frame-eyes, a separate project until now, becomes gaze/tracker:
- ft-eyegrab (was fe-bufprobe) copies the eye-camera frames, read-only, out of
SteamVR's eyetracking process. It runs as the system service
frametop-eyegrab.service, which gaze/tracker/install.sh installs to
/etc/frametop with sudo. It keeps only CAP_SYS_PTRACE, CAP_DAC_READ_SEARCH, and
CAP_CHOWN, and copies frames only while /dev/shm/frametop-eyes-want is fresh,
holding none of the tracker's buffers otherwise.
- ft-eyes (was fe-trackd) runs under ft-gazed in the dev container, with
build/venv's pinned numpy and OpenCV: while Eye tracker is Own tracker, or on
the probe's lease ("eyes SECONDS"). No sudo password or fe-live script at
run time any more.
- lab/ holds the research tools (ft-eyes-score, -e2e, -record, -replay,
-session) and findings.md. Recordings live outside the repo, in
~/.local/share/frametop/eyes/captures; .gitignore catches stray frame dumps.
Its socket is now @ft_eyes, its output /dev/shm/frametop-eyes-gaze, and its state
~/.local/state/frametop/gaze/eyes. On practice1 -> practice2 the whole live path
(ft-eyes-e2e) gives 1.30 deg median and 3.18 for the worst tenth, as before the
move (1.30, 3.21).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frametop Input Settings' Gaze page gets two settings, saved in frametop.conf and
read again by ft-gazed when the file changes: Eye tracker (GAZE_TRACKER: SteamVR's
or our own, frame-eyes' fe-trackd) and Eye bias (GAZE_EYE: auto, left, right).
ft-gazed now combines the eyes, each calibrated on its own: SteamVR's set 2 eyes
with the probe's Left eye and Right eye calibrations, or our tracker's eyes as
they come. Without per-eye calibrations, or with --source, it keeps the older
one-source path. A pointer nudge finds its look from the raw gaze the helper
echoes back; with our tracker it goes to fe-trackd as a click.
The bias leans instead of choosing (gazecal.EyeWeights): on 306 live clicks the
eyes' errors partly cancelled, both together 0.65 deg off against 0.96 and 1.11
for either alone. Left or Right counts that eye twice; auto weights each eye by
its RMS miss at its last 20 nudges, since the calibration's fit picked the wrong
eye on SteamVR's test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A head-locked performance overlay kept catching the 3D mouse. It has no
input method, so SteamVR's laser passes through it, but the helper hit
tests every visible overlay with ComputeOverlayIntersection, and the dot
stuck to it whenever it crossed that corner of the view.
POINTER_IGNORE in frametop.conf now lists overlay keys the helper leaves
out of the collision, comma-separated shell patterns, so "vendor.app*"
covers a whole app, including panels it opens later. The laser starts
just before the cursor point, so an ignored panel nearer to you doesn't
catch it either.
Frametop Input Settings has a new Ignored panels page. It asks the
helper for SteamVR's overlays ("overlays", answered from the list's
thread once vrcmd has run again, even while the pointer is off), groups
them by app, and has a checkbox per panel and one for the whole app.
Frametop's own screens aren't offered, since ignoring one would leave
nothing to click the app on with the mouse. Entries for apps that
aren't open are listed so they can be removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When SteamVR crashes, safe mode can block the newest add-on, and then it
skips the ft_pointer driver at every start. The cursor still moves (the
pointer helper draws it), but clicks, scrolling and mapped actions go
through the driver's virtual controller, so none of them do anything,
and nothing said why (#4).
Input Settings now shows a warning at the top of every page with the
fix: Manage Add-Ons in SteamVR's settings, unblock ft_pointer, restart
SteamVR. It reads steamvr.vrsettings (~/.config/openvr/config on the
Frame) for blocked_by_safe_mode, a disabled driver, or SteamVR's own
safe mode. When none of those is set but SteamVR is running (the helper
answers) and @ft_pointer doesn't, it says SteamVR runs without the
driver: unblocked but not restarted yet, or not installed. The driver
ignores the "ping" it sends. It checks at startup and every 30 minutes,
since the driver only changes when SteamVR restarts.
Fixes#4
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SteamVR's combined gaze keeps going on one eye, but it holds the lost
eye's yaw, so the gaze moves half as far sideways as the eyes do.
ft-gaze now reads each eye's tracking uncertainty and raw measurement
from eye-server.mmap. When the tracker loses an eye, ft-gazed takes the
gaze from the other one, plus the offset that eye usually shows
against both, learned while both are seen. On a recording, one eye
alone came out a median 0.8 degrees from both eyes' gaze.
Glances down at the keyboard, past every screen, aren't sent. The
pointer stays put, and eyes lost there don't count as lost.
The gaze probe gets a Headset fit mode. It shows per-eye tracking,
openness and confidence, maps where each eye gets lost, gives hints,
and has a guided check. The settings app opens it from the Gaze page
and shows how often each eye is lost. The probe can also test each eye
alone, and its side panel now collapses to a title bar so the dot
isn't hidden behind it.
Snapping to UI elements is deferred; the mouse drag is the correction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A controller released the 3D mouse's pointer on a single pose sample
faster than 0.35 m/s or 2 rad/s, once the mouse had been still for
500 ms. The helper polls about every 8 ms, so one noisy sample was
enough: a knock on the desk, or a tracking jump when the headset's
cameras pick a resting controller up again (#1).
A controller now has to stay over the limit for 100 ms in a row, and
only samples with a normal tracking result (Running_OK) count. The new
POINTER_CONTROLLER_PICKUP setting (1 by default, 0.5 to 5) scales both
limits; it's a slider on the Pointer page of Frametop Input Settings
and applies live. A controller picked up for real still gets the laser
back through SteamVR's hand role, which follows its touch sensors. The
release log now records the speed and spin that triggered it, to tune
the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SteamVR's "Enable global input from overlays (Experimental)" could only
be turned on from the settings app: its notice, with the button, hid once
the setting was on. It's now a switch, and the notice shows only when
buttons are mapped and the setting is off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Frame controllers aren't input devices on the host, so the pointer
helper reads them with SteamVR input (vrbuttons.h, actions/), one action
set per button, and sends presses to the relay, which does the mapped
action like for a mouse button. Only mapped buttons are taken, at an
overlay-global priority (SteamVR's experimental "Enable global input from
overlays"), and only outside games unless In games is on. Frametop Input
Settings gets a Controllers page to map them.
Gaze mode: a left press while the gaze has the pointer isn't sent at
once. The pointer stops, you drag it onto what you meant with the button
held, and the release clicks there; a press held still for
POINTER_GAZE_HOLD (0.5 s) becomes a real press, for drags. The dot shows
only while the mouse moves it (POINTER_GAZE_SHOW), while a press is held,
and as a pulse per click. Outside games the pointer stays on while gaze
mode is on. ft-gazed takes a third of each lesson's offset instead of all
of it: in the first live test one 6 degree lesson moved everything and put
the next target 7 degrees off. Frametop Input Settings gets a Gaze page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MAGIC pointing (Zhai et al. 1999), off by default: with POINTER_GAZE=1,
"gaze on", or a button mapped to the new gaze_toggle action, the cursor ray
is the corrected gaze from ft-gazed while the gaze has the pointer. Moving
the mouse takes the pointer from where the gaze left it; looking more than
POINTER_GAZE_RETAKE (5 deg) away with the mouse still gives it back. The
pointer is aimed at the gaze, never steered toward it, and only fresh gaze
moves it, so a stopped service or a blink leaves it where it is. A mouse
nudge of up to POINTER_GAZE_NUDGE_MAX (8 deg) before a click is sent to
ft-gazed as a lesson in the eye tracker's error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It works but is only lightly tested, and what's left is mostly tuning its
settings. Frametop Input Settings now says so under the Head follow switch,
and the README, design notes, and button action name say it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Easing the reference toward the head all the time moved the cursor on
every small head movement, so a cursor parked in a corner of the view
drifted. Now nothing moves while the head stays within the leash. Once
the head has been past it for POINTER_LEASH_DELAY (0.2 s, so a glance
out and back doesn't count), the reference eases all the way to where
you face (POINTER_LEASH_RETURN) and the cursor lands back in its place
in the view, then the leash waits again. Leaning inside the leash no
longer moves the cursor either. Leash 0 stays head-locked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The leash only moved its reference when the head reached the leash's end,
so after turning back it sat up to the leash off, and recentring meant
overshooting with the head. The reference now eases toward the head's
facing (POINTER_LEASH_RETURN, 0.2 s) and never lags more than the leash,
so the cursor settles back to its place in the view once the head stops.
The mouse can now move the cursor up to POINTER_FOLLOW_REACH (70 degrees)
from the middle of the view, up from a fixed 40. Both are sliders on the
Pointer page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Off by default. With POINTER_FOLLOW=1 (a switch on the Pointer page of
Frametop Input Settings, or a mouse button mapped to Head follow on/off),
the cursor rides on a reference direction leashed POINTER_LEASH_DEG (10)
from where you face. Within the leash it stays put in the room; past it,
it turns with your head and keeps its offset. A leash of 0 locks it to
your view. Head roll is ignored, the cursor stays within 40 degrees of
the reference, and it holds still in the room while the left button is
down so the head can't nudge a click or a drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Meta tap on a pass-through keyboard toggled the SteamVR dashboard, which
got in the way of using Meta on its own. It's now off unless
META_DASHBOARD=1 is in ~/.config/frametop.conf. Meta as a modifier
(Meta+Shift+R, Meta+Shift+H) is unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the pointer released, the helper still listed overlays by running
vrcmd every second, a new SteamVR client each time, which kept SteamVR
from going to standby. The list now pauses while the pointer is off.
Starting the dev container from one of our services made that service own
it, so stopping the service stopped the container and the desktop's
compositor with it. scripts/container-up.sh starts the container in a
systemd scope of its own before every distrobox enter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The service and menu-entry templates still pointed at the old frametop/
subfolder, so the pointer helper, input relay, and settings apps couldn't
start after a clean install. The pointer helper's install step also failed
when the service was still starting after 3 s; it now waits up to 20 s and
doesn't abort the installer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Several KDE Plasma screens floating in SteamVR, each a real monitor of any
resolution and shape, shown by our own compositor (ft-screens), with a
layout, wrist pinning, and visibility modes; a Bluetooth mouse that drives
all of SteamVR as a room-anchored 3D pointer (input relay, ft-pointer
helper, ft_pointer SteamVR driver); two settings apps; and Bluetooth LE
fixes. Installs on the headset with ./install.sh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
