Merge pull request #16 from saphid/keep-awake

Keep the Frame awake during agent work

docs/how-the-frame-works.md

@@ -55,6 +55,7 @@ Lepton (Android 11, podman container "lepton-dev") ← its own panel, app 305600
 | **Tools on the image:** Python 3.12.3, `ffmpeg`, `openssl`, `curl`, `rsync`, `zip`/`unzip`, `flatpak`, `wpctl`, `podman`. **No `adb`.** `steamos` is uid 1000, in `wheel`, and sudoers has `%wheel ALL=(ALL) ALL`, so `sudo -S` takes the Developer Mode password on stdin. **Verified 2026-09-27.** | Running Frame Control's server on the Frame (`FRAME_LOCAL=1`, [iphone.md](iphone.md)) |
 | **Each Lepton instance is a podman container** named `lepton-steamlaunch-<instance id>`, labelled with its ADB port (`podman ps --format '{{.Names}} {{.Labels.adb_port}}'`). `podman exec <container> /system/bin/sh -c '…'` runs Android's shell inside it with no adb at all (used for `pidof` and `logcat` by the app tester). Running `wm size`/`wm density` that way is untested. **Verified 2026-09-27.** | `ui/frame_android.py`, the iPhone app's display settings |
 | **Asleep means off the network.** In standby the Frame stops answering on its LAN address, `frame.local` and Tailscale alike (`Host is down`, `No route to host`, timeouts), and ping fails. It was unreachable for about 2.5 hours until woken. Nothing over SSH can wake it. **Verified 2026-09-27.** | Frame Control's offline banner and retries |
+| **What puts it to sleep is Steam's idle timer**, not logind. The journal shows `steamui_system: Switching to power state: [ k_ESystemPowerState_Sleep ] reason: 'ComputeNextPowerState: active: 3600 < 3600 (k_EACState_Connected)'`, then Steam suspends. SSH work doesn't count as activity. The timers are the client settings `system_idle_suspend_ac_sec` (3600) and `system_idle_suspend_battery_sec` (900); 0 means Never (Settings → Power → Sleep after inactivity). They can be written over DevTools the way the settings page does. logind refuses a `systemd-inhibit --mode=block` sleep lock from an SSH session (`Interactive authentication required`) but accepts one started with `systemd-run --user`. `scripts/keep-awake.sh on|off|status` does both and restores the old timers on `off`. **Verified 2026-09-28**, BUILD_ID 20260925.6191901. Whether Steam's suspend honours the inhibitor on its own is **inferred** (polkit gives `steamos` no `suspend-ignore-inhibit`), not tested. | Keeping the Frame awake for agent work |
 | **Battery at full on a charger** can read `Discharging` at about 0 W (for example 99 %, 0.0 W, USB-C PD 18 W). Treat under 0.5 W on a charger as "not charging", not "draining". **Verified 2026-09-27.** | Frame Control's battery card |
 | **The OS image is downloadable.** Valve's recovery images for the Frame are at `https://steamdeck-images.steamos.cloud/recovery/`. The root filesystem inside is btrfs, and it runs as an SSH test target on ARM64 Linux without the headset (`tests/frame-container/frame-image.sh`). **Verified 2026-09-27.** | [recovery-and-images.md](recovery-and-images.md) |
 | **Boot / recovery menu.** Hold Power ~10 s until the LED goes off, then power on while holding the **AUX button on top of the Power button** (not the volume keys) until a text menu appears. Entries: `Current` (SteamOS-A/B + build), `Previous` (the other A/B slot), `Boot from USB`, `Repair Steam Installation`, `Erase User Data` (factory reset), `ADB mode`, `Battery Ship Mode`. It auto-boots `Current` after a ~15 s countdown. **Volume Up/Down (left side) move, AUX (right side) selects.** For a boot loop, Valve says pick `Previous` (keeps user data); then `Repair Steam Installation`; `Erase User Data` wipes `~` (SSH keys, Tailscale, Flatpaks, T3 setup). Last resort is a full re-image, two ways: (1) USB: write `steamframe-oobe-repair-<build>.img.bz2` to an 8 GB+ USB-C stick (Balena Etcher on the Mac), pick `Boot from USB`, then use "Wipe Device & Install SteamOS" / "Repair SteamOS" (keeps games and personal content) from the recovery desktop; (2) cable/EDL: `steamframe-oobe-repair-qdl-<build>.tar.gz`, run `flash.sh` (Linux) or `flash.cmd` (Windows), then with the Frame off for 10 s hold Power + Vol Up + Vol Down for 10 s and plug it in; it reflashes and reboots. Both images: `https://steamdeck-images.steamos.cloud/recovery/` (build 20260922.5153644, 0.3.0, 3.8 GiB each, no published checksums); local copies in `~/Downloads/steam-frame-recovery/`. File names, checksums and what's inside: [recovery-and-images.md](recovery-and-images.md). Source: Valve's [SteamOS Recovery FAQ](https://help.steampowered.com/en/faqs/view/1B71-EDF2-EB6D-2BB3) and [Installation and Repair FAQ](https://help.steampowered.com/en/faqs/view/65B4-2AA3-5F37-4227), plus a menu photo in [EloiStree/HelloSteamFrame#9](https://github.com/EloiStree/HelloSteamFrame/issues/9). **Inferred** (Valve docs, 2026-09-26); not yet tried on our Frame. | Recovering from a boot loop |