The panel drew each picture with SetOverlayRaw, a new texture upload every
time: the full calibration's 1024x768 picture flickered on every change, and
in a live test the headset kept showing the last calibration picture after the
panel had drawn the fit check (2026-10-01). Now, as screens/keyboard.cpp does,
it writes into three linear DMA-BUFs SteamVR imported once (the size of the
biggest panel; texture bounds show the part in use) and switches between them.
A show makes the overlay visible once its first picture is in.
The full calibration's and the five-dot check's dots wait for a left click or
Meta+J while you look at the dot, in place of capturing any steady gaze (which
can be a look somewhere else); no capture ring, no 8 s skip, and the check
closes after 2 minutes without a click. The quick check still captures itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Check headset fit now runs in the headset panel too ("fitcheck"): a card per
eye (tracked or lost, the tracker's signal, how much of the last 10 s it was
seen) and the hints, from the probe's fitcheck.py, updated at most twice a
second; left click or Meta+J runs its guided check, right click or Meta+K closes
it. So Quick check, Calibrate, and Check headset fit all happen in one place.
The gaze probe moves to the Gaze page's overflow menu as "Gaze probe
(development)", and its app menu entry says it's a development tool. Texts that
sent users to it ("use Calibrate… with Own tracker") point at Calibrate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A drag begun by right during the left's held-back press (or Meta+K during
Meta+J's) now lasts while either button or key is held, so pressing the right
one again is free: it tilts, as a right press does during any mouse drag. Meta+K
during a keyboard drag (held still into one, or the second Meta+K) tilts while
held: the head turns the panel, and the mouse can too; let go and the head drags
again from there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The right button's press is held back like the left's: hold it, the pointer
stops where you look, move onto the target, and the right click comes on the
release (held still, it's a real right press). Right during the left's held-back
press now starts a drag where the pointer is, as Meta+J then Meta+K does, in
place of a right click there; letting go of either drops it. So once you've
moved, the left alone only clicks, and the right starts a drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
POINTER_GAZE_MOUSE_MOVE=held, the default (the Gaze page's Mouse movement
switch, with why it's on): while the gaze has the pointer, moving the mouse
does nothing; it moves the pointer only while a button is held, as a
correction. A bumped or drifting mouse can't pull the pointer off what you're
looking at, and every mouse move is a correction, so lessons aren't polluted by
mouse moves to somewhere else. With the gaze stale for a second, in a game, or
with the headset off, the mouse moves the pointer as usual. "free" is the old
behaviour.
Pressing the right button while the left one's press is held back right-clicks
where the pointer is instead (correct with the left, then right-click); both
releases are then nothing. Meta+J then Meta+K stays a drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drops the quick check's second step (3629681): the user didn't want it, and it
re-entered itself every tick, re-placing and redrawing the panel, which
flickered in the headset.
POINTER_GAZE_NUDGE_MAX is the one learning limit, now 55 degrees by default:
half of the 109 the Frame shows across. The helper measures the correction
itself (raw gaze to click), not the mouse's path; past the limit it isn't
learned and the helper sends "recheck" for the quick check, for the mouse and
keyboard alike. ft-gazed's own limits (8 and 25) follow the setting.
Test, our tracker's 409 clicks since its Sep 29 calibration: a one-dot check
set from any one of them puts the next 2 minutes' clicks within 15 degrees (99%
within 4.2) and the next 10 minutes' within 25, so it gets well under 55.
The panel's dot is still and its capture ring fills in quarters, so it's drawn
again only a few times per dot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After the quick check's capture, in gaze mode, the dot stays where it is in the
room (the panel's new "lock") and the gaze has the pointer again. You put the
pointer on the dot as you'd correct a click, with the mouse or Meta+J and the
head. That click clicks nothing: the helper sends it as "calverify", learned
whatever its size. Over POINTER_GAZE_NUDGE_MAX, the capture runs again, up to
3 times. A right click or Meta+K skips it.
POINTER_GAZE_NUDGE_MAX is now the one limit: 15 degrees by default (was 8),
and ft-gazed's own limits (8 for SteamVR's tracker, 25 for ours) follow it. A
keyboard correction past it isn't learned but opens a quick check ("recheck"),
in place of the 30 degree keyboard limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Meta+J hold's correction is always meant, but it went through the mouse's
8 degree nudge limit. Live, our tracker was 12 degrees off and every correction
was dropped without a word. Debug output now says when one is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Steam's eyetracking.txt writes "HMD on" every minute or so with nobody in the
headset, and SteamVR said it was worn for 12 hours straight, so the quick check
opened about 40 times an hour at an empty headset. It now opens when SteamVR's
tracker sees eyes for 3 s after none for 3 s, and closes when they're gone 2 s.
The log reader also drops repeated "HMD on" lines and sub-second offs, so
lessons stop counting as from an older wear every minute.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gazepanel (gaze/panel) is a SteamVR overlay that stays put in your view and
shows dots at known head-relative directions; the gaze service runs it and
drives it (gaze/gazecheck.py):
- a one-dot quick check 3 s after the headset goes on, when our tracker asks
for a click (reseat), at most every 2 minutes, and from Quick check on the
Gaze page; five dots follow if the next 3 lessons are still over 2 degrees off
- the full calibration (the probe's three rounds, dark to bright) when gaze mode
comes on without one, or from Calibrate; quitting it with still no calibration
turns gaze mode off
Each dot takes the gaze once it has held still for 0.6 s; a left click or Meta+J
takes it at once, a right click or Meta+K closes the panel (the pointer helper
hides its dot and passes those presses on while "calpanel" lasts). Our tracker
gets clicks and its own calibration; SteamVR's gets lessons per eye, or a new
calibration.json.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Steam reads the Frame controllers itself, outside SteamVR's bindings, and every
press and release it sees takes SteamVR out of laser mode, so controller clicks
at the gaze can't be done cleanly (docs/gaze-controllers.md, from the gaze-first
branch's tests).
- Gaze precision and Gaze drag take a mouse button or a key combination only;
the controller source, its aim steering, and POINTER_PRECISION_GAIN,
POINTER_PRECISION_DEADZONE and POINTER_GAZE_DRAG_GAIN are gone.
- The gaze actions (including Gaze pointer on/off) can't be mapped to controller
buttons: the relay ignores them there and doesn't ask the helper for those
buttons, and Input Settings no longer offers them.
- Last used wins in gaze mode too: picking up a controller hands it the laser,
as docs/design.md already said.
- The gaze dot shows all the time (POINTER_GAZE_DOT=always, the default;
moving brings back the old behaviour), with a switch on the Gaze page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
frame-eyes, a separate project until now, becomes gaze/tracker:
- ft-eyegrab (was fe-bufprobe) copies the eye-camera frames, read-only, out of
SteamVR's eyetracking process. It runs as the system service
frametop-eyegrab.service, which gaze/tracker/install.sh installs to
/etc/frametop with sudo. It keeps only CAP_SYS_PTRACE, CAP_DAC_READ_SEARCH, and
CAP_CHOWN, and copies frames only while /dev/shm/frametop-eyes-want is fresh,
holding none of the tracker's buffers otherwise.
- ft-eyes (was fe-trackd) runs under ft-gazed in the dev container, with
build/venv's pinned numpy and OpenCV: while Eye tracker is Own tracker, or on
the probe's lease ("eyes SECONDS"). No sudo password or fe-live script at
run time any more.
- lab/ holds the research tools (ft-eyes-score, -e2e, -record, -replay,
-session) and findings.md. Recordings live outside the repo, in
~/.local/share/frametop/eyes/captures; .gitignore catches stray frame dumps.
Its socket is now @ft_eyes, its output /dev/shm/frametop-eyes-gaze, and its state
~/.local/state/frametop/gaze/eyes. On practice1 -> practice2 the whole live path
(ft-eyes-e2e) gives 1.30 deg median and 3.18 for the worst tenth, as before the
move (1.30, 3.21).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frametop Input Settings' Gaze page gets two settings, saved in frametop.conf and
read again by ft-gazed when the file changes: Eye tracker (GAZE_TRACKER: SteamVR's
or our own, frame-eyes' fe-trackd) and Eye bias (GAZE_EYE: auto, left, right).
ft-gazed now combines the eyes, each calibrated on its own: SteamVR's set 2 eyes
with the probe's Left eye and Right eye calibrations, or our tracker's eyes as
they come. Without per-eye calibrations, or with --source, it keeps the older
one-source path. A pointer nudge finds its look from the raw gaze the helper
echoes back; with our tracker it goes to fe-trackd as a click.
The bias leans instead of choosing (gazecal.EyeWeights): on 306 live clicks the
eyes' errors partly cancelled, both together 0.65 deg off against 0.96 and 1.11
for either alone. Left or Right counts that eye twice; auto weights each eye by
its RMS miss at its last 20 nudges, since the calibration's fit picked the wrong
eye on SteamVR's test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the Own tracker, the probe polls its status each second. After the headset was off
(or the tracker restarted), it shows one dot at the centre until you look at it and press
(S skips): that click resets both eyes' shifts, so the first real clicks aren't 10-17
degrees off. The screen-to-direction geometry the calibration used is shared with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The calibration dots for the Own tracker go out to the Calibration ring angle each way on
an oval, not to the window's corners, which were too far to look at while facing the
centre. The Own tracker learns from drags up to 25 degrees (after taking the headset off
and on, its first clicks were 11-17 degrees off, and the 6-degree limit blocked them). The
probe starts on the Own tracker when it's running, and the calibration header names the
tracker.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Its fit goes wrong past its dots, and the ring (limited by the window's height) never
reached the sides, where frame-eyes' worst practice clicks were. With the Own tracker
the calibration now uses the centre, corners, and side middles of the practice area.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gaze reads frame-eyes' /dev/shm/frame-eyes-gaze and reports it as the source "own",
with each eye's gaze, where each lands on the screen, and its slip. The probe gets a
SteamVR / Own tracker toggle. With Own tracker on, it hides SteamVR's gaze and draws a
red dot per eye, its calibration fits fe-trackd's own calibration, and practice clicks
teach fe-trackd instead of the probe's correction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SteamVR's combined gaze keeps going on one eye, but it holds the lost
eye's yaw, so the gaze moves half as far sideways as the eyes do.
ft-gaze now reads each eye's tracking uncertainty and raw measurement
from eye-server.mmap. When the tracker loses an eye, ft-gazed takes the
gaze from the other one, plus the offset that eye usually shows
against both, learned while both are seen. On a recording, one eye
alone came out a median 0.8 degrees from both eyes' gaze.
Glances down at the keyboard, past every screen, aren't sent. The
pointer stays put, and eyes lost there don't count as lost.
The gaze probe gets a Headset fit mode. It shows per-eye tracking,
openness and confidence, maps where each eye gets lost, gives hints,
and has a guided check. The settings app opens it from the Gaze page
and shows how often each eye is lost. The probe can also test each eye
alone, and its side panel now collapses to a title bar so the dot
isn't hidden behind it.
Snapping to UI elements is deferred; the mouse drag is the correction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Frame controllers aren't input devices on the host, so the pointer
helper reads them with SteamVR input (vrbuttons.h, actions/), one action
set per button, and sends presses to the relay, which does the mapped
action like for a mouse button. Only mapped buttons are taken, at an
overlay-global priority (SteamVR's experimental "Enable global input from
overlays"), and only outside games unless In games is on. Frametop Input
Settings gets a Controllers page to map them.
Gaze mode: a left press while the gaze has the pointer isn't sent at
once. The pointer stops, you drag it onto what you meant with the button
held, and the release clicks there; a press held still for
POINTER_GAZE_HOLD (0.5 s) becomes a real press, for drags. The dot shows
only while the mouse moves it (POINTER_GAZE_SHOW), while a press is held,
and as a pulse per click. Outside games the pointer stays on while gaze
mode is on. ft-gazed takes a third of each lesson's offset instead of all
of it: in the first live test one 6 degree lesson moved everything and put
the next target 7 degrees off. Frametop Input Settings gets a Gaze page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Live, the tracker had lost the left eye (openness 0, set 2's eyes 9 to 14
degrees apart) and ft-gazed dropped 96% of samples as blinks. A blink is now
both eyes closing, each judged against its own recent good readings, and the
service defaults to mmap set 1, SteamVR's combined gaze, which keeps going
with one eye. With set 2, one-eye samples are still dropped, since its
combined direction is off by half of what the lost eye reads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gazed runs ft-gaze, drops blinks and dropouts, smooths with a fixation
lock, applies the probe's calibration plus what the pointer has taught
since, and sends the corrected gaze to the pointer helper at 90 Hz. The
helper sends lessons back (a nudge before a click), which are learned and
saved. It only reads the eye tracker; nothing of SteamVR's is written.
gaze/run.sh installs it as a user service that starts with SteamVR;
ft-gazectl turns gaze mode on and off and shows the service's status.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gaze reads the Frame's eye tracker (SteamVR's eyetracking action and the
two gaze sets in eye-server.mmap, read only) and prints where the gaze lands
on the Frametop screens. ft-gazeprobe is a GTK playground on top of it: a
Vision Pro style calibration run, an accuracy test, refining the correction
model from logged points, and click, drag, and snap practice that learn the
tracker's error on the fly. It also follows SteamVR's eyetracking log for
restarts and the clicks SteamVR calibrates itself from, which it keeps only
in memory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
