Screens: frame rates by attention, ticks in step with the display

ft-screens gave KWin a frame callback for every committed screen on each tick, and the tick
was an 11 ms timer set again after each run, so it slid through the display's frame and came
about 85 times a second at 90 Hz: the desktop repeated a frame several times a second (judder
in scrolling and video), and KWin drew every screen in one burst at a random point of
vrcompositor's frame. Hidden screens got the same 90 Hz unless Frametop was paused for a game.

- Ticks run on a timerfd at absolute times, once per display frame, 1 ms after the vsync
  (IVRSystem::GetTimeSinceLastVsync and the HMD's display frequency, read once a second), so
  KWin gets its callbacks early in the frame. Measured with --no-vr: 91 wakeups a second
  instead of about 85. On the Frame the vsync times SteamVR reports lie on a 90 Hz grid.
- Each screen's callbacks come at a rate for how much of it you see (vr.cpp,
  UpdateAttention): every frame while focused (within 12 degrees of where your head points,
  a laser or the mouse on it in the last 1.5 s, carried, or typed on), 15 a second for the
  rest of what you see (within 60 degrees), and 1 a second when hidden, behind you, or
  paused. Levels rise at once and fall after 1.5 s (focused) or 0.5 s (in view). KWin draws
  a screen only after its callback and its apps wait for theirs, so this throttles the apps
  too. A screen where nothing changes costs nothing at any rate, as before.
- A video in view keeps every frame: 8 commits in a row that each redraw 6% or more of the
  screen, at 10 a second or more, count as one (from the surface's buffer damage).
- "rates F V H" / --rates set the three rates (default 0 15 1, 0 = every frame), "rates?"
  shows them and each screen's level, "watch S" gives everything full rate for S seconds for
  a remote viewer (vnc-bridge.sh renews it), and "phase MS" moves the ticks for tuning.
- ft-screens' main thread runs at nice -5 after the session starts: SteamOS allows down to
  -8 once the soft RLIMIT_NICE is raised, and KWin waits on these ticks. It had spent nearly
  3 times as long waiting to run as running.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

docs/design.md

@@ -193,7 +193,7 @@ Staying awake while charging uses Steam's own setting rather than a logind sleep
 
 Hiding the screens during a game kept them out of view, but Frametop kept using the headset. Measured on 2026-10-02 with gaze mode off and no game running, in shares of one core: our eye tracker (ft-eyes) about 60%, ft-eyegrab, ft-gaze and ft-gazed about 3 to 4% each; remote desktop (krdpserver, FreeRDP, Xvnc) about 2 cores while it ran; KWin about 13%, ft-screens about 4%. The gaze service ran at full rate whether gaze mode was on or not; now it idles while the gaze isn't used (gaze/README.md), and pausing stops it outright. Reading SteamVR's eye tracking 90 times a second also made it restart every 10 to 13 seconds during Beat Saber, and each restart took input focus from the game, which paused it (PR #13; since then ft-gaze skips SteamVR's gaze action during games, but our own tracker kept running). So pausing stops what costs the most and leaves windows where they are.
 
-- A hidden screen still cost as much as a visible one. ft-screens sent every committed screen its frame callback at 90 Hz whether its overlay showed or not, so KWin kept drawing, and its apps with it. Paused, ft-screens sends the callbacks once a second. A Wayland client draws again only after its last frame's callback, so KWin's output stalls, KWin's own clients stop getting theirs, and the whole desktop idles, without anything losing its connection. A second's pace, rather than none, keeps any client that waits on a callback from waiting forever. Stopping KWin or the apps with SIGSTOP would free the same, but a Wayland peer that stops reading overflows the other side's 4 KB socket buffer, which ends the connection: that's how the live desktop died once when its KWin stalled (`Data too big for buffer`). They also sit in different cgroups (KWin under steam.service when the VR launcher starts it, ft-screens in the dev container's), so no single freeze stops them together.
+- A hidden screen still cost as much as a visible one. ft-screens sent every committed screen its frame callback at 90 Hz whether its overlay showed or not (since then, a hidden screen always gets one a second; see the frame rates in reference.md), so KWin kept drawing, and its apps with it. Paused, ft-screens sends the callbacks once a second. A Wayland client draws again only after its last frame's callback, so KWin's output stalls, KWin's own clients stop getting theirs, and the whole desktop idles, without anything losing its connection. A second's pace, rather than none, keeps any client that waits on a callback from waiting forever. Stopping KWin or the apps with SIGSTOP would free the same, but a Wayland peer that stops reading overflows the other side's 4 KB socket buffer, which ends the connection: that's how the live desktop died once when its KWin stalled (`Data too big for buffer`). They also sit in different cgroups (KWin under steam.service when the VR launcher starts it, ft-screens in the dev container's), so no single freeze stops them together.
 - The relay does the pausing because it's the one part that always runs, and the pointer helper keeps running because stopping it leaves its virtual controller connected with its last pose (the driver has no staleness timeout), maybe holding a hand role, with the 3D mouse dead. Releasing it does the job. The helper already checks for a scene app twice a second, so it's what tells the relay a game started.
 - The gesture has to work during a game, but SteamVR input reaches only the app with input focus, and an overlay with global input (`steamvr/globalActionSetPriority`) takes the buttons it binds from the game. vrserver's web socket on 127.0.0.1:27062, which its controller binding page uses for the live view, reports every controller component whatever has focus, and reading it takes nothing. The game sees the clicks too, so the default is a gesture games hardly use: both thumbsticks, together, twice. "Together" means within 0.3 seconds of each other, so a stick held down to sprint while the other clicks doesn't count. The stream is about 160 messages a second, nearly all capacitive sensing, so the reader parses only the few that mention a gesture's button. A controller's root path changes while the 3D mouse holds its hand role (`/devices/cv/<serial>` instead of `/user/hand/right`), so the reader looks the controllers up again every 3 seconds.
 - Resuming starts remote desktop through `systemd-run --scope`: started straight from the relay, it would join the relay's cgroup and end with the next relay restart.