An interrupted review pass pointed at four problems in the pill's dialog, each
confirmed against the Frame:
- The offer to add the Frame's LAN address appended it after the Tailscale name,
which then kept winning on that network, so nothing changed. The offer now adds
it first in the list (address-add takes first: true); away from home the
Tailscale name still leads. A tested address that ranks above the one in use
gets a Use now button that reconnects through it.
- A half-typed edit was thrown away when the connection state changed after
focus left the input, and when the server refused the save. The edit row now
stays until it is saved or cancelled.
- Pressing Enter twice sent the update twice.
- The offer's button could act on the previously selected headset.
Keyboard focus also stays on the same button of the same address when the rows
are rebuilt.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
ssh's %C hashes only address, user and port, so two headsets reached at one
address shared a ControlMaster and one's commands could run on the other: the
ControlPath now names the headset. Another Frame Control server choosing a
different headset no longer moves this one's commands mid-install.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every change now takes a lock file shared across processes and starts from
what's on disk; reads pick up a newer file.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- While the connector is taking a queued reconnect off its list, the old
connection no longer counts as live, so no install starts on it.
- Importing a block without a Port takes the port ssh would really use
(ssh -F <config> -G), e.g. one a later Host * sets.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A command that fails after a switch doesn't make the connector drop the new
headset's connection.
- On first import, the app keeps using the `frame` headset even when Set Up
Connection put another block above it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Terminals, power and a reconnect's probes use the route commands have now
(a pinned bare-alias destination, a login change still deferred).
- Saving port 22 keeps an explicit Port line where there was one.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Removing every headset leaves none in use (commands fail at once) instead of
falling back to the `frame` alias.
- ssh goes to the IP that answered for IPv6 too, with a link-local address's
interface (verified: frame.local over fe80::…%en9 on the real Frame).
- Find results only show in the panel of the headset they were for.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A switch publishes the new headset at once, so the page clears the old one's
panels and the lists behind them (games, store, Android apps, screenshots).
- The page names the headset its changes are for (X-Frame-Device); the server
refuses one meant for a headset it has switched away from (409).
- A rejected address edit changes nothing.
- Test now goes to the IPv4 address that answered, like the connection.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A switch clears every headset-specific list and its buttons at once.
- SSH goes to the IPv4 address that answered the probe, not the name again.
- A rejected headset edit changes nothing.
- The SteamOS/Lepton builds recorded in reports are read again per headset.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Attempts carry a generation: one overtaken by a switch, a removal or a login
change routes nothing back to the old headset and can't report connected.
- Removing the active headset or changing its user/port reroutes at once,
before anything that can fail.
- One known_hosts file per headset (~/.ssh/frame-control-hosts/<id>):
forgetting one headset's key can't drop another's, whoever else writes.
- learn() checks, under the config lock, that the block is still what the
attempt started from before writing to it.
- A switch stops live video and drops captures from the previous headset.
- A probe shares its time between the addresses a name resolves to.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Switching headsets is serialized with the start of any install; background
work counts as running from before its thread starts. use() reroutes every
command at once and makes ensure() wait for the new headset.
- A new user or port reroutes commands even if the attempt then fails.
- ~/.ssh/config edits take a lock file shared with Set Up Connection
(frame_connect.py and connect.sh, which now also writes atomically).
- A finished attempt no longer writes its older settings over a change Set
Up Connection made meanwhile.
- Pin edits are locked and swapped atomically.
- A bare alias behind ProxyJump/ProxyCommand is left to ssh to reach.
- The page drops answers about the previous headset after a switch; the
header switcher takes clicks in the macOS title bar.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- No switching headsets (or changing the active one's user/port, or removing
it) while installs run: they read the ssh settings step by step.
- Switching reroutes every command to the new headset at once, even if it
never answers.
- ~/.ssh/config edits are serialized, use unique temp files, and back off if
another program wrote the file meanwhile.
- stop() ends a handshake in progress and joins the connector.
- Pinned keys are written unhashed (HashKnownHosts=no); hashed ones are still
found and forgotten via ssh-keygen.
- Set Up Connection changing a headset's user or port updates the registry.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Frame Control can now manage more than one Steam Frame, and reach each at any
of several addresses (LAN IPs per network, its .local name, Tailscale). A
connector in the server tries them all at once, picks the best one that
answers, follows ssh -v through each stage (network, finding, SSH, identity,
login) and streams that to the page. The header shows it live; a new Devices
tab (key 5) manages headsets, addresses and network names.
- ui/frame_devices.py: registry in devices.json, imported from the managed
~/.ssh/config blocks; per-headset host key pinning; config block updates.
- ui/frame_network.py: gateway IP+MAC fingerprint, Wi-Fi name, Tailscale.
- ui/frame_link.py: the connector, Test now, Tailscale/mDNS discovery, API.
- server.py: ensure_master delegates to the connector; /api/connection,
/api/connection/events (SSE), /api/devices.
- Electron: headset switcher and Devices item in the Frame menu.
- frame_connect.py --alias; FRAME_CONTROL_DATA_DIR / FRAME_CONTROL_SSH_DIR
keep tests off real data.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
