The correction models, filters, blink filter, and SteamVR log reader move
out of the probe so the gaze service can use them too. Two additions on the
way: the log reader follows the headset going on and off (SteamVR starts its
eye model over each time it goes on), and LiveCorrection counts lessons from
before the last time it went on less (OLD_WEAR), so the first few after
relearn the offset while the shape is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both mmap sets now add "eyes": the left and right eye's head-relative
direction, so the eyes can be calibrated separately (each has its own offset
between where the tracker says it points and where it looks). Nothing uses
it yet; it gets logged with every sample.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-gaze reads the Frame's eye tracker (SteamVR's eyetracking action and the
two gaze sets in eye-server.mmap, read only) and prints where the gaze lands
on the Frametop screens. ft-gazeprobe is a GTK playground on top of it: a
Vision Pro style calibration run, an accuracy test, refining the correction
model from logged points, and click, drag, and snap practice that learn the
tracker's error on the fly. It also follows SteamVR's eyetracking log for
restarts and the clicks SteamVR calibrates itself from, which it keeps only
in memory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
KWin's output positions now follow where the Frametop screens are in the room
instead of their numbers: a screen you see to the left of another is to its
left in Plasma, so the pointer and dragged windows cross straight to it.
Screens one above the other stack, and wrist-pinned screens go last.
ft-layout scale works this out from ft-screens' head pose and screen poses,
and runs after arranging, capturing, or pinning; ft-screens runs it half a
second after a screen is let go. With no head pose (headset off) KWin's
order is kept.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It lists what can go wrong with the relay taking the volume keys (keymaps
left remapped after a crash, the headset's click button on the same
device, wpctl stepping the default output), with key releases (a key left
held in the desktop when its release never arrives), and with keyboards
grabbed for typing (hotkey tools lose them; SHARE_KEYS is off by default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
It works but is only lightly tested, and what's left is mostly tuning its
settings. Frametop Input Settings now says so under the Head follow switch,
and the README, design notes, and button action name say it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Easing the reference toward the head all the time moved the cursor on
every small head movement, so a cursor parked in a corner of the view
drifted. Now nothing moves while the head stays within the leash. Once
the head has been past it for POINTER_LEASH_DELAY (0.2 s, so a glance
out and back doesn't count), the reference eases all the way to where
you face (POINTER_LEASH_RETURN) and the cursor lands back in its place
in the view, then the leash waits again. Leaning inside the leash no
longer moves the cursor either. Leash 0 stays head-locked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The leash only moved its reference when the head reached the leash's end,
so after turning back it sat up to the leash off, and recentring meant
overshooting with the head. The reference now eases toward the head's
facing (POINTER_LEASH_RETURN, 0.2 s) and never lags more than the leash,
so the cursor settles back to its place in the view once the head stops.
The mouse can now move the cursor up to POINTER_FOLLOW_REACH (70 degrees)
from the middle of the view, up from a fixed 40. Both are sliders on the
Pointer page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Off by default. With POINTER_FOLLOW=1 (a switch on the Pointer page of
Frametop Input Settings, or a mouse button mapped to Head follow on/off),
the cursor rides on a reference direction leashed POINTER_LEASH_DEG (10)
from where you face. Within the leash it stays put in the room; past it,
it turns with your head and keeps its offset. A leash of 0 locks it to
your view. Head roll is ignored, the cursor stays within 40 degrees of
the reference, and it holds still in the room while the left button is
down so the head can't nudge a click or a drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An ungrabbed keyboard reached both sides at once: gamescope, which in VR
reads every input device itself (the SteamOS build's InputStealer), typed
into its focused app, and ft-screens typed into the desktop. Space in the
desktop paused Spotify on the dashboard, including every space frame-voice
dictated. And while the SteamVR dashboard was open, the desktop got no
keys at all.
Typing now follows the last click. ft-screens sees clicks on its own
screens; the pointer helper reports the panel under the dot on each mouse
press, so a click on any other panel sends typing to Steam. While typing
goes to the desktop and the screens are showing, ft-screens tells the
relay every second, and the relay grabs pass-through keyboards. A grab
waits until no key is down, and the relay lets go if ft-screens stops
reporting. Controller clicks on other panels aren't visible to overlay
apps, so they don't move typing (noted in the README).
A program that reads every keyboard for a hotkey loses a grabbed one.
Repeating the keys on another input device doesn't work, since gamescope
reads that too, so with SHARE_KEYS=1 the relay sends them to
@frametop_keys as datagrams with the device name. It's off by default:
any local process that binds that name first would get every key typed
into the desktop.
The docs now say gamescope reads keyboards and the headset's buttons
itself; they said SteamVR passed keys on to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens dropped every key while the SteamVR dashboard was open or no
screen had focus, releases included. A modifier held as the dashboard
opened stayed down in the desktop, so later keys launched shortcuts
(T opened Konsole as Ctrl+Alt+T). The release of a key the desktop got
the press for now always goes through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
gamescope sends volume up and down to Steam by moving keyboard focus to
Steam for the key and back. When nothing had focus, it moves focus back to
null and wlroots aborts, which ends the whole VR session. One press of the
headset's volume button did that while working in the Frametop desktop.
The input relay now handles volume keys from every device that has them,
the headset's buttons included, and steps the default output with wpctl
(5%, repeating while held). SteamVR, which passes keys on to gamescope,
never sees a volume key: devices with a keymap (gpio-keys, USB and
Bluetooth keyboards) get only their volume entries remapped to unused
codes, so the headset's click button keeps working, and pmic_resin, which
has only volume down, is grabbed. The keymaps go back when the relay
stops, and --no-grab leaves the volume keys alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A Meta tap on a pass-through keyboard toggled the SteamVR dashboard, which
got in the way of using Meta on its own. It's now off unless
META_DASHBOARD=1 is in ~/.config/frametop.conf. Meta as a modifier
(Meta+Shift+R, Meta+Shift+H) is unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ft-screens read a screen's pose back from SteamVR right after setting it
to place its controls. SteamVR could still return the old pose, so after
Arrange now (or a layout reset) the bar and buttons stayed where the screen
had been. ft-screens now keeps each screen's pose itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Re-running the installer replaced the ft_pointer driver's files under a
running SteamVR. SteamVR then kept giving the virtual controller its hand
role but ignored its laser claim, so the mouse moved its dot without
SteamVR's laser until SteamVR restarted. The driver is now staged and only
replaced when it changed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hidden controls were taken out of SteamVR, so only ft-screens' own
proximity test could bring them back, and that test didn't match every
controller's laser. They now stay in place fully transparent while
hidden, and SteamVR's hover event on one reveals them, for any laser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The relay scanned /dev/input once a second and only probed paths it hadn't
seen. A Bluetooth mouse that disconnects and reconnects within that second
often gets the same event numbers back, so the relay never grabbed it
again and the mouse stopped working. Nodes are now tracked by inode, so
a re-created node is probed even in a known place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Frame controllers' laser comes from their render model's tip, 40
degrees below the controller pose's forward axis. ft-screens tested rays
along the pose, so a controller's laser near a screen's controls didn't
reveal them, and dragging the resize tab or the roll knob with a
controller followed the wrong point. Rays now start from the tip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The command that starts the container ran on the headset through a quoted
script, where $root isn't defined, so the installer stopped at step 2. The
repo path is passed to that script now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
install.sh: a comment with an apostrophe inside a single-quoted command
(from the distrobox pin) ended the quote and broke the script at step 1.
The VR launcher started the desktop with the Steam client's environment,
including LD_LIBRARY_PATH to Steam's runtime, whose libavcodec has no
H.264 decoder: VLC in the desktop couldn't play most videos. The session
script now drops the client's variables before starting anything, so apps
use the system's libraries and codecs.
The README and the installer now recommend setting Steam's Sleep after
(When Plugged In and Idle) to Never; Steam suspends the Frame after an
hour otherwise, even while charging.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The README drops the bold headlines on every item and reads as prose. The
reference is brought up to date and loses its bold labels. The design doc
is reorganized by topic instead of as a dated work log, keeping the
technical findings. The setup guide uses subheadings for troubleshooting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The installer clones distrobox 1.8.2.5 instead of the latest code, so an
upstream change can't break new installs. scripts/report.sh collects
versions, service states, settings, and logs for an issue, with Bluetooth
addresses and the headset serial masked. The README lists the known
limitations and how to report problems.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the pointer released, the helper still listed overlays by running
vrcmd every second, a new SteamVR client each time, which kept SteamVR
from going to standby. The list now pauses while the pointer is off.
Starting the dev container from one of our services made that service own
it, so stopping the service stopped the container and the desktop's
compositor with it. scripts/container-up.sh starts the container in a
systemd scope of its own before every distrobox enter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An awake 3D mouse pointer (a connected SteamVR controller with the laser
mode forced on) kept the displays lit after the headset came off, until 30 s
without mouse input, and any bump of the mouse woke it again. Now the helper
releases the pointer as soon as SteamVR reports the headset idle and ignores
the mouse until it's worn again. The helper service also stops in 5 s
instead of waiting 90 s for its container session.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new setting, During VR games: with Always, the screens hide while a VR
game runs and show while the SteamVR dashboard is open (the default), or
stay visible over the game. The hotkey still shows them; a game starting or
stopping resets it. Socket command: ingames hide|visible.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Visible screens kept SteamVR's laser mouse on, which takes the controllers
away from a VR game. Now, by default, that's off while a scene app runs:
the screens stay over the game and the 3D mouse or the dashboard works
them. Frametop Display Settings has the choice (always, except during VR
games, only with the dashboard open); the socket command is controllers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Commands run during the install (distrobox, ssh) read stdin, so answers
typed ahead or piped in were swallowed and the questions fell back to their
defaults. Only the questions read stdin now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The service and menu-entry templates still pointed at the old frametop/
subfolder, so the pointer helper, input relay, and settings apps couldn't
start after a clean install. The pointer helper's install step also failed
when the service was still starting after 3 s; it now waits up to 20 s and
doesn't abort the installer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Several KDE Plasma screens floating in SteamVR, each a real monitor of any
resolution and shape, shown by our own compositor (ft-screens), with a
layout, wrist pinning, and visibility modes; a Bluetooth mouse that drives
all of SteamVR as a room-anchored 3D pointer (input relay, ft-pointer
helper, ft_pointer SteamVR driver); two settings apps; and Bluetooth LE
fixes. Installs on the headset with ./install.sh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
