The gaze service ran ft-gaze and our own eye tracker all the time: with gaze mode off, ft-eyes
still took about 60% of a core, and ft-eyegrab, ft-gaze and ft-gazed 3 to 4% each. Now ft-gaze
and our tracker run only while gaze mode is on and someone wears the headset, while a check or
the calibration is open or asked for, or under a "wake" lease, which the Gaze page of Frametop
Input Settings renews while it's open. 30 s after the last use they stop, and the frame grabber
idles with our tracker.
- The pointer helper answers "gaze ? headset" with worn|away (SteamVR's activity level for the
headset); an older helper answers it as before, and the service then goes by gaze mode alone.
- A quick check, calibration, or fit check asked for while idle wakes the tracker and opens once
it sends; the automatic calibration waits quietly while it starts.
- Status has "awake" and "idle" (why), and the Gaze page shows it.
- gaze/test/idle-test.py runs the service with a fake helper and ft-gaze, offline.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frametop kept using the headset during games: with gaze mode off, our eye tracker still took
about 60% of a core, remote desktop about 2 cores while on, and KWin kept drawing hidden
screens because ft-screens sent their frame callbacks at 90 Hz. Pausing gives that back, and
resuming brings back only what pausing stopped. It's also a way to keep the gaze service and
our eye tracker off during games, which PR #13 asked for.
Paused (input/game_pause.py, run by the input relay):
- frametop-gaze stops (ft-eyegrab then idles by itself), and hand tracking and remote desktop
stop if they run
- the desktop hides and slows down: ft-screens "pause on" hides every panel and sends KWin a
frame callback once a second; or, with pause_desktop "close", the desktop closes and starts
again on resume
- the relay lets go of the 3D mouse, typing goes to Steam, and mapped buttons and key
combinations do only pause_toggle, steam_menu and commands
Toggled by both thumbsticks clicked together twice (configurable), read passively from
vrserver's web socket (input/vrws.py) so it works in games and takes nothing from them; by the
new pause_toggle action; by input/ft-pause; and, with pause_auto (default on), by a VR game
starting and ending, which the pointer helper now reports ("vrgame 1|0"). Frametop Input
Settings has a Games page for it. update-check.py checks the web socket, and doesn't count a
paused gaze service as failed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An X11 window in a Flatpak can give KWin an app id with no desktop file:
RustDesk's says com.carriez.flutter_hbb (its GTK application id), and the
Flatpak's desktop file is com.rustdesk.RustDesk. A profile recorded that
id, so it couldn't relaunch the app (PR #16 keeps that from killing
ft-floatd's socket). And the window's pid is the sandbox's own, so a
launched window matched neither by process nor by app id, and didn't
float.
desktop_name() finds the desktop file whose StartupWMClass names the
window's class (or app id) when the app id has none. Capture records
that name, a profile claims open windows by it, and a launch's window
matches by it.
Profiles saved before this keep the old id; save them again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 3D mouse drives SteamVR's laser through the ft_pointer virtual
controller, so its events reach the screens the same way a controller's
do. The filter held every press, which turned the mouse's short drags
(selecting a character or two, nudging a slider) into clicks. Mark
button events from hand controllers and start the filter only on those.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
container-up.sh starts the dev container in a scope of its own, so
distrobox enter finds it running and skips its wait for distrobox-init.
On a fresh install, init was still setting up passwordless sudo when
dev-container.sh ran sudo dnf install, and sudo asked for a password
with no terminal to read it from. container-up.sh now waits for
container_setup_done itself, and the container's sudo calls use -n,
so a password prompt fails at once with a clear message.
Fixes#9
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A user on a fresh install got "Calibration failed: only 0 of 21 dots" with
no reason. The installer never installed our tracker, so gaze used
SteamVR's, and the only way SteamVR's tracker rejects a dot is losing an
eye for most of the look. The panel just showed a red ring.
- install.sh: step 9/10 installs our tracker (gaze/tracker/install.sh)
after gaze mode, yes by default; it needs sudo, so --yes runs it only
when sudo won't prompt. If it fails, gaze keeps SteamVR's tracker.
Configs that still say GAZE_TRACKER=steam (the old template) are asked
whether to switch.
- GAZE_TRACKER=auto, the new default: ours when it's installed (the
frame grabber, its unit, and ft-eyes' Python), else SteamVR's.
ft-gazed rechecks every second, so installing it switches over. Input
Settings lists Own tracker first as recommended, and says how to
install it when it's missing (checking the host's /etc through
/run/host from the dev container).
- The calibration panel has a note line, orange over the instructions:
why a dot wasn't taken (an eye lost, a blink, the eyes disagreeing for
SteamVR's tracker, from steady_samples' new drop counts; ft-eyes' reply
for ours), what a click is still waiting for after 1.5 s, and a failed
calibration's most common reason, which the Gaze page shows too.
steady_samples keeps the same samples as before (checked on 2037
windows of recordings); a lost eye is named before a blink, since its
openness reads 0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Turning gaze mode on without a calibration opened Calibrate only on the
off-to-on change, and only if it could open right then. With the headset
off, the eye tracker silent, or the panel not built, or with gaze mode
already on when the gaze service started, nothing opened and nothing said
why: the pointer just stayed a mouse.
- The gaze service now checks every second: gaze mode on, no calibration
for the tracker in use, eyes seen -> the full calibration opens. One
that closes unfinished opens again only after the headset comes off and
on, gaze mode off and on, or Calibrate, so it doesn't loop. A start that
fails retries every 10 s.
- Its status says why gaze mode can't work yet (checks.problem): not
calibrated and opening, open, closed unfinished, or can't open and why.
- Input Settings shows that under the Gaze pointer switch, along with the
gaze service not installed or not running and our tracker missing its
frame grabber.
- ft-gazectl on notes a missing calibration.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Key combinations (and mouse and controller buttons) get two new actions:
- steam_menu: Open Steam menu / close dashboard (steam/ft-steam menu).
- command:CMD: run CMD with sh -c, as the relay's service, with layout/,
float/ and steam/ on its PATH. Input Settings offers it for key
combinations as Run a command...
Both work without pointer mode.
A modifier on its own is now a key combination too: a tap, pressed and
released with no other key, mouse button, or scroll in between. A bound
tap sends the desktop F24 before the release, so Plasma's launcher stays
shut. The defaults gain a Meta tap for the Steam menu; this replaces
META_DASHBOARD, which only worked in pointer mode.
input/test/keys-test.py runs the relay against fake devices with every
outgoing socket renamed, so it's safe next to the live relay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- install.sh no longer offers hand tracking (it's heavy on the CPU and
needs more work); hands/ still builds and installs by hand
- the build container drops python3-opencv and python3-numpy, which
only hand tracking's tools used: Fedora's OpenCV pulls in over a GB
- README: a new opening and feature list, the Use section by topic
(screens, mouse, floating windows, profiles, gaze), and new known
limitations
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- get.sh: curl ... | bash asks for stable (main) or experimental,
clones or updates ~/frametop, and runs install.sh; run it again to
update or switch
- install.sh offers gaze mode (step 8, yes by default) and notes what
to do if an SSH connection drops
- Input Settings' Gaze page says when the gaze service isn't installed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- floating-windows.md and profiles.md describe what's built, with what
isn't listed as such; the plans, phases, and branch notes are gone
- hands-migration.md is gone: the move is done; its open items are in
hands/README.md's Known issues
- reference.md: Layout & profiles, every action, key combinations,
floating windows, the gaze pointer, and hand tracking as they are
- design.md gets the KWin findings from floating-windows.md
- README, gaze/README, AGENTS, hazards, gaze-controllers, and the
example config catch up with gaze, hands, and the stuck-key fix
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The gaze checks and calibration in a headset panel (quick, five, full, headset
fit; shared-buffer drawing, click-to-capture), keyboard and mouse gaze clicks
(Meta+J/K, the mouse's buttons alike, mouse moves only while a button is held,
double right/Meta+K tilts a drag), one 55 degree learning limit with a quick
check past it, eye presence for "the headset went on", the gaze probe as a
development tool, and the relay releasing keys the desktop has down that no
keyboard holds.
Conflicts with the profiles: the relay keeps known_action/needs_pointer and
the gaze defaults (Meta+J/K and the float key); Input Settings keeps the
profile actions everywhere and the gaze actions in key combinations only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Check headset fit now runs in the headset panel too ("fitcheck"): a card per
eye (tracked or lost, the tracker's signal, how much of the last 10 s it was
seen) and the hints, from the probe's fitcheck.py, updated at most twice a
second; left click or Meta+J runs its guided check, right click or Meta+K closes
it. So Quick check, Calibrate, and Check headset fit all happen in one place.
The gaze probe moves to the Gaze page's overflow menu as "Gaze probe
(development)", and its app menu entry says it's a development tool. Texts that
sent users to it ("use Calibrate… with Own tracker") point at Calibrate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A drag begun by right during the left's held-back press (or Meta+K during
Meta+J's) now lasts while either button or key is held, so pressing the right
one again is free: it tilts, as a right press does during any mouse drag. Meta+K
during a keyboard drag (held still into one, or the second Meta+K) tilts while
held: the head turns the panel, and the mouse can too; let go and the head drags
again from there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The right button's press is held back like the left's: hold it, the pointer
stops where you look, move onto the target, and the right click comes on the
release (held still, it's a real right press). Right during the left's held-back
press now starts a drag where the pointer is, as Meta+J then Meta+K does, in
place of a right click there; letting go of either drops it. So once you've
moved, the left alone only clicks, and the right starts a drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
POINTER_GAZE_MOUSE_MOVE=held, the default (the Gaze page's Mouse movement
switch, with why it's on): while the gaze has the pointer, moving the mouse
does nothing; it moves the pointer only while a button is held, as a
correction. A bumped or drifting mouse can't pull the pointer off what you're
looking at, and every mouse move is a correction, so lessons aren't polluted by
mouse moves to somewhere else. With the gaze stale for a second, in a game, or
with the headset off, the mouse moves the pointer as usual. "free" is the old
behaviour.
Pressing the right button while the left one's press is held back right-clicks
where the pointer is instead (correct with the left, then right-click); both
releases are then nothing. Meta+J then Meta+K stays a drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drops the quick check's second step (3629681): the user didn't want it, and it
re-entered itself every tick, re-placing and redrawing the panel, which
flickered in the headset.
POINTER_GAZE_NUDGE_MAX is the one learning limit, now 55 degrees by default:
half of the 109 the Frame shows across. The helper measures the correction
itself (raw gaze to click), not the mouse's path; past the limit it isn't
learned and the helper sends "recheck" for the quick check, for the mouse and
keyboard alike. ft-gazed's own limits (8 and 25) follow the setting.
Test, our tracker's 409 clicks since its Sep 29 calibration: a one-dot check
set from any one of them puts the next 2 minutes' clicks within 15 degrees (99%
within 4.2) and the next 10 minutes' within 25, so it gets well under 55.
The panel's dot is still and its capture ring fills in quarters, so it's drawn
again only a few times per dot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After the quick check's capture, in gaze mode, the dot stays where it is in the
room (the panel's new "lock") and the gaze has the pointer again. You put the
pointer on the dot as you'd correct a click, with the mouse or Meta+J and the
head. That click clicks nothing: the helper sends it as "calverify", learned
whatever its size. Over POINTER_GAZE_NUDGE_MAX, the capture runs again, up to
3 times. A right click or Meta+K skips it.
POINTER_GAZE_NUDGE_MAX is now the one limit: 15 degrees by default (was 8),
and ft-gazed's own limits (8 for SteamVR's tracker, 25 for ours) follow it. A
keyboard correction past it isn't learned but opens a quick check ("recheck"),
in place of the 30 degree keyboard limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On the Frame, a SteamOS update replaces SteamVR, KWin, and gamescope with the
rest of the OS image. scripts/update-check.py, run by doctor.sh and report.sh,
checks what Frametop uses from it: the OpenVR interface versions the installed
programs were built against, the vrcmd --overlays format, the eye tracker's
shared memory layout, host files, services, sockets, and the driver
registration. doctor.sh --mark-good records the package versions once things
work, and later runs say what changed and what to try by hand.
The session no longer stops when mesavars.sh or flatpak.sh is missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
KWin's PlacementTracker keeps each window's geometry, full screen and
maximized state per layout of the outputs, and puts windows back when a
layout it has seen comes back. A spare output resizes after its window,
so resizing a floating window back to an earlier size (or changing its
scale, or full screen) made the window and its output flip forever, and
floating or docking one window could move others onto or off a spare.
The KWin script now keeps where each window belongs, reports nothing
while KWin changes the outputs, and on screensChanged puts floating
windows back (and the screens' windows when only spares changed),
cancelling KWin's requests before the app sees them. A size asked for is
held for a second against late answers.
With that: a launched app and a profile get their remembered scale back,
scale steps keep the size in pixels, ft-floatd waits for the end of an
edge resize before resizing the output (KWin cancels the resize on any
output change), a window taken over after a restart keeps its app and
panel density, and `ft-float float ID` asks the script for the window's
current place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- KWin 6.2's scripts have no maximize mode: a window counts as maximized
when it fills its output's maximize area.
- A late event for a window that just closed brought it back into
ft-floatd's table, so a profile "found" it open, floated a window that no
longer existed, and held a slot. The script doesn't report deleted
windows, and ft-floatd ignores events for ids it has seen close.
- Docking a window that came from a screen that's hidden now puts it on the
first screen that shows instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A profile is a named layout plus the screens it hides and its apps' windows
(docs/profiles.md). ft-layout save captures them (ft-floatd's "windows",
after the KWin script reports every window as it is now); use opens them:
the screens move, open windows of each app go to their places (on a screen,
maximized or not, or floating), and missing apps start, once and then again
for each window still missing 3 s after the first. Nothing closes.
The desktop starts in FT_PROFILE or default_profile (ft-layout start, from
the session script). Each profile gets a launcher entry (Frametop: NAME, in
SteamVR's Launch a program list) that switches to it or starts the desktop
in it. The relay's profile:NAME action and Input Settings' "Open profile"
entries put one on a key, mouse button, or controller button. Display
Settings' Layout page becomes Layout & profiles: Save as profile, Open
profile, the profile's apps, and Start in profile. Plasma's own session
restore is off in the Frametop session.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens: "conceal <screen|all>" hides a screen on its own, whatever the
visibility mode or the hotkey says, until "reveal"; "concealed" lists them.
(Not "hide N": older builds read anything starting with "hide" as the hotkey.)
ft-layout keeps it per screen ("hidden" in the layout), applies it when it
arranges the screens, and has hide/show N|all and hidden. Display Settings
gets a Shown switch per screen on the Visibility tab. ft-floatd floats a new
window that opens on a hidden screen, and puts a stray window on a screen
that shows. Profiles (next) use it to show only some screens.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-float launch APP / run COMMAND: ft-floatd starts the app and floats its
first window (matched by process or desktop file name for 30 s) where that
app last floated, or in front of you at the primary screen's density. Each
app's place (pose relative to the primary screen, size in pixels, scale) is
kept in ~/.config/frametop-float.json whenever one of its windows stops
floating; the scale isn't applied yet, since rescaling can loop (written up
in docs/floating-windows.md, Known problems).
Launch as Standalone (float/ft_apps.py): the session writes copies of the
apps' desktop files with that action and puts them first in XDG_DATA_DIRS,
so it shows in the Application Launcher's and the taskbar's right-click menus
in the Frametop desktop only. ft-floatd rewrites them when apps change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gazepanel (gaze/panel) is a SteamVR overlay that stays put in your view and
shows dots at known head-relative directions; the gaze service runs it and
drives it (gaze/gazecheck.py):
- a one-dot quick check 3 s after the headset goes on, when our tracker asks
for a click (reseat), at most every 2 minutes, and from Quick check on the
Gaze page; five dots follow if the next 3 lessons are still over 2 degrees off
- the full calibration (the probe's three rounds, dark to bright) when gaze mode
comes on without one, or from Calibrate; quitting it with still no calibration
turns gaze mode off
Each dot takes the gaze once it has held still for 0.6 s; a left click or Meta+J
takes it at once, a right click or Meta+K closes the panel (the pointer helper
hides its dot and passes those presses on while "calpanel" lasts). Our tracker
gets clicks and its own calibration; SteamVR's gets lessons per eye, or a new
calibration.json.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The decoration's "bottom" property clashed with Item's (KWin refused it).
- No On All Desktops button with one virtual desktop, like Breeze.
- decoration/apply.sh finds the session's D-Bus through plasmashell (KWin's
environment isn't readable), and installs each try under a new name: KWin
keeps a decoration's QML by name until it restarts.
- ft-floatd starts its script with Scripting.start: after a reload, the new
script gets the old one's id while the old one is still being deleted, so
run() on /Scripting/Script<id> went to the old script and the new one never
ran (a second ft-floatd start left floating windows without their script).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frametop's own window decoration (decoration/), a QML decoration for KWin's
Aurorae engine drawn like Breeze, puts a float button left of Close. It's the
Keep Below button with its own glyph: the KWin script floats a window when
keep-below is set and docks it when it's cleared, and keeps the flag set on
every floating window, so the button shows "back to the desktop" there. The
session script installs the decoration for the Frametop desktop only;
decoration/apply.sh switches a running desktop to it or back to Breeze.
Not yet tried in a running KWin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The input relay owns the float key now: float_toggle (Meta+Shift+F unless the
rules have their own key combinations) floats the window under the pointer, or
the active one over the wallpaper, and docks it if it floats. dock_all puts
every floating window back. Both are mappable to mouse and controller buttons,
and work without pointer mode. The KWin script no longer registers a shortcut,
and ft-floatd drops the old one. Key combinations move to Input Settings'
Keyboard page.
docs/floating-windows.md records the decisions from 2026-09-30 (the title bar
button, Launch as Standalone, profiles), and docs/profiles.md plans profiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Steam reads the Frame controllers itself, outside SteamVR's bindings, and every
press and release it sees takes SteamVR out of laser mode, so controller clicks
at the gaze can't be done cleanly (docs/gaze-controllers.md, from the gaze-first
branch's tests).
- Gaze precision and Gaze drag take a mouse button or a key combination only;
the controller source, its aim steering, and POINTER_PRECISION_GAIN,
POINTER_PRECISION_DEADZONE and POINTER_GAZE_DRAG_GAIN are gone.
- The gaze actions (including Gaze pointer on/off) can't be mapped to controller
buttons: the relay ignores them there and doesn't ask the helper for those
buttons, and Input Settings no longer offers them.
- Last used wins in gaze mode too: picking up a controller hands it the laser,
as docs/design.md already said.
- The gaze dot shows all the time (POINTER_GAZE_DOT=always, the default;
moving brings back the old behaviour), with a switch on the Gaze page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
krdp streams every screen, so the VNC screen is now the primary's size and the
FreeRDP window is shifted so the primary fills it (ft-layout remote-view gives
the offset). It resizes and reconnects when the layout changes. With remote
access on, KWin's D-Bus screenshot interface is open too, for scripts that look
at the screens without the headset.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 6f5a23c80f2ecd26e6a96c86b102be36d518ee25)
Hand tracking (ft-camd, ft-hands, and their tools) joins the desktop. The
hands file and ring move to /run/user/UID/frametop-hands/, which ft-screens'
hand cutouts now read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The runtime files move to /run/user/UID/frametop-hands/: the desktop
session deletes /run/user/UID/frametop at every start.
- The cutout copy shader runs at highp: mediump (16-bit on Adreno)
stepped 1.7 texels across a 3440-pixel screen.
- One hand no longer pinches both sides after its left/right call flips
mid-pinch, and --pinch-palm-down (0.6) holds back pinches with the palm
facing down (typing on a lap keyboard).
- ft-camd judges a colour frame fresh by its luma rows only, and logs
per-buffer changes at stale colour frames with FT_CAMD_DEBUG=1.
- hands/run.sh caps skips the setcap when ft-camd already has them.
- The replay tool dumps poses (--poses), and its pinch events carry the
hand id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Floating windows join the keyboard and the hand cutouts. Floating panels
don't get cutouts yet: their panel and popups show crops of the client
buffer (texture bounds), which the side-by-side cutout buffer doesn't
match. KWin gets both the spare outputs and our input method, and the
pointer helper's frametop. prefix already covers the float panels.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fixes#7: SteamVR's keyboard never came up for the desktop's apps, and
opening it for our panels doesn't work well on the Frame (it's Steam's own
panel, mounted in the dashboard's scene, it follows the laser between
panels, and it takes the controllers over to SteamVR's laser).
- KWin starts input/ft-textinput as the desktop's input method. It tells
the input relay when a text field gains or loses focus, and the relay
asks ft-screens to open or close the keyboard. The session drops the
QT_IM_MODULE=xim and GTK_IM_MODULE=xim that the gamescope session sets,
or Qt and GTK apps never report text fields.
- The keyboard is ft-screens' own panel (screens/keyboard.cpp): a US laptop
layout, typed with a controller's laser or the 3D mouse. It opens 0.7 m
in front of you, below your eyes and facing you. It has a grab bar to
move it, a Close key, latching Shift, Ctrl and Alt, and repeat on a held
key. It's drawn into shared DMA-BUFs, so it doesn't flicker. Its keys
reach the focused screen as key presses, so every app takes them.
- It steps aside while the Steam menu or Steam's own keyboard is up and
comes back after. A layout reset closes it, and it doesn't open without
a head pose.
- Frametop Input Settings has a Keyboard page: open it for every text
field, only while no keyboard is connected (the default), only from a
mapped button (the new Open/close keyboard action, for mice and
controllers), or never. A switch keeps it open until you close it.
- The pointer helper treats every frametop.* overlay as a real panel. The
keyboard's shared texture reports 0x0 like SteamVR's scene-graph
controls, and the helper had given it their wide catch radius.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pointer and gaze services need steamvr.service to be running (Requisite=), and ft-pointer, ft-screens, and ft-gaze connect as a background app before switching to overlay, so they never start a vrserver of their own. One started from the dev container never finds the headset, which left a reboot stuck in a loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 51b4e79318)
The pointer and gaze services need steamvr.service to be running (Requisite=), and ft-pointer, ft-screens, and ft-gaze connect as a background app before switching to overlay, so they never start a vrserver of their own. One started from the dev container never finds the headset, which left a reboot stuck in a loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 51b4e79318)
The pointer and gaze services need steamvr.service to be running (Requisite=), and ft-pointer, ft-screens, and ft-gaze connect as a background app before switching to overlay, so they never start a vrserver of their own. One started from the dev container never finds the headset, which left a reboot stuck in a loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 51b4e79318)
- Programs: ft-camd (the camera broker), ft-hands (the tracker), and
ft-handreplay and ft-ringplay for recordings, built by hands/build.sh
into hands/build/ with one Makefile. The first build fetches ncnn at
frame-hands' pinned tag and builds it with the same options.
- ft-camd gets its privileges from file capabilities (CAP_SYS_PTRACE,
CAP_PERFMON, CAP_DAC_READ_SEARCH) that hands/run.sh install sets with
sudo, and drops them once set up. It still works under sudo. It runs
on the host, linked statically, as frametop-camd.service. ft-hands
runs in the dev container as frametop-hands.service. Both start and
stop with SteamVR.
- Files move to /run/user/UID/frametop/ (cam-ring, hands, gestures),
not $XDG_RUNTIME_DIR, which a terminal in the Frametop desktop has
its own of. SIGUSR1 recordings go to ~/.local/share/frametop/hands.
- The calibration is read through /run/host in the container.
- Settings: HANDS_SWAP_SIDES and HANDS_CPUS in frametop.conf.
- install.sh offers hand tracking as an optional last step.
- The container gets jsoncpp-devel, glibc-static, and NumPy and OpenCV
for the Python tools.
- tools/ring.py reads the ring, and models/NOTICE credits the
Apache-2.0 models.
Checked: ft-handreplay gives identical summaries and byte-identical
depth dumps to frame-hands' fh-replay on both 2026-09-29 recordings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frametop Input Settings' Gaze page gets two settings, saved in frametop.conf and
read again by ft-gazed when the file changes: Eye tracker (GAZE_TRACKER: SteamVR's
or our own, frame-eyes' fe-trackd) and Eye bias (GAZE_EYE: auto, left, right).
ft-gazed now combines the eyes, each calibrated on its own: SteamVR's set 2 eyes
with the probe's Left eye and Right eye calibrations, or our tracker's eyes as
they come. Without per-eye calibrations, or with --source, it keeps the older
one-source path. A pointer nudge finds its look from the raw gaze the helper
echoes back; with our tracker it goes to fe-trackd as a click.
The bias leans instead of choosing (gazecal.EyeWeights): on 306 live clicks the
eyes' errors partly cancelled, both together 0.65 deg off against 0.96 and 1.11
for either alone. Left or Right counts that eye twice; auto weights each eye by
its RMS miss at its last 20 nudges, since the calibration's fit picked the wrong
eye on SteamVR's test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
frame-hands (the headset cameras' hand tracking, a separate project so
far) becomes a native component under hands/. docs/hands-migration.md
has what it is, where each part goes, names, build, how ft-camd gets
its privileges (file capabilities), interfaces, open items, and steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A head-locked performance overlay kept catching the 3D mouse. It has no
input method, so SteamVR's laser passes through it, but the helper hit
tests every visible overlay with ComputeOverlayIntersection, and the dot
stuck to it whenever it crossed that corner of the view.
POINTER_IGNORE in frametop.conf now lists overlay keys the helper leaves
out of the collision, comma-separated shell patterns, so "vendor.app*"
covers a whole app, including panels it opens later. The laser starts
just before the cursor point, so an ignored panel nearer to you doesn't
catch it either.
Frametop Input Settings has a new Ignored panels page. It asks the
helper for SteamVR's overlays ("overlays", answered from the list's
thread once vrcmd has run again, even while the pointer is off), groups
them by app, and has a checkbox per panel and one for the whole app.
Frametop's own screens aren't offered, since ignoring one would leave
nothing to click the app on with the mouse. Entries for apps that
aren't open are listed so they can be removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
