_next": b"spin next", "spin_prev": b"spin prev"}
 PROFILE = "profile:"  # "profile:NAME": switch to that profile (doesn't need pointer mode either)
 COMMAND = "command:"  # "command:CMD": run CMD (nor does this)

@@ -242,7 +249,7 @@ def known_action(a):


 def needs_pointer(a):
-    return a not in FLOAT_ACTIONS and a not in ("steam_menu", "pause_toggle") and not a.startswith((PROFILE, COMMAND))
+    return a not in FLOAT_ACTIONS and a not in SCREENS_ACTIONS and a not in ("steam_menu", "pause_toggle") and not a.startswith((PROFILE, COMMAND))


 def works_paused(a):
@@ -422,9 +429,13 @@ class Volume:

    def key(self, fd, code, value, now):
        if value == 1:
-            self.held = (fd, code)
-            self.step(code)
-            self.next_at = now + self.DELAY
+            if VOLUME_ORIGINAL.get(code, code) == KEY_MUTE:
+                subprocess.Popen(["wpctl", "set-mute", "@DEFAULT_AUDIO_SINK@", "toggle"],
+                                stdin=subprocess.DEVNULL, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+            else:
+                self.held = (fd, code)
+                self.step(code)
+                self.next_at = now + self.DELAY
        elif value == 0 and self.held == (fd, code):
            self.release()

@@ -925,6 +936,13 @@ def main():
                except OSError:
                    pass  # the Frametop desktop isn't running
                log(action)
+        elif action in SCREENS_ACTIONS:
+            if value == 1:
+                try:
+                    screens_sock.sendto(SCREENS_ACTIONS[action], SCREENS)
+                except OSError:
+                    pass  # the Frametop desktop isn't running
+                log(action)
        elif state["pointer"]:
            state["pointer"].action(action, value, now, source)

@@ -206,7 +206,7 @@ def check(label, got, want):
        failures.append(label)


-META, RMETA, SHIFT, CTRL, RCTRL, A, F, J, P = 125, 126, 42, 29, 97, 30, 33, 36, 25
+META, RMETA, SHIFT, CTRL, RCTRL, ALT, A, F, J, P, TAB = 125, 126, 42, 29, 97, 56, 30, 33, 36, 25, 15
 F24 = ["key 194 1", "key 194 0"]


@@ -265,6 +265,20 @@ def tests():
    key(META, 1); key(J, 1); key(J, 0); key(META, 0)
    check("resumed: Meta+J is a combination again", typed(), ["key 125 1"] + F24 + ["key 125 0"])

+    use(None)  # the defaults: Meta+Alt+Tab and Meta+Alt+Shift+Tab spin the panels (ft-screens)
+    key(META, 1); key(ALT, 1); key(TAB, 1); key(TAB, 0); key(ALT, 0); key(META, 0)
+    got = typed()
+    check("Meta+Alt+Tab (default): spin next", [m for m in got if m.startswith("spin")], ["spin next"])
+    check("Meta+Alt+Tab: Tab isn't typed", [m for m in got if m.startswith("key 15 ")], [])
+    key(META, 1); key(ALT, 1); key(SHIFT, 1); key(TAB, 1); key(TAB, 0); key(SHIFT, 0); key(ALT, 0); key(META, 0)
+    check("Meta+Alt+Shift+Tab (default): spin prev", [m for m in typed() if m.startswith("spin")], ["spin prev"])
+    pause("on")
+    key(META, 1); key(ALT, 1); key(TAB, 1); key(TAB, 0); key(ALT, 0); key(META, 0)
+    check("paused: Meta+Alt+Tab doesn't spin", [m for m in typed() if m.startswith("spin")], [])
+    pause("off")
+    check("spinning works without pointer mode", (relay.needs_pointer("spin_next"), relay.needs_pointer("spin_prev")),
+          (False, False))
+
    check("an empty command isn't an action", relay.known_action("command:  "), False)
    check("steam_menu, pause_toggle and commands work without pointer mode",
          (relay.needs_pointer("steam_menu"), relay.needs_pointer("pause_toggle"), relay.needs_pointer("command:ls")),
@@ -75,7 +75,7 @@ step "3/10 input relay (keeps Bluetooth mice working in SteamVR, device roles, b

 step "4/10 3D mouse: SteamVR driver"
 "$root/pointer/driver/build.sh"
-"$root/pointer/driver/install.sh" install 2>&1 | grep -v xdg-open
+"$root/pointer/driver/install.sh" install

 step "5/10 3D mouse: pointer helper service"
 "$root/pointer/helper/build.sh"
@@ -93,6 +93,7 @@ step "7/10 multi-screen desktop (ft-screens), Frametop Input Settings, and Frame
 "$root/remote/install.sh"
 on_frame "sed -i 's/^POINTER=0/POINTER=1/' ~/.config/frametop.conf; grep -q '^POINTER=' ~/.config/frametop.conf || echo 'POINTER=1' >> ~/.config/frametop.conf"
 echo "the launcher's Desktop entry now opens the multi-screen desktop; 3D mouse on (POINTER=1 in ~/.config/frametop.conf)"
+"$root/scripts/conf-migrate.sh"

 step "8/10 gaze mode (optional, experimental: the pointer goes where you look)"
 gaze=0
@@ -0,0 +1,3 @@
+#!/bin/bash
+# Hide/Show Screens' own program (see ft-layout-reset).
+exec "$(dirname "$(readlink -f "$0")")/ft-layout" toggle "$@"
@@ -0,0 +1,4 @@
+#!/bin/bash
+# Reset Screen Layout's own program. Steam lists menu entries by program, so entries that
+# shared ft-layout (with different arguments) launched as one.
+exec "$(dirname "$(readlink -f "$0")")/ft-layout" apply "$@"
@@ -534,7 +534,8 @@ def capture_screens():
 # ---------------------------------------------------------------- gamescope (dashboard panels)

 def vrcmd(*args, timeout=10):
-    env = dict(os.environ, LD_LIBRARY_PATH=os.path.dirname(VRCMD))
+    # SteamVR's config folder: in the desktop, XDG_CONFIG_HOME is its own (docs/design.md).
+    env = dict(os.environ, LD_LIBRARY_PATH=os.path.dirname(VRCMD), XDG_CONFIG_HOME=os.path.expanduser("~/.config"))
    try:
        return subprocess.run([VRCMD, *args], capture_output=True, text=True, timeout=timeout, env=env).stdout
    except (OSError, subprocess.TimeoutExpired):
@@ -14,6 +14,10 @@ frame="$root/scripts/frame.sh"
 src=$FRAME_REPO/pointer/driver
 dest='$HOME/.local/share/frametop/ft_pointer'  # expanded on the Frame, in the commands below
 reg='/opt/steamvr/bin/linuxarm64/vrpathreg'
+# SteamVR's tools with SteamVR's config folder and libraries. A terminal in the Frametop desktop
+# has XDG_CONFIG_HOME=~/.config/frametop (session/frametop-session.sh), where vrpathreg finds no
+# registry, so it made one there that SteamVR never reads.
+steamvr='env XDG_CONFIG_HOME=$HOME/.config LD_LIBRARY_PATH=/opt/steamvr/bin/linuxarm64'  # expanded on the Frame

 case ${1:-install} in
  install)
@@ -21,6 +25,11 @@ case ${1:-install} in
    # Replacing the files of a driver SteamVR has loaded leaves its input bindings in a bad
    # state (the 3D mouse no longer gets the laser) until SteamVR restarts, so an unchanged
    # driver is left alone.
+    # A registry an earlier install made in the desktop's config folder (see steamvr above) has
+    # no SteamVR in it, and hid SteamVR from OpenVR programs started in the desktop
+    # (VRInitError_Init_InstallationNotFound): it goes.
+    # vrpathreg runs 'xdg-open vrmonitor://driverinstalled' for SteamVR's desktop monitor, which
+    # the Frame doesn't have, so the desktop said "could not read file": a stand-in takes it.
    "$frame" --host "set -e; test -f $src/build/driver_ft_pointer.so
 rm -rf $dest.new; mkdir -p $dest.new/bin/linuxarm64
 cp -r $src/ft_pointer/. $dest.new/
@@ -31,15 +40,22 @@ else
  rm -rf $dest; mv $dest.new $dest
  echo 'installed; restart SteamVR to load it'
 fi
-LD_LIBRARY_PATH=/opt/steamvr/bin/linuxarm64 $reg adddriver $dest
-LD_LIBRARY_PATH=/opt/steamvr/bin/linuxarm64 $reg show | grep -A3 -i 'external'" ;;
+stray=\$HOME/.config/frametop/openvr/openvrpaths.vrpath
+if grep -qs '\"jsonid\" : \"vrpathreg\"' \$stray && grep -qsE '\"runtime\"[[:space:]]*:[[:space:]]*null' \$stray; then
+  rm -f \$stray; rmdir \$HOME/.config/frametop/openvr 2>/dev/null || true
+  echo 'removed a SteamVR path registry an earlier install left in ~/.config/frametop/openvr'
+fi
+noopen=\$(mktemp -d); trap 'rm -rf \$noopen' EXIT
+printf '#!/bin/sh\nexit 0\n' > \$noopen/xdg-open; chmod +x \$noopen/xdg-open
+PATH=\$noopen:\$PATH $steamvr $reg adddriver $dest
+$steamvr $reg show | grep -A3 -i 'external'" ;;
  uninstall)
-    "$frame" --host "LD_LIBRARY_PATH=/opt/steamvr/bin/linuxarm64 $reg removedriver $dest; rm -rf $dest; echo 'removed; restart SteamVR to unload it'" ;;
+    "$frame" --host "$steamvr $reg removedriver $dest; rm -rf $dest; echo 'removed; restart SteamVR to unload it'" ;;
  send)
    "$frame" --host "python3 -c 'import socket,sys; s=socket.socket(socket.AF_UNIX,socket.SOCK_DGRAM); s.sendto(sys.argv[1].encode(), \"\\0ft_pointer\")' $(printf %q "${2:?command}")" ;;
-  probe) "$frame" -C pointer/probe 'LD_LIBRARY_PATH=/opt/steamvr/bin/linuxarm64 ./build/vrprobe' ;;
+  probe) "$frame" -C pointer/probe "$steamvr ./build/vrprobe" ;;
  aimhere)
-    read -r yaw pitch < <("$frame" -C pointer/probe 'LD_LIBRARY_PATH=/opt/steamvr/bin/linuxarm64 ./build/vrprobe' | sed -n 's/^head yaw = \([-0-9.]*\) pitch = \([-0-9.]*\)$/\1 \2/p')
+    read -r yaw pitch < <("$frame" -C pointer/probe "$steamvr ./build/vrprobe" | sed -n 's/^head yaw = \([-0-9.]*\) pitch = \([-0-9.]*\)$/\1 \2/p')
    [ -n "${yaw:-}" ] || { echo "head pose not valid (headset off?)" >&2; exit 1; }
    "$0" send "aim $yaw $pitch" && echo "aimed at yaw $yaw pitch $pitch" ;;
  log) "$frame" --host "grep -iE 'ft_pointer' ~/.local/share/Steam/logs/vrserver.txt | tail -n ${2:-20}" ;;
@@ -346,6 +346,20 @@ static void handle_vr_event(const struct ft_event *e, void *data) {
    if (e->screen < 0 || e->screen >= MAX_SCREENS || !s->screens[e->screen]) return;
    struct screen *sc = s->screens[e->screen];
    struct wlr_surface *surface = sc->toplevel->base->surface;
+    if (e->type == FT_FRONT) {
+        // A spin brought this panel to the front: typing goes to it, as after a click there,
+        // and ft-floatd makes its window (or the top one on a screen) KWin's active window.
+        wlr_seat_keyboard_notify_enter(s->seat, surface, NULL, 0, NULL);
+        s->keys_clicked = true;
+        char msg[32];
+        snprintf(msg, sizeof msg, "front %d", e->screen + 1);
+        struct sockaddr_un addr = {.sun_family = AF_UNIX};
+        const char name[] = "frametop_float";
+        memcpy(addr.sun_path + 1, name, sizeof name - 1);
+        sendto(s->relay_fd, msg, strlen(msg), MSG_DONTWAIT, (struct sockaddr *)&addr,
+               offsetof(struct sockaddr_un, sun_path) + 1 + sizeof name - 1);
+        return;
+    }
    const uint32_t t = now_ms();
    const double x = e->x / s->scale[e->screen], y = e->y / s->scale[e->screen];  // KWin's units
    switch (e->type) {
@@ -459,7 +459,21 @@ void Hide() {
 bool Shown() { return g_shown; }

 void SetLasers(bool on) {
-    if (Create()) vr::VROverlay()->SetOverlayFlag(g_overlay, vr::VROverlayFlags_MakeOverlaysInteractiveIfVisible, on);
+    static vr::VROverlayHandle_t set = vr::k_ulOverlayHandleInvalid;  // the overlay `was` is for
+    static bool was = false;
+    if (!Create() || (set == g_overlay && was == on)) return;
+    set = g_overlay, was = on;
+    vr::VROverlay()->SetOverlayFlag(g_overlay, vr::VROverlayFlags_MakeOverlaysInteractiveIfVisible, on);
+}
+
+bool Aimed(const vr::HmdMatrix34_t &laser) {
+    if (!g_shown) return false;
+    vr::VROverlayIntersectionParams_t in{};
+    in.eOrigin = vr::TrackingUniverseStanding;
+    in.vSource = {laser.m[0][3], laser.m[1][3], laser.m[2][3]};
+    in.vDirection = {-laser.m[0][2], -laser.m[1][2], -laser.m[2][2]};
+    vr::VROverlayIntersectionResults_t out{};
+    return vr::VROverlay()->ComputeOverlayIntersection(g_overlay, &in, &out);
 }

 void Poll(void (*handle)(const Event &, void *), void *data) {
@@ -26,6 +26,8 @@ const vr::HmdMatrix34_t &Pose();
 void EndDragBy(uint32_t device);
 // Controllers' lasers work the panel with the dashboard closed, like the screens'.
 void SetLasers(bool on);
+// A laser (its pose, aiming along -z) points at the panel.
+bool Aimed(const vr::HmdMatrix34_t &laser);
 // The panel's input: key presses and releases, and Closed for its Close key.
 void Poll(void (*handle)(const Event &, void *), void *data);
 void Destroy();
@@ -12,9 +12,7 @@
 //   - a resize tab on the bottom right corner: drag it to set the width (the height
 //     follows the screen's resolution).
 //   - a reset button left of the bar: every screen back in its layout, around where you
-//     are now (`ft-layout apply`, like Meta+Shift+R). Where the screens leave the
-//     controllers to a VR game, aiming a controller at it turns SteamVR's laser mouse on for
-//     that button alone (UpdateResetLaser), so it can be clicked in a game.
+//     are now (`ft-layout apply`, like Meta+Shift+R).
 //   The controls are translucent, like SteamVR's own, and brighten under a laser. They
 //   are invisible until a laser (a controller's, or the 3D mouse's) lands on or passes very close to
 //   one of them (UpdateControls).
@@ -44,7 +42,10 @@
 //     default it's off while a game (a scene app) runs: the screens stay up over the game,
 //     the controllers stay in it, and the 3D mouse (its own laser mode) or the dashboard
 //     works the screens. Modes: always, outside_games (default), dashboard (never on its
-//     own; also for flatscreen games, which aren't scene apps).
+//     own; also for flatscreen games, which aren't scene apps). Where the mode leaves the
+//     controllers to the game, pointing a controller at a panel (a screen, a floating window
+//     and its popups, their controls, the keyboard) turns the laser on for it until you
+//     point away, like SteamVR's own floating windows (UpdateAim).
 //   - during a VR game the screens hide unless the dashboard is open (g_inGames, default),
 //     or stay visible over it; the hotkey still shows them.
 //   - paused ("pause on", from the input relay when Frametop pauses for a VR game,
@@ -189,8 +190,12 @@ Mat TipOffset(vr::TrackedDeviceIndex_t dev) {
    Tip tip{model, Identity(), false, now};
    vr::RenderModel_ControllerMode_State_t mode{};
    vr::RenderModel_ComponentState_t state{};
-    if (model[0] && vr::VRRenderModels()->GetComponentStateForDevicePath(model, vr::k_pch_Controller_Component_Tip,
-                                                                          vr::k_ulInvalidInputValueHandle, &mode, &state))
+    // GetComponentState, not GetComponentStateForDevicePath: without an input source handle
+    // the latter fails for every component while a VR game runs, and the rays came from the
+    // pose, 40 degrees above the laser. The tip doesn't move with the buttons.
+    vr::VRControllerState_t buttons{};
+    if (model[0] && vr::VRRenderModels()->GetComponentState(model, vr::k_pch_Controller_Component_Tip, &buttons, &mode,
+                                                            &state))
        tip.offset = state.mTrackingToComponentLocal, tip.found = true;
    cache[dev] = tip;
    return tip.offset;
@@ -237,7 +242,7 @@ constexpr double kRollSnap = 2.5;    // degrees from level where rolling snaps l
 constexpr double kRollStep = 5;      // degrees per scroll notch on the roll button
 constexpr float kChromeIdle = 0.55f; // the controls' opacity without a laser on them
 constexpr long kControlsLinger = 35; // ticks (~0.4 s) the controls stay after a laser leaves
-constexpr long kResetLinger = 45;    // ticks (~0.5 s) the reset button keeps the laser mouse on
+constexpr long kAimLinger = 25;      // ticks (~0.3 s) a panel keeps the laser on after the aim leaves it
 long g_tick = 0;                     // ft_vr_poll calls
 bool g_vr = false;                   // connected to SteamVR (ft-screens --no-vr runs without it)
 constexpr vr::TrackedDeviceIndex_t kNone = vr::k_unTrackedDeviceIndexInvalid;
@@ -275,8 +280,7 @@ struct Screen {
    float controls = 0;                       // the controls' fade, 0 (hidden) .. 1
    bool controlsUp = false;                  // the controls' overlays are shown
    long nearUntil = 0;                       // a laser was near the controls until this tick
-    long resetNearUntil = 0;                  // a hand controller aimed at the reset button until this tick
-    bool resetLaser = false;                  // the reset button has MakeOverlaysInteractiveIfVisible
+    long aimUntil = 0;                        // a hand controller pointed at it until this tick (UpdateAim)
    vr::TrackedDeviceIndex_t pinTarget = kNone;  // moving: rides on this controller when let go
    vr::TrackedDeviceIndex_t onWrist = kNone;    // moving: the laser is in this controller's ring
    bool barLit = false;
@@ -910,26 +914,20 @@ void UpdateAttention() {


 // Controllers' lasers on the screens (see the top): the flag follows the mode and whether a
-// VR game runs.
+// VR game runs, and where the mode leaves the controllers to the game, whether one points at
+// the panel (UpdateAim).
+bool LasersByMode() { return g_lasers == Lasers::Always || (g_lasers == Lasers::OutsideGames && !g_gameRunning); }
+long g_keyboardAimUntil = 0;
+
 void UpdateLasers() {
-    const bool want = g_lasers == Lasers::Always || (g_lasers == Lasers::OutsideGames && !g_gameRunning);
+    const bool byMode = LasersByMode();
    for (auto &[i, s] : g_screens) {
+        const bool want = byMode || (s.visible && g_tick < s.aimUntil);
        if (s.lasers == want) continue;
        s.lasers = want;
        vr::VROverlay()->SetOverlayFlag(s.overlay, vr::VROverlayFlags_MakeOverlaysInteractiveIfVisible, want);
    }
-}
-
-// The reset button in a VR game (or the dashboard mode), where the screens don't keep
-// SteamVR's laser mouse on: aiming a hand controller at it turns the laser mouse on for that
-// button alone, so the trigger clicks it, and the game gets the controllers back
-// kResetLinger ticks after the aim leaves it (a wider zone than the one that turns it on).
-void UpdateResetLaser(Screen &s) {
-    const bool want = s.resetButton != vr::k_ulOverlayHandleInvalid && s.visible && !s.lasers &&
-                      g_tick < s.resetNearUntil;
-    if (want == s.resetLaser) return;
-    s.resetLaser = want;
-    vr::VROverlay()->SetOverlayFlag(s.resetButton, vr::VROverlayFlags_MakeOverlaysInteractiveIfVisible, want);
+    if (keyboard::Shown()) keyboard::SetLasers(byMode || g_tick < g_keyboardAimUntil);
 }

 // The distance from a laser's line to a point ahead of it, or -1 when it's behind.
@@ -947,11 +945,10 @@ double RayDistance(const Mat &d, const Mat &c) {
 // kControlsLinger ticks after it leaves, and while in use.
 void UpdateControls() {
    std::vector<Mat> lasers;
-    std::vector<bool> hands;  // the laser is a hand controller's (not the 3D mouse's)
    for (vr::TrackedDeviceIndex_t i = 1; i < vr::k_unMaxTrackedDeviceCount; ++i) {
        Mat d;
        if (vr::VRSystem()->GetTrackedDeviceClass(i) == vr::TrackedDeviceClass_Controller && LaserPose(i, &d))
-            lasers.push_back(d), hands.push_back(IsHandController(i));
+            lasers.push_back(d);
    }
    for (auto &[i, s] : g_screens) {
        Mat p;
@@ -977,16 +974,7 @@ void UpdateControls() {
                    break;
                }
            }
-            if (s.resetButton != vr::k_ulOverlayHandleInvalid && !s.lasers) {
-                const Mat c = Mul(p, offsets[6]);
-                const double aim = s.grip * (s.resetLaser ? 2.0 : 0.9);
-                for (size_t k = 0; k < lasers.size(); ++k) {
-                    const double r = RayDistance(lasers[k], c);
-                    if (hands[k] && r >= 0 && r <= aim) s.resetNearUntil = g_tick + kResetLinger;
-                }
-            }
        }
-        UpdateResetLaser(s);
        const bool inUse = s.drag != Drag::None || std::any_of(std::begin(s.hover), std::end(s.hover), [](bool h) { return h; });
        const bool want = s.visible && (inUse || g_tick < s.nearUntil);
        // The controls stay shown while their screen is, just fully transparent when not
@@ -1020,19 +1008,21 @@ void SendFloat(const std::string &msg) {
        std::printf("to ft-floatd: %s\n", msg.c_str());
 }

-// A new panel: the pointer helper reads SteamVR's list of panels only every 20 s, so it's told
-// at once ("overlay <key>"), or the mouse couldn't click a menu until then.
-void AnnounceOverlay(const char *key) {
+// To the pointer helper (@ft_pointer_helper), from an unbound socket.
+void SendPointer(const std::string &msg) {
    static const int fd = socket(AF_UNIX, SOCK_DGRAM | SOCK_CLOEXEC | SOCK_NONBLOCK, 0);
    sockaddr_un addr{};
    addr.sun_family = AF_UNIX;
    const char name[] = "ft_pointer_helper";
    std::memcpy(addr.sun_path + 1, name, sizeof name - 1);
-    const std::string msg = std::string("overlay ") + key;
    sendto(fd, msg.data(), msg.size(), MSG_DONTWAIT, reinterpret_cast<sockaddr *>(&addr),
           socklen_t(offsetof(sockaddr_un, sun_path) + 1 + sizeof name - 1));
 }

+// A new panel: the pointer helper reads SteamVR's list of panels only every 20 s, so it's told
+// at once ("overlay <key>"), or the mouse couldn't click a menu until then.
+void AnnounceOverlay(const char *key) { SendPointer(std::string("overlay ") + key); }
+
 // Where a device's ray meets the screen's plane, in the screen's x (right) and y (up),
 // metres from its centre.
 bool RayOnPlane(const Mat &p, const Mat &d, double *x, double *y) {
@@ -1419,6 +1409,7 @@ struct Press {
    double x = 0, y = 0;                      // ...and where on it, in buffer pixels
    double distance = 1;                      // from the laser's start to the last panel it met
    long upAt = -1;                           // the pointer helper saw left come up: release it at this tick
+    int64_t idleSince = -1;                   // the pressing controller has held nothing since (ms, ReleaseStuck)
 };
 Press g_press;
 vr::VROverlayHandle_t g_catcher = vr::k_ulOverlayHandleInvalid;
@@ -1455,6 +1446,47 @@ void ReleaseAway(uint32_t button, void (*handle)(const struct ft_event *, void *
    handle(&e, data);
 }

+// Whether a hand controller holds anything (a button down): 1 yes, 0 no, -1 unknown. SteamVR
+// answers overlay apps only while a VR game runs (checked 2026-10-04); outside games it can't
+// say. The Frame controller's axes have no types, so the buttons are all there is.
+int ControllerHolds(vr::TrackedDeviceIndex_t dev) {
+    vr::VRControllerState_t st{};
+    if (!vr::VRSystem()->GetControllerState(dev, &st, sizeof st)) return -1;
+    return st.ulButtonPressed ? 1 : 0;
+}
+
+// Releases SteamVR never sends. Pausing, or hiding the screen a button went down on, takes the
+// laser off it mid-click (the pause gesture's second thumbstick click does that), and SteamVR's
+// laser mouse then forgets the button: no release comes, the catcher stayed up, and the game
+// never got its controllers back (2026-10-04). So a held button is released here when it has
+// no visible screen to come up on, or when its hand controller has held nothing for kStuckMs
+// (only known during VR games, where the lost release took the game's controllers).
+// The pointer helper's virtual controller has its own word for that ("up").
+constexpr int64_t kStuckMs = 1000;
+void ReleaseStuck(void (*handle)(const struct ft_event *, void *), void *data) {
+    if (!g_press.buttons) {
+        g_press.idleSince = -1;
+        return;
+    }
+    const char *why = nullptr;
+    const auto it = g_screens.find(g_press.screen);
+    if (g_paused) why = "paused";
+    else if (g_press.screen >= 0 && (it == g_screens.end() || !it->second.visible)) why = "its screen hid";
+    else if (IsHandController(g_press.device)) {
+        const int64_t now = NowMs();
+        if (ControllerHolds(g_press.device) != 0) g_press.idleSince = -1;
+        else if (g_press.idleSince < 0) g_press.idleSince = now;
+        else if (now - g_press.idleSince >= kStuckMs) why = "the controller holds nothing";
+    }
+    if (!why) return;
+    std::printf("a held button can't come up on a screen (%s): released\n", why);
+    const vr::TrackedDeviceIndex_t dev = g_press.device;
+    for (uint32_t b = 0; b < 32; ++b)
+        if (g_press.buttons & (1u << b)) ReleaseAway(BTN_LEFT + b, handle, data);
+    g_press.buttons = 0, g_press.upAt = -1, g_press.idleSince = -1;
+    EndDragsBy(dev);
+}
+
 void ShowCatcher(bool on) {
    if (on == g_catcherShown || g_catcher == vr::k_ulOverlayHandleInvalid) return;
    g_catcherShown = on;
@@ -1500,6 +1532,137 @@ Screen *Find(int one_based) {
    return it == g_screens.end() ? nullptr : &it->second;
 }

+// ---------------------------------------------------------------- the lazy susan
+// "spin next|prev|<degrees>": the panels in the room (screens and floating windows, not
+// pinned ones) turn together about a vertical axis through your head, so the next panel to
+// your right (next) or left (prev) glides to straight ahead, or the ring turns by that many
+// degrees (positive turns it left, like next). Their arrangement stays as it is: the room
+// turns instead of you. A spin that arrives during one adds to it, from where the panels are
+// headed, so quick taps carry on smoothly. Grabbing a panel, or a command that places it,
+// takes it out of the spin where it is. The 3D mouse's pointer goes to straight ahead.
+constexpr double kSpinSeconds = 0.3;  // how long a spin takes
+constexpr double kSpinAhead = 8;      // degrees: a panel this near straight ahead is the current one
+constexpr double kSpinFocus = 30;     // degrees: when a spin settles, the panel this near ahead gets typing
+
+struct Spin {
+    bool on = false;
+    double cx = 0, cz = 0;    // the axis
+    double from = 0, to = 0;  // radians, turned from the poses in base (positive: to the left)
+    Clock::time_point start;
+    std::map<int, Mat> base;  // index -> its pose before the spin
+    int front = -1;           // settled: this panel came to the front (ft_vr_poll reports it)
+} g_spin;
+
+// p turned a radians about the vertical axis through (cx, cz); positive turns it to the left.
+Mat Turned(const Mat &p, double a, double cx, double cz) {
+    const double c = std::cos(a), s = std::sin(a);
+    Mat r = Identity();
+    r.m[0][0] = float(c), r.m[0][2] = float(s);
+    r.m[2][0] = float(-s), r.m[2][2] = float(c);
+    r.m[0][3] = float(cx - c * cx - s * cz);
+    r.m[2][3] = float(cz + s * cx - c * cz);
+    return Mul(r, p);
+}
+
+bool Spinnable(const Screen &s) { return s.pinned == kNone && (!s.floating || s.floatOn) && s.drag == Drag::None; }
+
+double SpinNow() {
+    if (!g_spin.on) return g_spin.to;
+    const double t = std::min(1.0, std::chrono::duration<double>(Clock::now() - g_spin.start).count() / kSpinSeconds);
+    return g_spin.from + (g_spin.to - g_spin.from) * t * t * (3 - 2 * t);
+}
+
+void UpdateSpin() {
+    if (!g_spin.on) return;
+    const double a = SpinNow();
+    const bool done = Clock::now() - g_spin.start >= std::chrono::duration<double>(kSpinSeconds);
+    for (auto it = g_spin.base.begin(); it != g_spin.base.end();) {
+        auto s = g_screens.find(it->first);
+        if (s == g_screens.end() || !Spinnable(s->second)) {
+            it = g_spin.base.erase(it);  // grabbed, pinned, or gone: it stays where it is now
+            continue;
+        }
+        SetAbsolute(s->second, Turned(it->second, a, g_spin.cx, g_spin.cz));
+        ++it;
+    }
+    if (done) {
+        // The panel now nearest straight ahead (of where you face) gets typing and the active window.
+        Mat head;
+        double nearest = kSpinFocus;
+        if (DevicePose(vr::k_unTrackedDeviceIndex_Hmd, &head)) {
+            for (const auto &[i, p] : g_spin.base) {
+                const auto it = g_screens.find(i);
+                Mat q;
+                if (it == g_screens.end() || !it->second.visible || !ScreenPose(it->second, &q)) continue;
+                double f[3] = {-head.m[0][2], 0, -head.m[2][2]};
+                double d[3] = {q.m[0][3] - head.m[0][3], 0, q.m[2][3] - head.m[2][3]};
+                const double fl = std::sqrt(Dot3(f, f)), dl = std::sqrt(Dot3(d, d));
+                if (fl < 1e-6 || dl < 1e-6) continue;
+                const double a = std::acos(std::clamp(Dot3(f, d) / (fl * dl), -1.0, 1.0)) * 180 / M_PI;
+                if (a < nearest) nearest = a, g_spin.front = i;
+            }
+        }
+        g_spin.on = false;
+        g_spin.base.clear();
+        ArrangeDesktopSoon();  // KWin's outputs follow where the screens are now
+    }
+}
+
+void SpinCommand(const char *arg, char *reply, int size) {
+    Mat head;
+    if (!DevicePose(vr::k_unTrackedDeviceIndex_Hmd, &head))
+        return (void)std::snprintf(reply, size, "error no head pose (headset off?)");
+    if (g_spin.on) {
+        g_spin.from = SpinNow();  // carry on from where the panels are now
+    } else {
+        g_spin.base.clear();
+        for (auto &[i, s] : g_screens) {
+            Mat p;
+            if (Spinnable(s) && ScreenPose(s, &p)) g_spin.base[i] = p;
+        }
+        g_spin.cx = head.m[0][3], g_spin.cz = head.m[2][3];
+        g_spin.from = g_spin.to = 0;
+    }
+    if (g_spin.base.empty()) return (void)std::snprintf(reply, size, "error nothing to spin");
+    double turn;  // degrees, positive to the left
+    const bool next = !std::strcmp(arg, "next");
+    if (next || !std::strcmp(arg, "prev")) {
+        // Each visible panel's bearing from where you face, to the right positive, as it will
+        // be when the spin so far ends; the nearest one past straight ahead comes to the front.
+        double fx = -head.m[0][2], fz = -head.m[2][2];
+        const double n = std::sqrt(fx * fx + fz * fz) + 1e-9;
+        fx /= n, fz /= n;
+        const double rx = -fz, rz = fx;
+        double best = 0;
+        bool found = false;
+        for (const auto &[i, p] : g_spin.base) {
+            const auto s = g_screens.find(i);
+            if (s == g_screens.end() || !s->second.visible) continue;
+            const Mat q = Turned(p, g_spin.to, g_spin.cx, g_spin.cz);
+            const double dx = q.m[0][3] - head.m[0][3], dz = q.m[2][3] - head.m[2][3];
+            double a = std::atan2(dx * rx + dz * rz, dx * fx + dz * fz) * 180 / M_PI;
+            if (!next) a = -a;
+            if (a <= kSpinAhead) a += 360;
+            if (!found || a < best) best = a, found = true;
+        }
+        if (!found || best >= 360 - kSpinAhead) {
+            if (!g_spin.on) g_spin.base.clear();
+            return (void)std::snprintf(reply, size, "ok 0 (no other panel)");
+        }
+        if (best > 180) best -= 360;  // the short way round
+        turn = next ? best : -best;
+    } else {
+        char *end;
+        turn = std::strtod(arg, &end);
+        if (end == arg || *end) return (void)std::snprintf(reply, size, "error spin next|prev|<degrees>");
+    }
+    g_spin.to += turn * M_PI / 180;
+    g_spin.start = Clock::now();
+    g_spin.on = true;
+    SendPointer("recenter");  // the 3D mouse's pointer stays in front of you, on what comes there
+    std::snprintf(reply, size, "ok %.1f", turn);
+}
+
 uint32_t LinuxButton(uint32_t vrButton) {
    switch (vrButton) {
        case vr::VRMouseButton_Right: return BTN_RIGHT;
@@ -1514,6 +1677,81 @@ void ReleaseAwayBy(vr::TrackedDeviceIndex_t dev, uint32_t vrButton, void (*handl
    if (g_press.buttons && dev == g_press.device) ReleaseAway(LinuxButton(vrButton), handle, data);
 }

+// Where a laser meets a panel's surface, in the panel's u (metres along it from the centre,
+// along the arc when curved) and v (up). OpenVR curves a screen into a cylinder toward its
+// front, centred `curve` metres in front of it (see OnSurface).
+bool RayOnSurface(const Screen &s, const Mat &p, const Mat &laser, double *u, double *v) {
+    const Mat inv = Inverse(p);
+    const double o[3] = {inv.m[0][0] * laser.m[0][3] + inv.m[0][1] * laser.m[1][3] + inv.m[0][2] * laser.m[2][3] + inv.m[0][3],
+                         inv.m[1][0] * laser.m[0][3] + inv.m[1][1] * laser.m[1][3] + inv.m[1][2] * laser.m[2][3] + inv.m[1][3],
+                         inv.m[2][0] * laser.m[0][3] + inv.m[2][1] * laser.m[1][3] + inv.m[2][2] * laser.m[2][3] + inv.m[2][3]};
+    double d[3];
+    for (int i = 0; i < 3; ++i) d[i] = -(inv.m[i][0] * laser.m[0][2] + inv.m[i][1] * laser.m[1][2] + inv.m[i][2] * laser.m[2][2]);
+    if (s.curve <= 0) {
+        if (std::fabs(d[2]) < 1e-6) return false;
+        const double t = -o[2] / d[2];
+        if (t <= 0) return false;
+        *u = o[0] + d[0] * t, *v = o[1] + d[1] * t;
+        return true;
+    }
+    // x^2 + (z - r)^2 = r^2, on the screen's side of the axis (z < r).
+    const double r = s.curve, oz = o[2] - r;
+    const double a = d[0] * d[0] + d[2] * d[2], b = 2 * (o[0] * d[0] + oz * d[2]), c = o[0] * o[0] + oz * oz - r * r;
+    const double disc = b * b - 4 * a * c;
+    if (a < 1e-9 || disc < 0) return false;
+    for (double t : {(-b - std::sqrt(disc)) / (2 * a), (-b + std::sqrt(disc)) / (2 * a)}) {
+        const double x = o[0] + d[0] * t, z = oz + d[2] * t;
+        if (t <= 0 || z >= 0) continue;
+        *u = r * std::atan2(x, -z), *v = o[1] + d[1] * t;
+        return true;
+    }
+    return false;
+}
+
+// Where the mode leaves the controllers to a VR game (see the top): a hand controller
+// pointing at a panel, its controls, or a floating window's popups keeps that panel's laser
+// on (UpdateLasers) until kAimLinger ticks after it points away, like SteamVR's own floating
+// windows. Leaving takes a wider margin than arriving, and a drag or a held button keeps it
+// on. The keyboard is one overlay, so SteamVR's own intersection test does there.
+void UpdateAim() {
+    if (LasersByMode()) return;
+    std::vector<Mat> lasers;
+    for (vr::TrackedDeviceIndex_t i = 1; i < vr::k_unMaxTrackedDeviceCount; ++i) {
+        Mat d;
+        if (IsHandController(i) && LaserPose(i, &d)) lasers.push_back(d);
+    }
+    for (auto &[index, s] : g_screens) {
+        Mat p;
+        if (!s.visible || !ScreenPose(s, &p)) continue;
+        if (s.drag != Drag::None || (g_press.buttons && g_press.screen == index)) {
+            s.aimUntil = g_tick + kAimLinger;
+            continue;
+        }
+        const double m = s.grip * (g_tick < s.aimUntil ? 2.0 : 0.25), h = s.heightMetres();
+        // The panel and its controls: the bar row under it, the resize tab off its corner.
+        const double halfW = std::max(s.metres / 2 + s.grip, s.chrome / 2 + s.chrome * 0.12 + s.grip * 2) + m;
+        const double top = h / 2 + m, bottom = std::min(BarY(s) - s.grip, -(h / 2 + s.grip)) - m;
+        for (const Mat &l : lasers) {
+            double u, v;
+            if (!RayOnSurface(s, p, l, &u, &v)) continue;
+            bool on = std::fabs(u) <= halfW && v <= top && v >= bottom;
+            for (const auto &[k, sub] : s.subs) {
+                if (on || s.cropW <= 0) break;
+                const double su = (sub.x + sub.w / 2.0 - (s.cropX + s.cropW / 2.0)) * s.mpp;
+                const double sv = -(sub.y + sub.h / 2.0 - (s.cropY + s.cropH / 2.0)) * s.mpp;
+                on = std::fabs(u - su) <= sub.w * s.mpp / 2 + m && std::fabs(v - sv) <= sub.h * s.mpp / 2 + m;
+            }
+            if (on) {
+                s.aimUntil = g_tick + kAimLinger;
+                break;
+            }
+        }
+    }
+    if (keyboard::Shown())
+        for (const Mat &l : lasers)
+            if (keyboard::Aimed(l)) g_keyboardAimUntil = g_tick + kAimLinger;
+}
+
 const char *LasersName() {
    switch (g_lasers) {
        case Lasers::Always: return "always";
@@ -2036,6 +2274,7 @@ void ft_vr_poll(void (*handle)(const struct ft_event *, void *), void *data) {
        if (ev.eventType == vr::VREvent_MouseButtonUp)
            ReleaseAwayBy(ev.trackedDeviceIndex, ev.data.mouse.button, handle, data);
    if (g_press.upAt >= 0 && g_tick >= g_press.upAt) ReleaseAway(BTN_LEFT, handle, data);
+    ReleaseStuck(handle, data);
    RefreshChrome();
    while (vr::VRSystem()->PollNextEvent(&ev, sizeof ev)) {
        if (ev.eventType == vr::VREvent_Quit) {
@@ -2071,10 +2310,19 @@ void ft_vr_poll(void (*handle)(const struct ft_event *, void *), void *data) {
        handle(&e, data);
    }
    ++g_tick;
+    UpdateSpin();
+    if (g_spin.front >= 0) {
+        ft_event e{};
+        e.type = FT_FRONT;
+        e.screen = g_spin.front;
+        g_spin.front = -1;
+        handle(&e, data);
+    }
    UpdateGame();
    UpdateArrange();
    UpdateVisibility();
    UpdateAttention();
+    UpdateAim();
    UpdateLasers();
    UpdateControls();
    UpdateGuides();
@@ -2101,7 +2349,7 @@ bool ft_vr_keyboard_show(int index) {
    const double fx = -head.m[0][2], fz = -head.m[2][2], n = std::sqrt(fx * fx + fz * fz) + 1e-9;
    const double at[3] = {head.m[0][3] + fx / n * kKeyboardAhead, head.m[1][3] - kKeyboardBelow,
                          head.m[2][3] + fz / n * kKeyboardAhead};
-    keyboard::SetLasers(g_lasers == Lasers::Always || (g_lasers == Lasers::OutsideGames && !g_gameRunning));
+    keyboard::SetLasers(LasersByMode());
    g_steamInFront = SteamInFront();
    if (g_steamInFront) {
        g_asidePose = FacingPose(at, head);
@@ -2146,6 +2394,8 @@ void ft_vr_keyboard_hide(void) {
 //                             ~100 ms (it landed on something else), KWin gets it anyway
 //   state         -> "ok <mode> <manual 0|1> <wrist deg> <gesture hand> <gesture deg>
 //                     <controllers> <game running 0|1> <ingames>"
+//   spin next|prev|<degrees>  turn every panel in the room about your head (see the lazy
+//                             susan) -> "ok <degrees turned>"
 //   cutouts on|off|state      hand cutouts (see handcut.h) -> "ok <on|off> <ready|idle|unavailable>
 //                             <last composite ms> ms, predict <on|off> lead <ms> ms"
 //   cutouts predict on|off    move the hands ahead along their velocity (on by default)
@@ -2183,6 +2433,7 @@ void ft_vr_command(const char *cmd, char *reply, int size) {
        Screen *s = Find(n);
        if (!s) return (void)std::snprintf(reply, size, "error no screen %d", n);
        EndDrag(*s);
+        g_spin.base.erase(n - 1);
        SetAbsolute(*s, PanelPose(x, y, z, yaw, pitch, roll));
        std::snprintf(reply, size, "ok");
    } else if (std::sscanf(cmd, "width %d %lf", &n, &w) == 2) {
@@ -2349,6 +2600,7 @@ void ft_vr_command(const char *cmd, char *reply, int size) {
        Mat m{};
        for (int k = 0; k < 12; ++k) m.m[k / 4][k % 4] = r[k];
        EndDrag(*s);
+        g_spin.base.erase(n - 1);
        SetAbsolute(*s, m);
        std::snprintf(reply, size, "ok");
    } else if (int k0; std::sscanf(cmd, "sub %d %d %d %d %d %d", &n, &k0, &x0, &y0, &w0, &h0) == 6 ||
@@ -2376,6 +2628,8 @@ void ft_vr_command(const char *cmd, char *reply, int size) {
        if ((g_press.buttons & ButtonBit(BTN_LEFT)) && g_press.device != kNone && !IsHandController(g_press.device))
            g_press.upAt = g_tick + 9;
        std::snprintf(reply, size, "ok");
+    } else if (std::sscanf(cmd, "spin %15s", word) == 1) {
+        SpinCommand(word, reply, size);
    } else if (std::strncmp(cmd, "state", 5) == 0) {
        std::snprintf(reply, size, "ok %s %d %.0f %s %.0f %s %d %s", ModeName(), g_manual ? 1 : 0, g_wristAngle,
                      g_gestureHand.c_str(), g_gestureAngle, LasersName(), g_gameRunning ? 1 : 0,
@@ -17,7 +17,8 @@ struct ft_dmabuf {
    int fd[4];
 };

-enum ft_event_type { FT_MOTION, FT_BUTTON, FT_SCROLL, FT_LEAVE, FT_QUIT, FT_KEY, FT_KEYBOARD_CLOSED };
+// FT_FRONT: a spin (the lazy susan) brought panel `screen` to straight ahead: typing goes there.
+enum ft_event_type { FT_MOTION, FT_BUTTON, FT_SCROLL, FT_LEAVE, FT_QUIT, FT_KEY, FT_KEYBOARD_CLOSED, FT_FRONT };

 struct ft_event {
    enum ft_event_type type;
@@ -0,0 +1,25 @@
+#!/usr/bin/env bash
+# Update the lines of ~/.config/frametop.conf that still read exactly as an older
+# frametop.conf.example wrote them. A line you changed stays as it is. install.sh and
+# hands/rec/install.sh run this on every install and update.
+#   HANDS_SWAP_SIDES=0: the example's value until 2026-10-05. It made ft-hands keep ft-camd's side
+#   camera names even when they're backwards (some SteamVR restarts swap them), so hands landed
+#   beside their cutouts and the hand recorder labelled the side cameras wrong. auto tells from
+#   the hands.
+set -euo pipefail
+root=$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)
+. "$root/scripts/_env.sh"
+
+on_frame_script <<'EOF'
+f=~/.config/frametop.conf
+[ -f "$f" ] || exit 0
+old="HANDS_SWAP_SIDES=0         # hand tracking (hands/run.sh install): 1 = the side cameras' names are swapped, which some SteamVR restarts cause (hands/tools/check_sides.py --ring tells)"
+new="HANDS_SWAP_SIDES=auto      # hand tracking: which side camera is which. auto = ft-hands tells from the hands and fixes ft-camd's names, which some SteamVR restarts swap | 0 = keep ft-camd's | 1 = exchange them"
+if grep -qxF "$old" "$f"; then
+  tmp=$(mktemp)
+  awk -v old="$old" -v new="$new" '$0 == old { print new; next } { print }' "$f" > "$tmp"
+  cat "$tmp" > "$f"   # in place: the file keeps its owner and mode
+  rm -f "$tmp"
+  echo "settings: HANDS_SWAP_SIDES=0 (the old default) is now auto: hand tracking tells the side cameras apart itself"
+fi
+EOF
@@ -36,6 +36,10 @@ check "distrobox" on_frame 'test -x ~/.local/bin/distrobox && ~/.local/bin/distr
 check "container $FRAME_BOX" on_frame "podman ps -a --filter name=^$FRAME_BOX\$ --format '{{.Image}} {{.Status}}' | grep ."
 check "repo on the Frame" on_frame 'pwd'
 check "free space in ~" on_frame "df -h ~ | awk 'NR==2{print \$4\" free\"}'"
+# A taskbar saved on a screen the desktop doesn't have is hidden; the desktop's next start
+# moves it to the first screen (session/fix-panels.py).
+check "taskbar on a screen" on_frame 'set -o pipefail; [ -f session/fix-panels.py ] || { echo "not checked (older checkout)"; exit 0; }
+  python3 session/fix-panels.py --check | paste -sd ";" | sed "s/;/; /g"'

 echo "what Frametop needs from SteamOS:"
 if [ "$FRAME_LOCAL" = 1 ]; then
@@ -26,7 +26,8 @@ for u in frametop-input-relay frametop-pointer frametop-power; do
 done
 echo "desktop: $(pgrep -x ft-screens >/dev/null && echo running || echo 'not running'), plasmashell: $(pgrep -c plasmashell || true)"
 echo "paused for VR games: $(cat /run/user/$(id -u)/frametop-pause.json 2>/dev/null || echo 'no (never paused since boot)')"
-LD_LIBRARY_PATH=/opt/steamvr/bin/linuxarm64 /opt/steamvr/bin/linuxarm64/vrpathreg show 2>/dev/null | sed -n '/xternal/,$p'
+# SteamVR's config folder: a terminal in the desktop has the session's own (docs/design.md).
+XDG_CONFIG_HOME=$HOME/.config LD_LIBRARY_PATH=/opt/steamvr/bin/linuxarm64 /opt/steamvr/bin/linuxarm64/vrpathreg show 2>/dev/null | sed -n '/xternal/,$p'

 section "What Frametop needs from SteamOS (scripts/update-check.py)"
 python3 "$repo/scripts/update-check.py" 2>&1 || true
@@ -42,12 +43,53 @@ for i, s in enumerate(d.get("screens", []), 1):
 print("visibility:", d.get("visibility"))
 PY

+section "Plasma panels and outputs"
+python3 "$repo/session/fix-panels.py" --check 2>&1 || true
+python3 - "$repo" <<'PY' 2>&1 || true
+import json, subprocess, sys
+sys.path.insert(0, sys.argv[1] + "/layout")
+import ft_layout
+env = ft_layout.nested_env()
+if not env:
+    sys.exit(print("desktop not running: no live outputs or panels"))
+outs = json.loads(subprocess.run(["kscreen-doctor", "-j"], capture_output=True, text=True, env=env, timeout=10).stdout or "{}")
+for o in outs.get("outputs", []):
+    size = o.get("size") or {}
+    print(f"output {o.get('name')}: enabled={o.get('enabled')} priority={o.get('priority')} {size.get('width')}x{size.get('height')}")
+js = "print(JSON.stringify(panels().map(p => ({id: p.id, screen: p.screen, location: p.location}))))"
+r = subprocess.run(["qdbus6", "org.kde.plasmashell", "/PlasmaShell", "org.kde.PlasmaShell.evaluateScript", js],
+                   capture_output=True, text=True, env=env, timeout=10)
+print("live panels:", (r.stdout or r.stderr).strip())
+PY
+
 section "Input relay (last 60 lines)"
 journalctl --user -u frametop-input-relay -n 60 --no-pager -o short 2>/dev/null
 section "Pointer helper (last 60 lines)"
 journalctl --user -u frametop-pointer -n 60 --no-pager -o short 2>/dev/null
 section "Power service (last 30 lines)"
 journalctl --user -u frametop-power -n 30 --no-pager -o short 2>/dev/null
+section "Gaze"
+echo "frametop-gaze: $(systemctl --user is-enabled frametop-gaze 2>/dev/null) / $(systemctl --user is-active frametop-gaze 2>/dev/null)"
+echo "frametop-eyegrab (our eye tracker's frame grabber): $(systemctl is-enabled frametop-eyegrab 2>/dev/null) / $(systemctl is-active frametop-eyegrab 2>/dev/null)"
+for f in calibration.json eyes/calibration.json; do  # SteamVR's correction, our tracker's calibration
+  p=~/.local/state/frametop/gaze/$f
+  echo "$f: $([ -f "$p" ] && date -r "$p" '+%F %T' || echo none)"
+done
+python3 - "$repo" <<'PY' 2>&1 || true
+import json, subprocess, sys
+out = subprocess.run([sys.executable, sys.argv[1] + "/gaze/ft-gazectl", "status"], capture_output=True, text=True, timeout=10)
+text = (out.stdout or out.stderr).strip()
+try:
+    print("status:", json.dumps(json.loads(text), separators=(",", ":")))
+except ValueError:
+    print("status:", text or "no answer from the gaze service")
+PY
+section "Gaze checks and calibration dots (last 10)"
+tail -n 10 ~/.local/state/frametop/gaze/checks.jsonl 2>/dev/null | cut -c1-400 || true
+section "Gaze service (last 60 lines, podman's left out)"
+journalctl --user -u frametop-gaze -n 300 --no-pager -o short 2>/dev/null | grep -v ' podman\[' | tail -n 60
+section "Our eye tracker's frame grabber (last 20 lines)"
+journalctl -u frametop-eyegrab -n 20 --no-pager -o short 2>/dev/null
 for f in /tmp/frametop-session.log /tmp/frametop-screens.log /tmp/frametop-layout.log; do
  section "$f (last 60 lines)"
  tail -n 60 "$f" 2>/dev/null || echo "missing"
@@ -35,6 +35,9 @@ KNOWN_GOOD = os.path.join(HOME, ".local/state/frametop/known-good.json")
 STEAMVR_BIN = "/opt/steamvr/bin/linuxarm64"
 LAUNCHER = os.path.join(HOME, ".local/share/applications/deckard-nested-desktop.desktop")
 VRPATHS = os.path.join(HOME, ".config/openvr/openvrpaths.vrpath")
+# The Frametop desktop has its own XDG_CONFIG_HOME (session/frametop-session.sh). An install from a
+# terminal there, before pointer/driver/install.sh set SteamVR's, left vrpathreg's registry here.
+STRAY_VRPATHS = os.path.join(HOME, ".config/frametop/openvr/openvrpaths.vrpath")
 BACKLIGHT = "/sys/class/backlight/ae94000.dsi.0/brightness"  # as in power/ft-powerd.cpp
 EYE_MMAP = "/dev/shm/eye-server.mmap"
 VRSERVER = "http://127.0.0.1:27062"  # its web socket: input/vrws.py
@@ -49,6 +52,8 @@ PACKAGES = {
            "after a desktop restart; floating a window; no blur behind the taskbar's menus",
    "plasma-workspace": "the taskbar and panels after a desktop restart; no DiscoverNotifier or "
                        "ibus-daemon inside the desktop",
+    "at-spi2-core": "an AT-SPI-aware app appears on the nested desktop's accessibility bus; "
+                    "the registry stops and comes back after a desktop restart",
    "gamescope": "the headset's volume buttons with nothing focused; typing goes where you last clicked",
    "bluez": "a Bluetooth mouse reconnecting after it sleeps",
 }
@@ -162,6 +167,14 @@ def check_host():
        ("/usr/bin/kwin_wayland_wrapper", "FAIL", "the desktop can't start KWin"),
        ("/usr/bin/startplasma-wayland", "FAIL", "the desktop can't start Plasma"),
        ("/usr/bin/dbus-run-session", "FAIL", "the desktop can't start its session bus"),
+        ("/usr/bin/python3", "warn", "nested accessibility can't run its startup helper"),
+        ("/usr/bin/gdbus", "warn", "nested accessibility can't discover or check its bus"),
+        ("/usr/lib/at-spi-bus-launcher", "warn", "nested accessibility can't start its bus"),
+        ("/usr/lib/at-spi2-registryd", "warn", "nested accessibility has no fallback registry"),
+        ("/usr/share/dbus-1/services/org.a11y.Bus.service", "warn",
+         "nested accessibility can't activate its bus"),
+        ("/usr/share/dbus-1/accessibility-services/org.a11y.atspi.Registry.service", "warn",
+         "nested accessibility can't activate its registry natively"),
        (f"{STEAMVR_BIN}/vrcmd", "FAIL", "the 3D mouse can't find panels"),
        (f"{STEAMVR_BIN}/vrpathreg", "warn", "the pointer driver can't be installed or removed"),
        ("/usr/share/deckard/mesavars.sh", "warn", "the desktop starts without SteamOS's Mesa settings"),
@@ -217,6 +230,14 @@ def check_host():
    else:
        report("FAIL", "pointer driver", "not registered with SteamVR; run pointer/driver/install.sh install, "
               "then restart SteamVR")
+    try:
+        with open(STRAY_VRPATHS) as f:
+            stray = json.load(f).get("runtime") is None
+    except (OSError, ValueError, AttributeError):
+        stray = False
+    if stray:
+        report("warn", "OpenVR path registry", f"{STRAY_VRPATHS} has no SteamVR in it, and hides SteamVR from "
+               "OpenVR programs started in the Frametop desktop; pointer/driver/install.sh install removes it")

    session = launcher_session()
    if session is None:
@@ -464,6 +485,8 @@ def main():
    # A terminal in the desktop has its session's runtime dir and bus; systemctl needs the real ones.
    os.environ["XDG_RUNTIME_DIR"] = f"/run/user/{UID}"
    os.environ["DBUS_SESSION_BUS_ADDRESS"] = f"unix:path=/run/user/{UID}/bus"
+    # And its own config folder, where SteamVR's path registry isn't: OpenVR and vrcmd need ours.
+    os.environ["XDG_CONFIG_HOME"] = os.path.join(HOME, ".config")

    versions = current_versions()
    check_versions(versions)
@@ -0,0 +1,143 @@
+#!/usr/bin/env python3
+"""Bring back a taskbar that Plasma saved against a screen this desktop doesn't have.
+
+Plasma 6.2.5 ties each panel to a screen number (lastScreen in its containment), and the
+numbers rank the enabled outputs by priority: 0 is the primary screen. A panel whose
+number is past the screen count gets no view and stays hidden; Plasma never moves it,
+even on a later start (sanitizeScreenLayout() only remaps a panel whose number has no
+desktop, and the Frametop desktop keeps a desktop for every spare output it has seen).
+So a taskbar saved on a spare output (issue #18), or on a screen that a smaller layout
+dropped, was lost until the config was deleted.
+
+The session runs this before Plasma starts, so nothing races Plasma for the file. Each
+panel numbered at or past the screen count moves to screen 0, with its system tray's
+containment, and keeps its widgets and settings. A panel is left where it is when screen
+0 already has a panel on that edge: it comes back by itself if the screens do. The file
+is backed up once per repair (<file>.ft-bak), and the changes go through kwriteconfig6.
+
+  fix-panels.py [--screens N] [--file APPLETSRC] [--check]
+    --screens  the desktop's screen count (default: the configured layout's)
+    --file     default: $XDG_CONFIG_HOME/plasma-org.kde.plasma.desktop-appletsrc, with
+               XDG_CONFIG_HOME defaulting to the Frametop desktop's ~/.config/frametop
+    --check    change nothing; list the panels, and exit 1 if one is lost
+"""
+import argparse
+import os
+import re
+import shutil
+import subprocess
+import sys
+
+EDGES = {3: "top", 4: "bottom", 5: "left", 6: "right"}  # Plasma::Types::Location
+SYSTRAY = "org.kde.plasma.private.systemtray"
+GROUP = re.compile(r"\[([^\]]*)\]")
+
+
+def parse(text):
+    """KConfig text -> {(group, subgroup, ...): {key: value}}."""
+    groups, cur = {}, None
+    for line in text.splitlines():
+        line = line.strip()
+        if line.startswith("["):
+            cur = tuple(GROUP.findall(line))
+            groups.setdefault(cur, {})
+        elif cur is not None and "=" in line and not line.startswith("#"):
+            k, v = line.split("=", 1)
+            groups[cur][re.sub(r"\[\$.*\]$", "", k.strip())] = v.strip()
+    return groups
+
+
+def number(v, default=-1):
+    try:
+        return int(v)
+    except (TypeError, ValueError):
+        return default
+
+
+def panels(groups):
+    """The panels, by containment id: location, lastScreen, and the ids of their system
+    trays' own containments (which sit on the same edge and screen as the panel)."""
+    trays, found = {}, {}
+    for g, keys in groups.items():
+        if len(g) == 5 and g[0] == "Containments" and g[2] == "Applets" and g[4] == "Configuration":
+            tray = keys.get("SystrayContainmentId")
+            if tray:
+                trays.setdefault(g[1], []).append(tray)
+    owned = {t for ts in trays.values() for t in ts}
+    for g, keys in groups.items():
+        if len(g) != 2 or g[0] != "Containments" or number(g[1]) <= 0 or g[1] in owned:
+            continue
+        loc = number(keys.get("location"), 0)
+        if loc in EDGES and keys.get("plugin") != SYSTRAY:
+            found[g[1]] = {"location": loc, "screen": number(keys.get("lastScreen")),
+                           "plugin": keys.get("plugin", "?"), "trays": trays.get(g[1], [])}
+    return dict(sorted(found.items(), key=lambda kv: number(kv[0])))
+
+
+def plan(groups, screens):
+    """(moves, kept): moves are (panel id, from screen, containment ids to put on screen 0);
+    kept are (panel id, from screen, why) for lost panels left alone."""
+    found = panels(groups)
+    taken = {(p["screen"], p["location"]) for p in found.values() if 0 <= p["screen"] < screens}
+    moves, kept = [], []
+    for pid, p in found.items():
+        if p["screen"] < screens:
+            continue  # on a screen this desktop has (Plasma puts -1 on the first one itself)
+        if (0, p["location"]) in taken:
+            kept.append((pid, p["screen"], f"the first screen already has a {EDGES[p['location']]} panel"))
+            continue
+        taken.add((0, p["location"]))
+        moves.append((pid, p["screen"], [pid, *p["trays"]]))
+    return moves, kept
+
+
+def default_screens():
+    sys.path.insert(0, os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "layout"))
+    import ft_layout
+    return ft_layout.screen_count()
+
+
+def main(argv):
+    ap = argparse.ArgumentParser(description=__doc__.split("\n\n")[0])
+    ap.add_argument("--screens", type=int)
+    ap.add_argument("--file")
+    ap.add_argument("--check", action="store_true")
+    a = ap.parse_args(argv)
+    config = os.environ.get("XDG_CONFIG_HOME") or os.path.expanduser("~/.config/frametop")
+    path = a.file or os.path.join(config, "plasma-org.kde.plasma.desktop-appletsrc")
+    screens = a.screens if a.screens else default_screens()
+    try:
+        with open(path) as f:
+            groups = parse(f.read())
+    except FileNotFoundError:
+        if a.check:
+            print("no Plasma config yet (Plasma makes the default taskbar)")
+        return 0
+    moves, kept = plan(groups, screens)
+
+    if a.check:
+        found = panels(groups)
+        for pid, p in found.items():
+            lost = " (lost: no such screen)" if p["screen"] >= screens else ""
+            print(f"panel {pid}: screen {p['screen']}, {EDGES[p['location']]}{lost}")
+        if not found:
+            print("no panels")
+        print(f"{screens} screen(s)")
+        return 1 if moves or kept else 0
+
+    if moves:
+        shutil.copy2(path, path + ".ft-bak")
+    for pid, was, ids in moves:
+        for cid in ids:
+            subprocess.run(["kwriteconfig6", "--file", os.path.abspath(path), "--group", "Containments",
+                            "--group", cid, "--key", "lastScreen", "0"], check=True)
+        print(f"frametop: panel {pid} was saved on screen {was}, which this desktop doesn't have "
+              f"({screens} screen(s)); moved it to the first screen (backup: {path}.ft-bak)", file=sys.stderr)
+    for pid, was, why in kept:
+        print(f"frametop: panel {pid} is saved on screen {was}, which this desktop doesn't have; "
+              f"left there: {why}", file=sys.stderr)
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main(sys.argv[1:]))
@@ -29,7 +29,7 @@ for var in $(compgen -e); do
  case $var in
    LD_LIBRARY_PATH | LD_PRELOAD | STEAM_* | Steam* | SRT_* | PRESSURE_VESSEL_* | MANGOHUD_* | \
      ENABLE_VK_LAYER_VALVE_steam_overlay_* | STEAMVIDEOTOKEN | QT_IM_MODULE | GTK_IM_MODULE | \
-      XMODIFIERS) unset "$var" ;;
+      XMODIFIERS | AT_SPI_BUS_ADDRESS) unset "$var" ;;
  esac
 done

@@ -190,6 +190,21 @@ if [ "$remote" = 1 ]; then
  "$here/remote-ctl.sh" start
 fi

+# AT-SPI: start the registry inside Plasma's autostart, after KWin has published the
+# nested displays. Starting it before startplasma could bind to the host's X display.
+# This config belongs only to Frametop; the host desktop's autostart is unchanged.
+autostart=$XDG_CONFIG_HOME/autostart/frametop-atspi.desktop
+mkdir -p "$(dirname "$autostart")"
+cat > "$autostart" <<EOF
+[Desktop Entry]
+Type=Application
+Name=Frametop accessibility
+Exec="$here/ft-atspi"
+X-KDE-autostart-phase=2
+OnlyShowIn=KDE;
+NoDisplay=true
+EOF
+
 # ft-floatd (floating windows) runs inside the Plasma session, on its D-Bus: started from
 # the session's autostart, which only this desktop reads (XDG_CONFIG_HOME above).
 autostart=$XDG_CONFIG_HOME/autostart/frametop-floatd.desktop
@@ -272,4 +287,9 @@ fi
 # with both, apps would open twice.
 kwriteconfig6 --file "$XDG_CONFIG_HOME/ksmserverrc" --group General --key loginMode emptySession

+# Plasma keeps a panel on a screen number, and never moves one whose screen this desktop
+# doesn't have, like a spare output or a screen a smaller layout dropped. Put such a panel
+# back on the first (primary) screen before Plasma reads the file (session/fix-panels.py).
+python3 "$here/fix-panels.py" --screens "$screens" || true
+
 dbus-run-session startplasma-wayland
@@ -40,7 +40,7 @@ POINTER_HEAD_DEADZONE=0.5  # keyboard clicks at the gaze (Meta+J, Meta+K): degre
 POINTER_KEY_TAP=0.25       # keyboard clicks: let go within this (s) and it clicks where the dot was at the press, and tells the gaze tracker it was right
 GAZE_TRACKER=auto          # gaze service: auto = our own eye tracker when it's installed (gaze/tracker/install.sh, which install.sh offers), else SteamVR's | own = ours | steam = SteamVR's. Each keeps its own calibration (Calibrate on Frametop Input Settings' Gaze page)
 GAZE_EYE=auto              # gaze service: eye bias. auto = each eye weighted by how far off it was at your recent nudges | left | right = that eye counts twice
-HANDS_SWAP_SIDES=0         # hand tracking (hands/run.sh install): 1 = the side cameras' names are swapped, which some SteamVR restarts cause (hands/tools/check_sides.py --ring tells)
+HANDS_SWAP_SIDES=auto      # hand tracking: which side camera is which. auto = ft-hands tells from the hands and fixes ft-camd's names, which some SteamVR restarts swap | 0 = keep ft-camd's | 1 = exchange them
 HANDS_CPUS=5,6,7           # hand tracking: the CPUs its model threads run on
 HANDS_CAMERAS=auto         # hand tracking: auto (by the light) | mono (the IR cameras; also keeps ft-camd off the colour ones) | color | all
 HANDS_BRIGHT=all           # hand tracking, auto: the cameras in bright light, all | color
@@ -0,0 +1,87 @@
+#!/usr/bin/python3
+"""Start AT-SPI on this nested desktop's live bus, after KWin has set its displays."""
+import ast
+import os
+import signal
+import subprocess
+import sys
+import time
+
+DBUS = "org.freedesktop.DBus"
+DBUS_PATH = "/org/freedesktop/DBus"
+REGISTRY = "org.a11y.atspi.Registry"
+
+
+def call(address, destination, path, method, *args):
+    return subprocess.run(
+        ["gdbus", "call", "--address", address, "--dest", destination,
+         "--object-path", path, "--method", method, "--timeout", "5", *args],
+        check=True, capture_output=True, text=True, timeout=6).stdout.strip()
+
+
+def stop(child):
+    if child.poll() is None:
+        child.terminate()
+    try:
+        child.wait(timeout=3)
+    except subprocess.TimeoutExpired:
+        child.kill()
+        child.wait()
+
+
+def run_registry(address, session):
+    # SteamOS's registryd stays alive after a bus disconnect. Keep only our own
+    # child tied to both private buses; no host PID lookup or broad process kill.
+    registry = subprocess.Popen(["/usr/lib/at-spi2-registryd"])
+    try:
+        while registry.poll() is None:
+            try:
+                call(session, DBUS, DBUS_PATH, DBUS + ".GetId")
+                call(address, DBUS, DBUS_PATH, DBUS + ".GetId")
+            except subprocess.SubprocessError:
+                break  # Normal session shutdown or loss of its accessibility bus.
+            # Each check starts two gdbus processes, and SteamVR needs the CPU.
+            time.sleep(5)
+    finally:
+        stop(registry)
+
+
+def start():
+    session = os.environ.get("DBUS_SESSION_BUS_ADDRESS")
+    runtime = os.environ.get("XDG_RUNTIME_DIR", "")
+    if not session or os.path.basename(runtime) != "frametop":
+        return  # Do not autolaunch a bus or touch the host desktop.
+    os.environ.pop("AT_SPI_BUS_ADDRESS", None)
+    reply = call(session, "org.a11y.Bus", "/org/a11y/bus", "org.a11y.Bus.GetAddress")
+    address, = ast.literal_eval(reply)
+    if not isinstance(address, str) or not address.startswith("unix:"):
+        raise ValueError("org.a11y.Bus returned no local accessibility bus")
+    if call(address, DBUS, DBUS_PATH, DBUS + ".NameHasOwner", REGISTRY) == "(true,)":
+        return
+    # Activation otherwise inherits the accessibility daemon's old environment (and
+    # DBUS_SESSION_BUS_ADDRESS is the accessibility bus itself). Pin the live bus.
+    env = {key: os.environ.get(key, "") for key in (
+        "DISPLAY", "WAYLAND_DISPLAY", "XAUTHORITY", "XDG_RUNTIME_DIR",
+        "XDG_CONFIG_HOME", "DBUS_SESSION_BUS_ADDRESS")}
+    env["AT_SPI_BUS_ADDRESS"] = address
+    call(address, DBUS, DBUS_PATH, DBUS + ".UpdateActivationEnvironment", repr(env))
+    try:
+        call(address, DBUS, DBUS_PATH, DBUS + ".StartServiceByName", REGISTRY, "0")
+    except subprocess.CalledProcessError:
+        # SteamOS's launcher can select dbus-broker because we are in a user unit,
+        # but the private session bus has no systemd activation manager. Reuse its
+        # bus rather than starting another launcher/bus. Never replace an owner.
+        if call(address, DBUS, DBUS_PATH, DBUS + ".NameHasOwner", REGISTRY) == "(true,)":
+            return
+        os.environ["AT_SPI_BUS_ADDRESS"] = address
+        # registryd itself refuses to queue behind an existing registry, including
+        # races with native activation. The watcher cleans up only our own child.
+        run_registry(address, session)
+
+
+if __name__ == "__main__":
+    signal.signal(signal.SIGTERM, lambda signum, frame: sys.exit(0))
+    try:
+        start()
+    except (OSError, ValueError, SyntaxError, subprocess.SubprocessError) as error:
+        print(f"frametop: accessibility unavailable: {error}", file=sys.stderr)
@@ -10,7 +10,7 @@ cg=$(systemctl --user show -p ControlGroup --value "$unit" 2>/dev/null)

 # The desktop's own processes stay in the unit and stop with it: the session, KWin,
 # Plasma, and the session services it started (portals, input methods, kded, wallet...).
-own='^(frametop-sessi|dbus-|startplasma|plasma|kwin|Xwayland|ksmserver|krdpserver|Xvnc|xfreerdp|ft-layout|'
+own='^(frametop-sessi|dbus-|startplasma|plasma|kwin|Xwayland|ksmserver|krdpserver|Xvnc|xfreerdp|ft-layout|ft-atspi|'
 own+='kded|kactivitymanage|kaccess|kglobalaccel|kscreen|kwalletd|ksecretd|polkit-kde|org_kde_|baloo|'
 own+='xembedsniproxy|gmenudbusmenu|DiscoverNotifie|kimpanel|ibus|xdg-|at-spi|dconf-service|fusermount|agent)'
 keep=()
@@ -0,0 +1,162 @@
+#!/usr/bin/env python3
+"""Tests for session/fix-panels.py: issue #18's config (the taskbar saved on spare output 8
+of a 3-screen desktop), panels that are fine, an edge that's taken, and a real run of
+kwriteconfig6 on a copy. Nothing here touches the running desktop or its config.
+
+  python3 session/tests/test_fix_panels.py
+"""
+import importlib.util
+import os
+import subprocess
+import sys
+import tempfile
+import unittest
+
+HERE = os.path.dirname(os.path.realpath(__file__))
+SCRIPT = os.path.join(HERE, "..", "fix-panels.py")
+spec = importlib.util.spec_from_file_location("fix_panels", SCRIPT)
+fp = importlib.util.module_from_spec(spec)
+spec.loader.exec_module(fp)
+
+
+def desktop(cid, screen):
+    return f"""[Containments][{cid}]
+activityId=7e1d1a3c-0000-4000-8000-000000000000
+formfactor=0
+immutability=1
+lastScreen={screen}
+location=0
+plugin=org.kde.plasma.folder
+wallpaperplugin=org.kde.image
+"""
+
+
+def panel(cid, screen, location=4, tray=None):
+    text = f"""[Containments][{cid}]
+activityId=
+formfactor=2
+immutability=1
+lastScreen={screen}
+location={location}
+plugin=org.kde.panel
+wallpaperplugin=org.kde.image
+
+[Containments][{cid}][Applets][{cid}1]
+immutability=1
+plugin=org.kde.plasma.kickoff
+"""
+    if tray:
+        text += f"""
+[Containments][{cid}][Applets][{cid}2]
+immutability=1
+plugin=org.kde.plasma.systemtray
+
+[Containments][{cid}][Applets][{cid}2][Configuration]
+PreloadWeight=90
+SystrayContainmentId={tray}
+
+[Containments][{tray}]
+activityId=
+formfactor=2
+immutability=1
+lastScreen={screen}
+location={location}
+plugin=org.kde.plasma.private.systemtray
+popupHeight=432
+"""
+    return text
+
+
+ISSUE_18 = "\n".join([desktop(1, 0), desktop(18, 1), desktop(19, 2)] + [desktop(20 + i, 3 + i) for i in range(8)]
+                     + [panel(10, 8, tray=11), "[ScreenMapping]\nitemsOnDisabledScreens=\n"])
+
+
+class Plan(unittest.TestCase):
+    def test_issue_18(self):
+        moves, kept = fp.plan(fp.parse(ISSUE_18), 3)
+        self.assertEqual(moves, [("10", 8, ["10", "11"])])
+        self.assertEqual(kept, [])
+
+    def test_panel_on_a_screen_stays(self):
+        for screen in (0, 2, -1):
+            moves, kept = fp.plan(fp.parse(desktop(1, 0) + panel(2, screen, tray=8)), 3)
+            self.assertEqual((moves, kept), ([], []), screen)
+
+    def test_tray_is_not_a_panel(self):
+        found = fp.panels(fp.parse(panel(2, 0, tray=8)))
+        self.assertEqual(list(found), ["2"])
+        self.assertEqual(found["2"]["trays"], ["8"])
+
+    def test_desktops_never_move(self):
+        moves, _ = fp.plan(fp.parse(ISSUE_18), 1)
+        self.assertEqual([m[0] for m in moves], ["10"])
+
+    def test_edge_taken_on_first_screen(self):
+        text = panel(2, 0, tray=8) + panel(10, 8, tray=11)
+        moves, kept = fp.plan(fp.parse(text), 3)
+        self.assertEqual(moves, [])
+        self.assertEqual([k[:2] for k in kept], [("10", 8)])
+
+    def test_other_edge_is_free(self):
+        moves, kept = fp.plan(fp.parse(panel(2, 0) + panel(10, 4, location=3)), 3)
+        self.assertEqual(moves, [("10", 4, ["10"])])
+        self.assertEqual(kept, [])
+
+    def test_two_lost_on_one_edge(self):
+        moves, kept = fp.plan(fp.parse(panel(10, 5) + panel(12, 8)), 3)
+        self.assertEqual([m[0] for m in moves], ["10"])
+        self.assertEqual([k[0] for k in kept], ["12"])
+
+    def test_screen_count_went_down(self):
+        moves, _ = fp.plan(fp.parse(panel(2, 1, location=3)), 1)
+        self.assertEqual(moves, [("2", 1, ["2"])])
+
+
+class Run(unittest.TestCase):
+    def setUp(self):
+        self.dir = tempfile.TemporaryDirectory()
+        self.path = os.path.join(self.dir.name, "plasma-org.kde.plasma.desktop-appletsrc")
+        with open(self.path, "w") as f:
+            f.write(ISSUE_18)
+
+    def tearDown(self):
+        self.dir.cleanup()
+
+    def run_script(self, *args):
+        return subprocess.run([sys.executable, SCRIPT, "--file", self.path, "--screens", "3", *args],
+                              capture_output=True, text=True)
+
+    def test_check_reports_and_changes_nothing(self):
+        r = self.run_script("--check")
+        self.assertEqual(r.returncode, 1)
+        self.assertIn("panel 10: screen 8, bottom (lost", r.stdout)
+        with open(self.path) as f:
+            self.assertEqual(f.read(), ISSUE_18)
+
+    def test_repair(self):
+        r = self.run_script()
+        self.assertEqual(r.returncode, 0, r.stderr)
+        self.assertIn("moved it to the first screen", r.stderr)
+        with open(self.path) as f:
+            groups = fp.parse(f.read())
+        self.assertEqual(groups[("Containments", "10")]["lastScreen"], "0")
+        self.assertEqual(groups[("Containments", "11")]["lastScreen"], "0")
+        self.assertEqual(groups[("Containments", "10", "Applets", "101")]["plugin"], "org.kde.plasma.kickoff")
+        self.assertEqual(groups[("Containments", "25")]["lastScreen"], "8")  # a spare's desktop
+        with open(self.path + ".ft-bak") as f:
+            self.assertEqual(f.read(), ISSUE_18)
+        # A second run finds nothing to do and leaves the backup alone.
+        os.remove(self.path + ".ft-bak")
+        r = self.run_script()
+        self.assertEqual((r.returncode, r.stderr), (0, ""))
+        self.assertFalse(os.path.exists(self.path + ".ft-bak"))
+        self.assertEqual(self.run_script("--check").returncode, 0)
+
+    def test_no_config_yet(self):
+        os.remove(self.path)
+        self.assertEqual(self.run_script().returncode, 0)
+        self.assertEqual(self.run_script("--check").returncode, 0)
+
+
+if __name__ == "__main__":
+    unittest.main()
@@ -0,0 +1,241 @@
+#!/usr/bin/env bash
+# Uninstall Frametop from the Steam Frame. In a terminal on the headset (Konsole in the desktop,
+# or over SSH):
+#
+#   curl -fsSL https://deejanuz.github.io/frametop/uninstall.sh | bash
+#
+# or ~/frametop/uninstall.sh. It doesn't use the rest of the repo, so it also works when
+# ~/frametop is gone or broken.
+#
+# It never stops what you're using now: the input relay carries the keyboard and mouse, and the
+# desktop runs from the repo. So it goes in two steps:
+#   1. Frametop stops starting. The launcher's Desktop entry goes back to the stock desktop, and
+#      Frametop's services, SteamVR driver, menu entries, and system files (our eye tracker's
+#      frame grabber and the Bluetooth fixes, with sudo) are removed. What runs now keeps running
+#      until you restart the headset.
+#   2. After the restart, run it again. It deletes the code (~/frametop) and, if you want, your
+#      settings and the build container.
+# When nothing of Frametop is running, one run does both.
+#
+# Options (piped, they go after "bash -s --"):
+#   --dir DIR    where the repo is, if not ~/frametop
+#   --dry-run    show what it would do, and change nothing
+set -euo pipefail
+shopt -s nullglob
+
+usage() {
+  cat <<'EOF'
+usage: uninstall.sh [--dir DIR] [--dry-run]
+piped: curl -fsSL https://deejanuz.github.io/frametop/uninstall.sh | bash -s -- [options]
+EOF
+}
+
+dry=0
+apps=$HOME/.local/share/applications
+override=$apps/deckard-nested-desktop.desktop
+relay_unit=$HOME/.config/systemd/user/frametop-input-relay.service
+driver=$HOME/.local/share/frametop/ft_pointer
+vrpathreg=/opt/steamvr/bin/linuxarm64/vrpathreg
+handsctl=$HOME/.local/bin/ft-handsctl
+eyegrab_files=(/etc/systemd/system/frametop-eyegrab.service /etc/frametop/ft-eyegrab)
+bt_files=(/etc/systemd/system/steamframe-bt-fixups.service /etc/systemd/system/bluetooth.service.d/steamframe.conf
+          /etc/steamframe/bt-fixups.sh)
+
+step() { printf '\n\033[1m== %s\033[0m\n' "$*"; }
+run() {  # run a command, or with --dry-run, show it
+  if [ "$dry" = 1 ]; then printf '  would run: %s\n' "$*"; else "$@"; fi
+}
+ask() {  # ask "question" default(y|n)
+  local hint answer
+  if [ "$dry" = 1 ]; then echo "$1 [dry run: yes]"; return 0; fi
+  hint=$([ "$2" = y ] && echo "Y/n" || echo "y/N")
+  read -r -p "$1 [$hint] " answer </dev/tty || answer=
+  answer=${answer:-$2}
+  [[ $answer =~ ^[Yy] ]]
+}
+exists() { local f; for f in "$@"; do [ -e "$f" ] && return 0; done; return 1; }
+size() { du -shc "$@" 2>/dev/null | tail -1 | cut -f1; }
+
+# Is this folder Frametop's code? Only then is it deleted.
+is_repo() { [ "$1" != "$HOME" ] && [ -f "$1/desktops.sh" ] && [ -f "$1/session/frametop-session.sh" ]; }
+find_repo() {
+  local p
+  [ -n "$dir" ] && { echo "$dir"; return; }
+  # The launcher entry and the relay's unit point into the repo, until step 1 removes them.
+  p=$(sed -n 's#^Exec=\(.*\)/session/frametop-session\.sh.*#\1#p' "$override" 2>/dev/null | head -1)
+  [ -z "$p" ] && p=$(sed -n 's#^ExecStart=/usr/bin/python3 \(.*\)/input/input-relay\.py.*#\1#p' "$relay_unit" 2>/dev/null | head -1)
+  [ -z "$p" ] && [ -f "${BASH_SOURCE[0]:-}" ] && p=$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)
+  echo "${p:-$HOME/frametop}"
+}
+
+# Frametop's programs that are running now (step 1 leaves them running until the restart).
+running() {
+  local n out=()
+  for n in ft-screens ft-pointer ft-powerd ft-eyegrab ft-camd ft-hands; do
+    pgrep -x "$n" >/dev/null && out+=("$n")
+  done
+  pgrep -f '[i]nput/input-relay\.py' >/dev/null && out+=("input relay")
+  pgrep -f '[g]aze/ft-gazed' >/dev/null && out+=("gaze service")
+  pgrep -f '[f]rametop-session\.sh' >/dev/null && out+=("desktop session")
+  echo "${out[*]}"
+}
+
+main() {
+  local units=() entries=() names=() sys=0 repo now f
+  while [ $# -gt 0 ]; do
+    case $1 in
+      --dir) dir=${2:?--dir needs a folder}; shift ;;
+      --dry-run) dry=1 ;;
+      -h|--help) usage; return 0 ;;
+      *) echo "unknown option: $1" >&2; usage >&2; return 2 ;;
+    esac
+    shift
+  done
+
+  if ! { grep -qx 'ID=steamos' /etc/os-release && grep -qE '^VARIANT_ID="?vr"?$' /etc/os-release; } 2>/dev/null; then
+    echo "This uninstalls Frametop from a Steam Frame (SteamOS, VR variant). Run it in a terminal on the headset." >&2
+    return 1
+  fi
+  if [ "$dry" = 0 ] && ! { : </dev/tty; } 2>/dev/null; then
+    echo "This asks questions, and there's no terminal to ask in. Run it in one (over SSH: ssh -t)." >&2
+    return 1
+  fi
+  [ "$dry" = 1 ] && echo "Dry run: nothing changes."
+  repo=$(find_repo)
+
+  # Step 1: what makes Frametop start. Nothing here stops a running program.
+  [ -f "$override" ] && grep -q 'Frametop' "$override" || override=
+  units=("$HOME"/.config/systemd/user/frametop-*.service)
+  for f in ft-input-settings ft-display-settings ft-layout-reset ft-screens-toggle ft-remote-settings ft-gazeprobe; do
+    [ -e "$apps/$f.desktop" ] && entries+=("$apps/$f.desktop")
+  done
+  [ -e "$apps/frametop-handrec.desktop" ] && entries+=("$apps/frametop-handrec.desktop")
+  entries+=("$apps"/frametop-profile-*.desktop)  # one per layout profile (layout/ft_layout.py)
+  [ -L "$handsctl" ] || handsctl=
+  exists "${eyegrab_files[@]}" "${bt_files[@]}" && sys=1
+
+  if [ -n "$override" ] || [ ${#units[@]} -gt 0 ] || [ ${#entries[@]} -gt 0 ] || [ -d "$driver" ] ||
+     [ -n "$handsctl" ] || [ "$sys" = 1 ]; then
+    step "Step 1 of 2: stop Frametop from starting"
+    echo "This removes:"
+    [ -n "$override" ] && echo "  - the launcher's Desktop entry (Launch a program -> Desktop opens the stock desktop again)"
+    for f in "${units[@]}"; do echo "  - the service $(basename "$f")"; done
+    [ -d "$driver" ] && echo "  - the 3D mouse's SteamVR driver (ft_pointer)"
+    [ ${#entries[@]} -gt 0 ] && echo "  - ${#entries[@]} menu entries (Frametop Display Settings, Input Settings, ...)"
+    [ -n "$handsctl" ] && echo "  - $handsctl"
+    exists "${eyegrab_files[@]}" && echo "  - our eye tracker's frame grabber (a system service: needs your password)"
+    exists "${bt_files[@]}" && echo "  - the Bluetooth fixes (system files: needs your password)"
+    echo "What runs now keeps running until you restart the headset, so your keyboard, mouse, and"
+    echo "this terminal keep working. Your settings and the code stay for now."
+    ask "Uninstall Frametop?" n || { echo "Nothing changed."; return 0; }
+
+    [ -n "$override" ] && run rm -f "$override"
+    if [ ${#units[@]} -gt 0 ]; then
+      for f in "${units[@]}"; do names+=("$(basename "$f")"); done
+      run systemctl --user disable "${names[@]}" 2>/dev/null || true
+      run rm -f "${units[@]}"
+      run systemctl --user daemon-reload
+    fi
+    if [ -d "$driver" ]; then
+      if [ -x "$vrpathreg" ]; then
+        LD_LIBRARY_PATH=$(dirname "$vrpathreg") run "$vrpathreg" removedriver "$driver" ||
+          echo "warning: SteamVR's vrpathreg couldn't unregister the driver; SteamVR may log that it's missing" >&2
+      fi
+      run rm -rf "$driver"
+    fi
+    [ ${#entries[@]} -gt 0 ] && run rm -f "${entries[@]}"
+    [ -n "$handsctl" ] && run rm -f "$handsctl"
+    if [ "$sys" = 1 ]; then
+      echo "The system files need your password (sudo)."
+      if ! run sudo bash -c '
+        for u in frametop-eyegrab steamframe-bt-fixups; do systemctl disable $u.service 2>/dev/null; done
+        rm -f "$@"
+        rmdir /etc/frametop /etc/steamframe /etc/systemd/system/bluetooth.service.d 2>/dev/null
+        systemctl daemon-reload; true' sys "${eyegrab_files[@]}" "${bt_files[@]}"; then
+        echo "warning: the system files weren't removed (no password?). Run this again to retry." >&2
+      fi
+    fi
+    [ "$dry" = 1 ] || echo "Frametop no longer starts."
+  fi
+
+  # Step 2: delete what's left, once nothing of Frametop runs.
+  now=$(running)
+  if [ -n "$now" ]; then
+    step "Restart the headset to finish"
+    echo "Still running from before: $now."
+    echo "They stop when the headset restarts. After that, run this again to delete the code"
+    echo "($repo) and, if you want, your settings and the build container:"
+    echo
+    if [ "$repo" = "$HOME/frametop" ]; then
+      echo "  curl -fsSL https://deejanuz.github.io/frametop/uninstall.sh | bash"
+    else
+      echo "  curl -fsSL https://deejanuz.github.io/frametop/uninstall.sh | bash -s -- --dir $(printf %q "$repo")"
+    fi
+    echo
+    if ask "Restart the headset now? This closes everything open, in VR and on the desktop." n; then
+      run systemctl reboot || echo "Couldn't restart it from here: restart the headset from Steam's power menu." >&2
+    fi
+    [ "$dry" = 1 ] || return 0
+    echo "Dry run: after the restart, step 2 would go like this."
+  fi
+
+  step "Step 2 of 2: delete what's left"
+  if [ -d "$repo" ] && is_repo "$repo"; then
+    if [ -f "$repo/.git" ]; then
+      echo "Leaving $repo: it's a git worktree. Remove it with git worktree remove."
+    else
+      local def=y
+      if [ -n "$(git -C "$repo" status --porcelain --untracked-files=no 2>/dev/null)" ] ||
+         [ -n "$(git -C "$repo" log --branches --not --remotes --oneline 2>/dev/null | head -1)" ]; then
+        echo "$repo has changes of its own (git -C $repo status)."
+        def=n
+      fi
+      if ask "Delete the Frametop code in $repo ($(size "$repo"))?" "$def"; then
+        cd "$HOME"
+        run rm -rf "$repo"
+      fi
+    fi
+  elif [ -e "$repo" ]; then
+    echo "Leaving $repo: it doesn't look like Frametop's code."
+  fi
+
+  # Rebuilt by the desktop at each start, so nothing to keep.
+  run rm -rf "$HOME/.local/share/frametop/apps" "$HOME/.local/share/kwin/decorations/kwin4_decoration_qml_frametop" \
+    "$HOME/.cache/frametop"
+
+  local settings=("$HOME"/.config/frametop.conf* "$HOME"/.config/frametop-*.json* "$HOME/.config/frametop-remote"
+                  "$HOME/.config/frametop" "$HOME/.local/state/frametop")
+  local kept=()
+  for f in "${settings[@]}"; do [ -e "$f" ] && kept+=("$f"); done
+  if [ ${#kept[@]} -gt 0 ]; then
+    echo "Your settings: the screen layout and profiles, button maps, gaze calibration, the remote"
+    echo "desktop password, and the Frametop desktop's own Plasma setup (${kept[*]/#$HOME/\~})."
+    ask "Delete your settings too? Keep them to pick up where you left off if you reinstall." n &&
+      run rm -rf "${kept[@]}"
+  fi
+
+  local recs=()
+  for f in "$HOME/.local/share/frametop/eyes" "$HOME/.local/share/frametop/hands"; do [ -e "$f" ] && recs+=("$f"); done
+  if [ ${#recs[@]} -gt 0 ]; then
+    ask "Delete your eye and hand recordings in ~/.local/share/frametop ($(size "${recs[@]}"))?" n &&
+      run rm -rf "${recs[@]}"
+  fi
+  [ "$dry" = 1 ] || rmdir "$HOME/.local/share/frametop" 2>/dev/null || true
+
+  if command -v podman >/dev/null && podman container exists dev 2>/dev/null; then
+    echo "The build container (dev) holds Frametop's compilers and libraries, 1-2 GB. If you put"
+    echo "anything else in it, that goes too."
+    if ask "Delete the build container?" n; then
+      run "$HOME/.local/bin/distrobox" rm --force dev </dev/null
+      run podman image rm registry.fedoraproject.org/fedora-toolbox:44 >/dev/null 2>&1 || true
+      echo "distrobox stays in ~/.local/bin, for any other containers. To remove it too:"
+      echo "  ~/dev/src/distrobox/uninstall --prefix ~/.local"
+    fi
+  fi
+
+  step "Done"
+  echo "Frametop is uninstalled."
+}
+
+dir=
+main "$@"