Reset Screen Layout and Hide/Show Screens both ran ft-layout. Steam lists
entries by program, so Hide/Show launched Reset. Each gets a wrapper.
From PR #17 (only this part of 9618be8; its host_command change is for the
Nix packages).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frametop kept using the headset during games: with gaze mode off, our eye tracker still took
about 60% of a core, remote desktop about 2 cores while on, and KWin kept drawing hidden
screens because ft-screens sent their frame callbacks at 90 Hz. Pausing gives that back, and
resuming brings back only what pausing stopped. It's also a way to keep the gaze service and
our eye tracker off during games, which PR #13 asked for.
Paused (input/game_pause.py, run by the input relay):
- frametop-gaze stops (ft-eyegrab then idles by itself), and hand tracking and remote desktop
stop if they run
- the desktop hides and slows down: ft-screens "pause on" hides every panel and sends KWin a
frame callback once a second; or, with pause_desktop "close", the desktop closes and starts
again on resume
- the relay lets go of the 3D mouse, typing goes to Steam, and mapped buttons and key
combinations do only pause_toggle, steam_menu and commands
Toggled by both thumbsticks clicked together twice (configurable), read passively from
vrserver's web socket (input/vrws.py) so it works in games and takes nothing from them; by the
new pause_toggle action; by input/ft-pause; and, with pause_auto (default on), by a VR game
starting and ending, which the pointer helper now reports ("vrgame 1|0"). Frametop Input
Settings has a Games page for it. update-check.py checks the web socket, and doesn't count a
paused gaze service as failed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
steam/ft-steam menu opens the SteamVR dashboard on Steam's menu, or closes
the dashboard if it's up, without pointer mode: it asks Steam's UI over its
debugging port to show its dashboard overlay (ShowVROverlay, what Steam
calls itself) and focus the Steam frame's left menu (MenuStore.OpenMainMenu).
ft-steam check says whether those calls still exist, and update-check.py
runs it, since a Steam client update can rename them.
The CDP client moves from display-settings/steam_settings.py to
steam/steamui.py, so both use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- desktops.sh uninstall also removes Launch as Standalone's app copies
and the title bar decoration, and Display Settings' uninstall the
profiles' launcher entries; its install writes them back from the
saved profiles (new: ft-layout launchers)
- the README says which settings an uninstall leaves
- the install command is now curl -fsSL https://deejanuz.github.io/
frametop/get.sh | bash (GitHub Pages, from main)
- ft-gaze logs "action manifest ...: ok" instead of "error 0"
Found in a clean install test on the Frame (2026-10-01): uninstall,
then get.sh from the headset into a fresh clone; everything installed
and doctor.sh passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- gaze/tracker/lab/eyes_track.py: nothing used it
- Input Settings: the pointer role backend, whose page was removed
- ft-screens: no log line for every floating-window resize
- hands: ft-hands --help gives the palm-down default (1: off), the
uninstall removes ft-handsctl's link, .frame-job is ignored
- Display Settings: "Save as profile…", not "Save current arrangement"
- two stale comments (ft-pointer's grabprobe, ft-gaze)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A profile is a named layout plus the screens it hides and its apps' windows
(docs/profiles.md). ft-layout save captures them (ft-floatd's "windows",
after the KWin script reports every window as it is now); use opens them:
the screens move, open windows of each app go to their places (on a screen,
maximized or not, or floating), and missing apps start, once and then again
for each window still missing 3 s after the first. Nothing closes.
The desktop starts in FT_PROFILE or default_profile (ft-layout start, from
the session script). Each profile gets a launcher entry (Frametop: NAME, in
SteamVR's Launch a program list) that switches to it or starts the desktop
in it. The relay's profile:NAME action and Input Settings' "Open profile"
entries put one on a key, mouse button, or controller button. Display
Settings' Layout page becomes Layout & profiles: Save as profile, Open
profile, the profile's apps, and Start in profile. Plasma's own session
restore is off in the Frametop session.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens: "conceal <screen|all>" hides a screen on its own, whatever the
visibility mode or the hotkey says, until "reveal"; "concealed" lists them.
(Not "hide N": older builds read anything starting with "hide" as the hotkey.)
ft-layout keeps it per screen ("hidden" in the layout), applies it when it
arranges the screens, and has hide/show N|all and hidden. Display Settings
gets a Shown switch per screen on the Visibility tab. ft-floatd floats a new
window that opens on a hidden screen, and puts a stray window on a screen
that shows. Profiles (next) use it to show only some screens.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A display mount that covers the proximity sensor makes the headset seem
worn, so SteamVR never turned its displays off and they stayed on all
night. The new power service, ft-powerd (frametop-power.service), goes by
use instead: after DISPLAY_OFF_MIN minutes in which the headset and
controllers didn't move and no input device was used, it turns the
backlight off, and the next movement or input turns it back on.
The new Power tab in Frametop Display Settings sets that time and has a
Stay awake while plugged in switch. The switch sets Steam's own "When
Plugged In and Idle -> Sleep after" to Never through Steam's UI, so the
Frame stays reachable remotely while the power button still works.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Named layouts: Save current arrangement in Frametop Display Settings now
asks for a name, and saved layouts are listed with the presets under
Arrangement, with rename and delete next to the list. A named layout is
the custom arrangement under a name: each screen's place relative to
your head, width, curve, and pin, but not resolution or scale. Using one
copies it into the custom arrangement, so desktop start, Meta+Shift+R,
and Arrange now apply it unchanged; "active" remembers the name, and a
plain capture clears it. ft-layout gains save, use, layouts, rename, and
delete. A layout saved with fewer screens than there are now leaves the
others where they were saved last, or where the preset puts them.
Head pin: ft-screens' pin command takes "head" as well as left and
right, and pins the screen to the headset (device 0) where it is, like a
HUD. A head-pinned screen skips the wrist facing rule and shows whenever
the screens do. Carrying it re-pins it to the head on release, like a
wrist pin, so it can be adjusted in VR. The Visibility tab (now
Visibility & pins) sets each screen's pin: in the room, either wrist, or
your head, and the pin command now rejects anything but left, right, or
head (it used to take anything else as left). This removes the "no HUD"
limit from the docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the pointer released, the helper still listed overlays by running
vrcmd every second, a new SteamVR client each time, which kept SteamVR
from going to standby. The list now pauses while the pointer is off.
Starting the dev container from one of our services made that service own
it, so stopping the service stopped the container and the desktop's
compositor with it. scripts/container-up.sh starts the container in a
systemd scope of its own before every distrobox enter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new setting, During VR games: with Always, the screens hide while a VR
game runs and show while the SteamVR dashboard is open (the default), or
stay visible over the game. The hotkey still shows them; a game starting or
stopping resets it. Socket command: ingames hide|visible.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Visible screens kept SteamVR's laser mouse on, which takes the controllers
away from a VR game. Now, by default, that's off while a scene app runs:
the screens stay over the game and the 3D mouse or the dashboard works
them. Frametop Display Settings has the choice (always, except during VR
games, only with the dashboard open); the socket command is controllers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The service and menu-entry templates still pointed at the old frametop/
subfolder, so the pointer helper, input relay, and settings apps couldn't
start after a clean install. The pointer helper's install step also failed
when the service was still starting after 3 s; it now waits up to 20 s and
doesn't abort the installer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Several KDE Plasma screens floating in SteamVR, each a real monitor of any
resolution and shape, shown by our own compositor (ft-screens), with a
layout, wrist pinning, and visibility modes; a Bluetooth mouse that drives
all of SteamVR as a room-anchored 3D pointer (input relay, ft-pointer
helper, ft_pointer SteamVR driver); two settings apps; and Bluetooth LE
fixes. Installs on the headset with ./install.sh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
