At 1260 to 1400 px wide the header was a few pixels too tight and the pill read
"Connected · Tails…"; on a phone it read "Connected · T…". The status word now
always shows whole: when the route doesn't fit beside it, the route drops out
instead of being clipped. The wordmark gives way a little earlier so the route
shows at every desktop width above 960 px, and the smallest phones lose the
logo rather than squeeze the pill.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Mac in the headset's picture quality moves into the panel with a label, and the
panel switcher's Open in headset button sits under its list, so neither heading
wraps in a narrow column. Headings line up across panels whether or not they
hold a button. An odd last figure in a stats grid spans the row instead of
leaving a hole. The battery menu says which temperature is the battery's.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The pill says plainly whether the headset is connected and how
("Connected · Tailscale", or the network's name), and never shows a
truncated address. Its dialog now leads with that, then lists the headset's
addresses with what each answered; they can be added, edited, reordered and
removed right there, and a new one is tested straight away. When the Frame
reports a LAN IP on this computer's network that isn't saved, it offers to
add it, so at home the app connects directly rather than over Tailscale.
The connection steps and this computer's network fold away while it's
connected and open when it isn't. Retry now and Set Up Connection only show
when they'd help; the buttons stay in reach when the dialog scrolls.
On the Devices tab the SSH alias, user, port and Forget identity move under
Advanced, and the address kind is worked out from the address. Report a
problem is a speech bubble rather than a warning sign.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The page now scrolls between the header and the Activity bar on a computer,
so the bar never covers content, and nothing overflows sideways from the
760 x 560 minimum up. The header gives way as the window narrows: the
wordmark goes, the tabs tighten, and below 960 px the logo, Refresh (R still
works) and the pill's second line go. Phones keep scrolling the window.
The battery shows once, in the header chip. Clicking it opens a menu with
the headset's storage, memory, temperature, Wi-Fi, uptime, SteamOS build and
services; the big battery card is gone from Home, and the VR performance
table no longer repeats battery and temperature.
Heading rows wrap their buttons onto a new line instead of squeezing the
heading, and every drop-down is dark.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Preserve the complete store, artwork, telemetry, input, media and agent route table alongside the newly landed VR utilities and performance HUD.
Co-Authored-By: GPT-6 Astra <noreply@openai.com>
Keep the union of server routes, desktop resources and responsive controls. Preserve OpenXR install defaults and telemetry hooks alongside library artwork. Adapt the resource test to single-file entries and avoid a completed-refresh race in the F-Droid test.
Co-Authored-By: GPT-6 Astra <noreply@openai.com>
Also from review: a SteamVR build without the timing exports can't break status
(AttributeError), and the device test class runs when the file is run directly.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Live view: a Desktop view that stays still, and Control to tap on the Frame
The live view gets a second source and a way to use the Frame from it:
- Desktop: the app panel in use in the headset, streamed from its own window
(x11grab of gamescope's redirected window), so it doesn't move as the
wearer looks around. A picker shows any other panel, view only.
- Control: on the Desktop view a tap or click lands exactly where you put it;
drag is a mouse drag, press and hold right-clicks, two fingers scroll, and
on a computer the mouse, wheel and keyboard work directly. On the headset
view the view is a trackpad. A text field and key row type from a phone.
Input goes through gamescope's own EIS socket (the way Steam feeds Remote
Play input) with the libei already on the image: ui/frame_touch.py, over
the same long-lived ssh machinery as the keyboard agent, nothing to
install. It reaches the panel that has focus on either X display, which
the KDE Connect route can't. Verified on the Frame and from the iPhone app
in the Simulator.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Control: fixes from review
- Keys held on the Frame are released with buttons when Control stops or
the view loses focus; keys for the Frame no longer trigger Frame Control's
own shortcuts.
- Taps only act when the picture on screen is the panel in use; positions,
presses, keys, text and scrolls name their panel (display and window: ids
repeat across :0 and :1, told apart by pid), and the Frame drops them if
focus has moved on. Releases always go.
- While connecting, a tap keeps its position; on an error only releases wait
and retries back off; trimming a long queue never drops a release.
- Lifting one of two scrolling fingers ends the scroll; a cancelled touch
isn't a tap; clicks and holds on the bars around the picture do nothing.
- A capture loop from before a Live restart can't stop the new video.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Control: close the targeting gaps from the second review
- The focused panel's display comes from GAMESCOPE_FOCUS_DISPLAY (gamescope
packs ":1" into the first value), so a window id repeated across :0 and :1
can't be mistaken; the pid is only the fallback.
- Presses, keys, text and scrolls read focus afresh on the Frame; only moves
use a reading up to a second old.
- A gesture remembers the panel it started on and does nothing more if that
stops being the one in use; a press with no panel to aim at isn't sent.
- Opening a screenshot clears the panel Control would act on; switching to
another app releases held keys and buttons.
- Trimming keeps a click with its position; the error backoff holds for new
input too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Control: fixes from the SWE-2 Max review
- The Frame side tracks keys as well as buttons and lets go of both when the
session ends.
- A stale tap tells the page, which re-reads the panels at once.
- A paused input device waits instead of ending the session; only a
disconnect does. An OS error on one event skips it.
- Presses check focus with two property reads and do the full lookup only
when it changed.
- Writes to an agent's stdin are serialized, so two devices sending at once
can't tear a line (the keyboard agent too).
- Connecting gives up with a message after 15 s instead of hanging on
"Connecting…"; text goes in 100-character pieces so releases don't wait
behind a long paste; a cancelled mouse gesture releases what's held.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Control: stale clears, pauses reconverge, pastes split per request
- The Frame says it has caught up as soon as an aimed event lands after a
stale one, so the page stops re-reading the panels.
- After a device pause it lets go of everything it holds (releases that
arrived while paused were dropped), and waits for the device once per
batch, not once per event.
- The quick focus check no longer freshens the panel geometry's age.
- Each request carries at most about 100 characters of text.
- Turning Control off while it connects doesn't report an error.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* frame_touch: build the socket path on the Frame, so Windows can import it for tests
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* frame_touch: any event that goes through clears the stale flag
A trackpad move names no panel, so waiting for an aimed event could leave
the page re-reading panels for the rest of the session; a release still
aimed at the old panel doesn't count.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- An upload's answer arriving after a switch opens nothing; the APK
alternatives dialog installs on the headset the APK was checked for.
- A handshake that goes silent (e.g. a jump host's forward hanging) moves on
to the next address.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A jump host's own "Authenticated to" line no longer counts as the headset's,
and a master that logs in but doesn't start lets the next address be tried.
- Devices tab changes refresh through the ordered list load, so a late answer
can't undo a newer selection.
- A probe's time out starts after the name lookup: macOS can take 5 s to look
up a .local name (found on the real Frame once its USB link went away).
- An attempt's ending is published from a method, not a return in finally.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A switch the server refuses no longer drops answers the page is waiting for
(an install's job id): only an actual change of headset does.
- Test now goes through a jump host when the alias uses one.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A set-up headset whose alias goes through a jump host (ProxyJump or
ProxyCommand in ~/.ssh/config) is reached through it, address by address,
still pinned per headset.
- A refused switch puts the header's switcher back on the headset in use.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A bare alias's route is pinned to where ~/.ssh/config sent it when it was
routed (HostName, Port, User), so editing that file can't move an install.
- Renaming during an install is allowed: only a real user or port change waits.
- The Devices tab follows a network change even while the headset is offline.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- 'Refresh artwork' (settings) and the API's refresh-art --all cover devkit
titles as well as Android apps; frame_titles.py gains refresh-art ID|--all.
- Apps and titles without complete Steam artwork are flagged (art_missing):
the app shows 'Add artwork', and the CLIs' list prints the refresh command.
- When the app lists them and Steam answers, Frame Control re-applies their
art in the background (at most every five minutes), e.g. for a title Steam
registered after an install made while it wasn't running.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Removing or moving the active headset's address waits for running installs,
like switching.
- A volume change still waiting to be sent goes to the headset whose slider
it was, and a switch cancels it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A title waiting its turn to be read stays with the headset it was dropped
on, and is dropped if the app switches meanwhile.
- Probes still finishing from an earlier attempt can't overwrite the rows of
a newer one.
- The FRAME_ALIAS the server started with stays on the list after switching
away, so it can be picked again.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A batch of dropped files stays with the headset it was dropped on, and
stops if the app switches.
- Removing or moving the address in use reroutes at once; a headset with no
addresses reaches nothing rather than whatever ~/.ssh/config says.
- A late answer to an older device-list request is ignored.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Resolve CLI usage and POST table conflicts. Store installs now hand the
source's own image URLs (icon, banner, screenshots) to frame_android.install
as Steam artwork; before, they passed UI proxy paths (or nothing), so every
store install fell back to generated art.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- Removing every headset leaves none in use (commands fail at once) instead of
falling back to the `frame` alias.
- ssh goes to the IP that answered for IPv6 too, with a link-local address's
interface (verified: frame.local over fe80::…%en9 on the real Frame).
- Find results only show in the panel of the headset they were for.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- The headset a change is meant for is checked and the work counted in one
step, so a switch can't slip in between (uploads too).
- A sideloaded title read on one headset can't be installed on another; open
confirmations close on a switch.
- The only headset can't be removed while its ssh alias stays behind.
- Answers about the previous headset are dropped without touching panels; the
catalogue's Installed tags are rebuilt for the new headset.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- A switch publishes the new headset at once, so the page clears the old one's
panels and the lists behind them (games, store, Android apps, screenshots).
- The page names the headset its changes are for (X-Frame-Device); the server
refuses one meant for a headset it has switched away from (409).
- A rejected address edit changes nothing.
- Test now goes to the IPv4 address that answered, like the connection.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
install_obb needs the app's running instance, which doesn't exist straight after
install, so the store no longer calls it there. The install result says the app
needs its game data; after opening the app once, 'Add game data' copies the
downloaded OBB files (a background job).
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Adding a repository downloads and verifies its whole index, so it now runs as a
job (runJob in the UI) and reports 'Trusted on first use: <fingerprint>' when
no pin was given. fdroidrepos:// links pass the server check, as documented.
Jobs report SourceError messages without a 'SourceError:' prefix.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Searches no longer wait for (or fail on) a refresh of an expired index; the
store notes which sources show saved listings. A failed refresh keeps the old
index and is retried after 10 minutes.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
