Uninstall cleans up after itself; a shorter install command

- desktops.sh uninstall also removes Launch as Standalone's app copies
  and the title bar decoration, and Display Settings' uninstall the
  profiles' launcher entries; its install writes them back from the
  saved profiles (new: ft-layout launchers)
- the README says which settings an uninstall leaves
- the install command is now curl -fsSL https://deejanuz.github.io/
  frametop/get.sh | bash (GitHub Pages, from main)
- ft-gaze logs "action manifest ...: ok" instead of "error 0"

Found in a clean install test on the Frame (2026-10-01): uninstall,
then get.sh from the headset into a fresh clone; everything installed
and doctor.sh passed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

README.md

@@ -22,7 +22,7 @@ You need a Steam Frame with an internet connection, a keyboard (Bluetooth, or th
 3. Run:
 
    ```
-   curl -fsSL https://raw.githubusercontent.com/DeeJanuz/frametop/main/get.sh | bash
+   curl -fsSL https://deejanuz.github.io/frametop/get.sh | bash
    ```
 
    It asks which version you want: stable (the `main` branch, tested releases) or experimental (the `experimental` branch, the newest features, less tested). Then it clones the repo into `~/frametop` and runs `install.sh`. To choose without the question, add `-s -- --stable` or `-s -- --experimental` after `bash`. By hand, the same is `git clone https://github.com/DeeJanuz/frametop.git ~/frametop`, then `cd ~/frametop` and `./install.sh` (add `--branch experimental` to the clone for experimental).
@@ -145,7 +145,7 @@ This writes `frametop-report-<date>.txt` with version numbers, service states, s
 Run the same command again. It updates `~/frametop` to the latest of the version you have (or switches, if you pick the other one) and installs it:
 
 ```
-curl -fsSL https://raw.githubusercontent.com/DeeJanuz/frametop/main/get.sh | bash
+curl -fsSL https://deejanuz.github.io/frametop/get.sh | bash
 ```
 
 Or by hand: `cd ~/frametop && git pull && ./install.sh`.
@@ -168,6 +168,8 @@ gaze/tracker/install.sh uninstall      # if you installed our own eye tracker's
 gaze/probe/install.sh uninstall        # if you installed the gaze probe
 ```
 
+Your settings stay: `~/.config/frametop.conf`, `frametop-input.json` (button maps and key combinations), `frametop-layout.json` (the layout and profiles), `frametop-float.json`, and `frametop-remote/` in `~/.config`, and the gaze calibration in `~/.local/state/frametop/gaze`. So does the desktop's own Plasma setup, in `~/.config/frametop`. Delete them too for a clean slate.
+
 ## How it works
 
 A Plasma session runs nested inside ft-screens (`screens/`), a small Wayland compositor. KWin opens one window per screen, ft-screens sets each window's size, and each frame goes to SteamVR as an overlay without being copied. An input relay (`input/`) keeps Bluetooth mice working in SteamVR and feeds the mouse to the 3D pointer, which drives a virtual SteamVR controller (`pointer/`). A power service (`power/`) turns the displays off while the headset isn't used. [docs/reference.md](docs/reference.md) covers each piece, and [docs/design.md](docs/design.md) explains the design and what we learned about SteamVR on the Frame. [docs/hazards.md](docs/hazards.md) lists known ways the input handling can go wrong.

desktops.sh

@@ -40,7 +40,12 @@ $running && echo 'started' || { echo 'failed:'; tail -20 $log; exit 1; }" ;;
 sed 's|@SESSION@|$session/frametop-session.sh|' $session/deckard-nested-desktop.desktop > ~/$override
 [ -f ~/.config/frametop.conf ] || cp $session/frametop.conf.example ~/.config/frametop.conf
 echo \"installed ~/$override\"; grep ^Exec= ~/$override; echo; cat ~/.config/frametop.conf" ;;
-  uninstall) "$frame" --host "rm -f ~/$override && echo 'removed; the launcher uses the stock desktop again'" ;;
+  uninstall)
+    # Also what the session puts in place at each start: Launch as Standalone's app copies and
+    # the title bar decoration (float/ft_apps.py, decoration/).
+    "$frame" --host "rm -f ~/$override
+rm -rf ~/.local/share/frametop/apps ~/.local/share/kwin/decorations/kwin4_decoration_qml_frametop
+rmdir ~/.local/share/frametop 2>/dev/null; echo 'removed; the launcher uses the stock desktop again'" ;;
   screens)
     [[ ${2:-} =~ ^[1-9]$ ]] || { echo "usage: $0 screens N   (1-9)" >&2; exit 2; }
     "$frame" --host "set -e; f=~/.config/frametop.conf

display-settings/install.sh

@@ -17,10 +17,12 @@ case ${1:-install} in
     on_frame "chmod +x display-settings/ft-display-settings layout/ft-layout layout/ft_layout.py
 mkdir -p ~/.config/frametop
 kwriteconfig6 --file ~/$shortcuts --group services --group ft-layout-reset.desktop --key _launch 'Meta+Shift+R'
-kwriteconfig6 --file ~/$shortcuts --group services --group ft-screens-toggle.desktop --key _launch 'Meta+Shift+H'"
+kwriteconfig6 --file ~/$shortcuts --group services --group ft-screens-toggle.desktop --key _launch 'Meta+Shift+H'
+layout/ft-layout launchers  # each profile's entry (Frametop: NAME), if there are profiles"
     echo "installed: Frametop Display Settings, Reset Screen Layout (Meta+Shift+R), Hide/Show Screens (Meta+Shift+H)" ;;
   uninstall)
     on_frame "rm -f ~/$apps/ft-display-settings.desktop ~/$apps/ft-layout-reset.desktop ~/$apps/ft-screens-toggle.desktop
+rm -f ~/$apps/frametop-profile-*.desktop  # the profiles' entries (the profiles stay in ~/.config/frametop-layout.json)
 [ -f ~/$shortcuts ] && for f in ft-layout-reset ft-screens-toggle; do kwriteconfig6 --file ~/$shortcuts --group services --group \$f.desktop --key _launch --delete; done
 echo removed" ;;
   *) echo "usage: $0 [install|uninstall]" >&2; exit 2 ;;

gaze/ft-gaze.cpp

@@ -461,7 +461,10 @@ int main(int argc, char **argv) {
     vr::VRActionSetHandle_t set = vr::k_ulInvalidActionSetHandle;
     input->GetActionHandle("/actions/gaze/in/gaze", &gaze);
     input->GetActionSetHandle("/actions/gaze", &set);
-    std::fprintf(stderr, "ft-gaze: action manifest %s: error %d\n", manifest.c_str(), int(me));
+    if (me == vr::VRInputError_None)
+        std::fprintf(stderr, "ft-gaze: action manifest %s: ok\n", manifest.c_str());
+    else
+        std::fprintf(stderr, "ft-gaze: action manifest %s: error %d\n", manifest.c_str(), int(me));
 
     EyeFile eyes;
     const bool haveMmap = eyes.Open();

get.sh

@@ -2,7 +2,7 @@
 # Frametop's one-line installer. In a terminal on the Steam Frame (Konsole in the desktop, or
 # over SSH):
 #
-#   curl -fsSL https://raw.githubusercontent.com/DeeJanuz/frametop/main/get.sh | bash
+#   curl -fsSL https://deejanuz.github.io/frametop/get.sh | bash
 #
 # It asks which version to install, clones the repo into ~/frametop (or updates the clone
 # that's there), and runs its install.sh. Run it again to update, or to switch versions.
@@ -18,7 +18,7 @@ set -euo pipefail
 usage() {
   cat <<'EOF'
 usage: get.sh [--stable | --experimental] [--dir DIR] [--clone-only] [--yes] [--no-bluetooth]
-piped: curl -fsSL https://raw.githubusercontent.com/DeeJanuz/frametop/main/get.sh | bash -s -- [options]
+piped: curl -fsSL https://deejanuz.github.io/frametop/get.sh | bash -s -- [options]
 EOF
 }
 

layout/ft_layout.py

@@ -58,6 +58,7 @@ Usage (on the Frame host; Frametop Display Settings calls it too):
   ft-layout default NAME|none        the profile the desktop starts with
   ft-layout layouts                  list the named layouts (* = the one in use)
   ft-layout rename OLD NEW | delete NAME
+  ft-layout launchers                write each profile's launcher entry again (and drop stale ones)
   ft-layout plan                     print the arrangement as JSON (no VR needed)
   ft-layout scale                    per-screen scale, positions (as the screens are around
                                      you), and primary to KWin
@@ -1059,6 +1060,8 @@ def main(argv):
                 delete_named(layout, argv[2])
             save_layout(layout)
             write_launchers(layout)
+        elif cmd == "launchers":
+            write_launchers(load_layout())
         elif cmd == "default" and len(argv) == 3:
             layout = load_layout()
             if argv[2] == "none":